Rear bumper Nissan Note is not just a decorative element, but a key detail that affects the safety, aerodynamics and appearance of the car. Unlike the front bumper, which is more likely to suffer from minor accidents, the rear bumper is susceptible to damage when parking, hitting curbs or rear-end collisions. At the same time, its design is Note (especially models E11 And E12) has features: integrated lights, mounting locations for parking sensors and a specific shape, which varies depending on the year of manufacture.

In this article we will look at all aspectsassociated with the rear bumper Nissan Note: from choosing between the original and analogues to step-by-step instructions for replacement and repair. You will learn how to save on spare parts without losing quality, what tools are needed for dismantling, and why bumpers for restyled versions (2013+ MY) are not interchangeable with pre-styling ones (2006–2012). We will also analyze typical mistakes when painting and give recommendations on color selection (paint code KAD for most versions).

Rear bumper design Nissan Note: features and materials

Rear bumper Nissan Note made from thermoplastic polyurethane (TPU) or polypropylene (PP) — materials that combine lightness and impact resistance. Unlike the metal bumpers of older cars, plastic parts Note They absorb shocks better, but require a special approach when repairing. For example, welding plastic is not always applicable here due to the risk of deformation.

Key design elements:

  • 🔹 Main panel — load-bearing part, attached to the body with 4–6 bolts (depending on modification).
  • 🔹 Integrated lights — on models after 2013, the rear lights are built into the bumper, which makes them difficult to replace.
  • 🔹 Holes for parking sensors — standard for configurations with the system Around View Monitor.
  • 🔹 Reinforcing beam - a metal element inside the bumper that absorbs impact energy.

It is important to consider that bumpers for Nissan Note with engines 1.4 And 1.6 may differ in fastenings due to different vehicle weights. For example, for versions with HR16DE The area of attachment to the side members has been strengthened.

⚠️ Attention: On 2016–2020 models, the bumper has mounts for a rear view camera. When replacing with a non-original part, check the compatibility of the connectors!

Original vs analogue: what to choose for Nissan Note?

The cost of the original rear bumper for Nissan Note (article 62610-4M000 for E11 or 62610-4M200 for E12) starts from 15,000 rubles and above. The price depends on the generation, color and the presence of integrated lights. An alternative is analogues from manufacturers:

  • 🚗 Febi (Germany) - high-quality plastic, but adjustments to the fasteners may be required.
  • 🚗 Dello (Japan) - optimal price/quality ratio, suitable for 90% of modifications.
  • 🚗 AMS (Taiwan) - a budget option, but there are often problems with geometry.

When choosing an analogue, pay attention to:

  1. VIN matching — specify the year of manufacture and modification (for example, Note 1.6 Acenta).
  2. Availability of certificate — parts without markings are often made from recycled plastic.
  3. Complete set — some analogues are sold without mounting clips and seals.
📊 Which bumper do you prefer for Nissan Note?
  • Original (expensive, but reliable)
  • Premium analogue (Febi, Dello)
  • Budget analogue (AMS, others)
  • There was already a non-original one - I don’t see the difference
Bumper type Average price (RUB) Pros Cons
Original (Nissan) 15 000–25 000 Perfect fit, 1 year warranty, original plastic Long wait (made to order), high price
Febi (Germany) 8 000–12 000 Quality close to the original, fast delivery There may be no holes for sensors
Dello (Japan) 6 000–9 000 Good geometry, suitable for restyling Color may differ from the original

Step-by-step instructions for replacing the rear bumper with Nissan Note

Replacing a bumper yourself takes 1.5–2 hours if tools are available. You will need:

  • 🔧 Set of heads (10 mm, 12 mm).
  • 🔧 Screwdriver with a Phillips bit.
  • 🔧 Plastic spatulas for removing clips.
  • 🔧 Jack or lift (optional).

Algorithm of actions:

  1. Disconnect the battery - this will prevent short circuits when working with headlights.
  2. Remove the tail lights (if they are integrated into the bumper): unscrew the 2 bolts from the inside of the trunk and disconnect the connector.
  3. Remove fastenings:
    • 2 bolts under rear license plate.
    • 2 bolts in the rear wheel wells (you will need to remove the fender liners).
    • 4 clips at the bottom of the bumper.
  • Remove the bumper, pulling it towards you (better with an assistant - the part is heavy).

    • Disconnect battery|

    Take a photo of the location of the clips|

    Prepare new fasteners (if the old ones are broken)|

    Check the integrity of the seals -->

    ⚠️ Attention: On models with the system ProPILOT (2018+ onwards) additional sensors are installed in the bumper. When dismantling, do not pull on the wires - there is a risk of damage to the connectors!

