Nissan Murano cabin filter: where is it located, how to change it and which one to choose?

Cabin filter in Nissan Murano - this is a small but critical detail on which the air quality in the cabin, the operation of the air conditioning system and even the health of the driver and passengers depend. Many owners are faced with a problem: the filter becomes clogged with dust, an unpleasant odor appears, and the air conditioner begins to blow weaker. However, not everyone knows Where exactly is the cabin air filter located in Murano? and how to replace it correctly.

In this article we will analyze not only the exact location of the filter in different generations Murano (Z50, Z51, Z52), but we will also tell you how to dismantle it without errors, what tools you will need, and which filter to choose - carbon or regular. You will also learn why some Murano trim levels may not have a cabin filter from the factory, and what to do in such a situation. The instructions are suitable for both beginners and experienced car owners who want to save on service.

Where is the cabin filter located in Nissan Murano: exact coordinates

Depending on the generation and delivery market (Japan, USA, Europe), the location of the cabin filter in Murano may vary slightly. However, in most cases it is located in the same place − under the glove compartment on the passenger side. More precisely, behind the decorative panel that covers the air ducts.

Specific landmarks for searching:

• 📍 Nissan Murano Z50 (2003–2007) — the filter is located behind the glove compartment, access to it is gained after removing the plastic cover (2 clips).
• 📍 Nissan Murano Z51 (2008–2014) — a similar place, but the cover can be secured with latches or a screw (depending on the configuration).
• 📍 Nissan Murano Z52 (2015–present) — the filter is shifted a little to the left, under the climate control panel. Removal of the lower part of the dashboard is required.

It is important to note that in some versions for the American market, the cabin filter may missing from factory. In this case, its seat is closed with a plug, and the filter can be installed independently by purchasing an analogue of suitable size.

⚠️ Attention! If in your Murano There is no cabin filter, don’t rush to install the first one you come across. First, check the presence of the seat and air ducts - in rare cases they may not be present at all (for example, in basic configurations for the Middle East).

Step-by-step instructions: how to remove the cabin filter in Murano

Replacing the cabin filter in Nissan Murano - a procedure that can be performed independently in 10–15 minutes, if you know the nuances. Below are universal instructions suitable for most generations. To work you will need:

• 🔧 Flat screwdriver (or plastic pick for removing clips).
• 🧴 Wet wipes or vacuum cleaner to clean the seat.
• 🔦 Flashlight (optional, for a better view).

Step 1. Preparing the interior

Open the glove compartment and remove all items from it. If your model has a damper (slow closing) glove compartment, carefully remove it by pulling it down. In some versions Murano To access the filter, you need to move the front passenger seat all the way back.

Step 2. Removing the decorative panel

Under the glove compartment you will see a plastic cover (usually black or gray). It is attached to:

• 🔹 2 clips (Z50, Z51) - pry it off with a screwdriver from both sides.
• 🔹 1 screw + clip (Z52) - First unscrew the screw, then remove the clip.

Open the glove compartment and remove the contents|

Move back the passenger seat|

Prepare a screwdriver and a flashlight |

Clean your hands from dirt (the filter is sensitive to dust) -->

Step 3: Removing the old filter

After removing the cover you will see a rectangular seat with a filter. B Murano it is usually installed vertically, so pull it down against the resistance of the seal. If the filter is stuck, do not yank it sharply - check for additional latches on the sides.

⚠️ Attention! In some trim levels Murano (especially with climate control) the filter can be secured with a plastic bracket. If you feel resistance, inspect the seat for additional fasteners.

Which cabin filter to choose for Nissan Murano: comparison of options

There are hundreds of models of cabin filters on the market for Murano, but not all of them are equally effective. Main selection criteria:

• 🔄 Filter type - regular (dust) or coal (adsorbs odors and harmful gases).
• 📏 Dimensions - must exactly match the seat (standard for Murano: ~240×200×25 mm).
• 🏷️ Brand - original (Nissan 27277-JM00A) or high-quality analogues (Mann, Bosch, Filtron).

Let's compare popular options in the table:

Filter model	Type	Service life	Price (approximate)	Features
Nissan 27277-JM00A	Coal	15–20 thousand km	1 200–1 500 ₽	Original, optimal density
Mann CU 22011	Coal	20 thousand km	800–1 000 ₽	High filtration, suitable for allergy sufferers
Bosch 1 987 429 638	Dusty	10–15 thousand km	500–700 ₽	Budget option, retains odors worse
Filtron K 1152	Coal	15 thousand km	600–800 ₽	Good price/quality ratio

If you often drive on dusty roads or live in a metropolis with high levels of pollution, we recommend choosing carbon filter. It not only traps dust, but also neutralizes exhaust gases, gasoline odors and other harmful impurities. For regions with clean air, a regular dust filter is sufficient.

Common mistakes when replacing the cabin filter in Murano

Even something as simple as replacing a filter can turn into problems if mistakes are made. Here are the most common of them:

• 🚫 Installing the filter in reverse - there is usually an arrow on the body indicating the direction of air flow (in Murano — from top to bottom).
• 🚫 Ignoring the seal — if the rubber filter surround is torn or deformed, unfiltered air will enter the cabin.
• 🚫 P buying a filter without checking the seat - in some Murano (especially after restyling) filter sizes may vary.
• 🚫 Forgetting to clean the air ducts — if you do not remove the accumulated dirt, the new filter will clog 2 times faster.

Another common problem is Damage to the cover clips during dismantling. B Murano They are often plastic and break if removed carelessly. If the clip is broken, do not try to fix the lid with adhesive tape or tape - it is better to buy a new one (clip part number: Nissan 80410-5W000).

What to do if the filter does not fit into place?

If the new filter does not fit into the seat, check:

1. Correct choice of model (check the article number).

2. Availability of additional fastenings (in some Murano there is a metal bracket that needs to be bent).

3. Deformation of the filter housing (sometimes the corners are bent during transportation).

If the problem is not solved, try bending the edges of the filter slightly (no more than 2-3 mm), but do not overdo it - this may break the seal.

When to change the cabin filter in a Nissan Murano: signs and frequency

The manufacturer recommends replacing the cabin filter at Murano every 15–20 thousand km or once a year. However, in real conditions this interval can be reduced to 8–10 thousand km, if:

• 🌆 You often drive around the city with traffic jams (high levels of exhaust gases).
• 🌳 You live in a region with high humidity (risk of mold on the filter).
• 🏗️ You regularly operate your car on dusty roads (construction sites, primers).

The following signs indicate that the filter requires replacement:

• 👃 Unpleasant smell from the air ducts when the air conditioner or heater is turned on.
• 💨 Weak air flow even at maximum fan speed.
• 🤧 Increased dustiness in the interior (dust settles on the dashboard faster than usual).
• 🌫️ Fogging of windows for no apparent reason (a clogged filter impairs air circulation).

If you notice any of these symptoms, do not delay replacement. A clogged filter not only reduces comfort, but also increases the load on the air conditioning system, which may damage the fan or evaporator.

Is it possible to drive without a cabin filter? Implications for Murano

Some owners Nissan MuranoHaving discovered that the filter is missing from the factory or has become unusable, they decide to drive without it. This highly not recommended, and here's why:

• 🦠 Dust and bacteria easily penetrate into the cabin, settling on the light passengers. Particularly dangerous for allergy sufferers and children.
• 🔧 Wear and tear of the ventilation system — dust clogs the air ducts, heater radiator and air conditioner evaporator, which leads to expensive repairs.
• 💰 Increased fuel consumption - clogged air ducts force the fan to operate at maximum power, which increases the load on the generator.
• 🚗 Unpleasant odors — without a filter, the smell of dampness and mold quickly appears in the cabin, especially after rain.

If in your Murano There is no seat for the filter, you can install it yourself. To do this you will need:

1. Purchase a filter of suitable size (for example, Mann CU 22011).
2. Cut a hole in the plastic panel under the glove compartment (using the template).
3. Install the filter and secure it with brackets or sealant.

The cost of such a modification is about 1,500–2,000 rubles (including the filter and materials), but it fully pays for itself by improving the microclimate in the cabin and protecting the climate system.

FAQ: Frequently asked questions about the Nissan Murano cabin filter

❓ How often do you need to change the cabin filter in Murano if the car is rarely used?

Even with infrequent use, the filter should be replaced once every 1–1.5 years, as it absorbs moisture and can become a breeding ground for mold. If the car is parked in a garage, it is enough to check the filter visually once every six months.

❓ Is it possible to clean the cabin filter instead of replacing it?

Technically yes, but this ineffective. Dust filters, after cleaning, lose up to 70% of their filtering capacity, and carbon filters completely lose their ability to adsorb odors. It’s better to spend 500–1,000 rubles on a new filter than to risk your health.

❓ Why did the Murano still have an unpleasant smell after replacing the filter?

The reason may be dirty air conditioner evaporator. To eliminate the odor, disinfect the system using a special spray (for example, Liqui Moly Klima-Anlagen-Reiniger) or contact the service for professional cleaning.

❓ Will the filter from Nissan X-Trail fit Murano?

No, despite the fact that the models are related, the filter sizes are different. For Murano need filter with article number 27277-JM00A or its analogues. Using the filter from X-Trail may result in a loose seal and dust entering the interior.

❓ How can I check if my Murano has a cabin filter?

Inspect the area under the glove compartment on the passenger side. If there is a plastic cover with clips or a screw, the filter is installed. If there is no cover, but instead a plug, there is no filter, but it can be installed (see section above).