    Installing a new bumper is done in the reverse order. Pay special attention to:

    • 🔹 Aligning gaps — there must be a distance between the bumper and the body 3–5 mm.
    • 🔹 Tightening the bolts - tightening torque 8–10 Nm (overstretching leads to cracks).

    Rear bumper repair: welding, painting, eliminating cracks

    If the bumper is not critically damaged (cracks, scratches, dents), it can be repaired. The method depends on the type of damage:

    Cracks:

    • 🔧 Soldering plastic - suitable for polypropylene (PP). Use a soldering iron with power 60–100 W and solder of the same material.
    • 🔧 Bonding - for thermoplastic polyurethane (TPU) glue will do 3M Scotch-Weld DP8005.

    Scratches and chips:

    • 🎨 Local painting - use a can with a color code KAD (for most Note 2006–2020).
    • 🎨 Polishing - for small scratches use paste 3M Rubbing Compound.

    To paint the entire bumper you will need:

    1. Degreasing the surface (Anti-Silicone).
    2. Primer (PPG DP40 for plastic).
    3. Applying the base layer (2–3 layers).
    4. Varnish coating (Sikkens Autoclear).
    💡

    Before painting, warm up the bumper with a hair dryer until 40–50°C - this will improve the adhesion of paint to plastic.

    ⚠️ Attention: When welding plastic, do not use metal mesh for reinforcement - it will rust over time and show through the paint!

    Rear bumper tuning Nissan Note: options and cost

    Bumper tuning allows you to improve the appearance and functionality of your car. Popular options for Nissan Note:

    • 🚀 Sports bumpers - from Stillen or Nismo (price from 30,000 rub.). Add an aggressive design and improve aerodynamics.
    • 🚀 Diffusers — installed in the lower part of the bumper, giving the appearance of a “sports” car (from 5,000 rub.).
    • 🚀 LED strips — mounted in reflectors or along the contour of the bumper (set price from 2,000 rub.).
    • 🚀 Protective pads - made of aluminum or carbon fiber (from 8,000 rub.).

    When choosing tuning parts, consider:

    • 🔹 Certification — uncertified parts may not pass inspection.
    • 🔹 Material — carbon fiber is light, but fragile; aluminum is stronger, but heavier.
    • 🔹 Compatibility — some bumpers require modifications to the body (for example, cutting arches).
    What happens if you install an uncertified bumper?

    In case of an accident, the insurance company may refuse to pay if the tuning part is not included in the title. In addition, the traffic police has the right to issue a fine for making changes to the design (Article 12.5 of the Administrative Code, up to 500 rubles).

    Typical problems and their solutions

    Owners Nissan Note We often encounter the following problems related to the rear bumper:

    1. Peeling paint

    Reason: poor surface preparation before painting or use of an incompatible primer.

    Solution: clean the problem area, degrease, apply primer PPG DP40 and repaint.

    2. Cracks after a minor impact

    Reason: aging of plastic (especially important for cars 2006–2010) or improper installation.

    Solution: reinforce the bumper on the inside with fiberglass or replace it with a new one.

    3. Creaks and knocks

    Cause: worn mounting clips or loose bolts.

    Solution: replace the clips (item no. 90510-4M000) and tighten all fastenings.

    4. Fogging of lights

    Reason: leakage after replacing the bumper or damage to the seal.

    Solution: remove the canopy, dry it and apply sealant ABRO WS-904.

    💡

    Regularly check the condition of the bumper fasteners - loose bolts can cause the part to move when driving at high speeds.

    FAQ: Frequently asked questions about the rear bumper Nissan Note

    Is it possible to install a bumper from Nissan Juke on Note?

    No, these models have different body widths and mountings. Even visually the bumpers are incompatible.

    What glue is best for repairing cracks?

    For Nissan Note we recommend 3M Scotch-Weld DP8005 (for TPU) or Loctite Plastics Bonding System (for PP). Both adhesives can withstand vibration and temperature changes.

    Do I need to paint a new bumper if it is already in color?

    Original bumpers from Nissan are supplied factory painted, but analogues often require modification (polishing or varnishing). Check the color from different angles - it may differ from the body.

    How much does it cost to replace a bumper at a service center?

    The cost of work in a car service varies from 3,000 to 6,000 rubles, depending on the region and complexity (for example, the presence of a rear view camera). Self-replacement will only cost the price of consumables (clips, bolts).

    Is it possible to drive without a rear bumper?

    Technically, yes, but this violates the traffic rules (Article 12.5, Part 1 - fine 500 rub.). In addition, the absence of a bumper worsens aerodynamics and increases the risk of corrosion of exposed body parts.