Cigarette lighter does not work in...

Cigarette lighter in Nissan Juke - one of the most popular interior elements, especially if you actively use gadgets, a DVR or chargers. Its sudden failure can cause a lot of inconvenience, and in some cases, even cause more serious electrical problems. In this article we will figure out why cigarette lighter doesn't work in Juke (including models F15 And J10), how to independently diagnose a malfunction and fix it without contacting service.

It is worth noting that the problem often lies in banal things: a blown fuse, oxidized contacts or a faulty socket. However, in some cases, the wiring or even the control unit is to blame. We'll cover all possible scenarios, from simple to complex, so you can pinpoint the cause and choose the best repair method. If you are not confident in your abilities, it is better to entrust the work to professionals, but most breakdowns can be fixed with your own hands in 10-30 minutes.

The main reasons for a non-working cigarette lighter in a Nissan Juke

The first thing to do if the cigarette lighter fails is systematically check all possible causes, starting with the most obvious. In 80% of cases, the problem is solved by replacing the fuse or cleaning the contacts. Here's a full list of potential culprits:

🔥 Fuse blown - the most common reason. B Juke The cigarette lighter is protected by a separate fuse, which can burn out due to a short circuit or overload (for example, when connecting a powerful inverter).
🔌 Oxidation or contamination of contacts in the cigarette lighter socket. Over time, metal elements become coated, which impairs conductivity.
🔧 Mechanical damage to the socket - for example, if debris got into it or the contacts were bent due to careless use.
⚡ Wiring problems: open circuit, damaged insulation or poor contact in the connectors. More often occurs after unqualified repairs.
📱 Malfunction of the cigarette lighter itself (for example, the heating coil has burned out or the locking mechanism has failed).
🔋 Problems with the fuse or relay box. In rare cases, the mounting block itself is to blame, especially if the cigarette lighter stops working after wet cleaning of the interior.

Interesting fact: in Nissan Juke first generation (F15, 2010–2014) the cigarette lighter often fails due to a design feature - weak fixation of the socket in the plastic case. In newer models (J10, 2014–2019) the problem is less common, but the fuse still remains a “weak link”.

Before disassembling the panel, check whether the cigarette lighter works on other devices. For example, connect a known-good phone charger. If she also shows no signs of life, proceed to diagnosis.

📊 How often do you use the cigarette lighter in your Nissan Juke?

Daily
Several times a week
Somewhat
Only when traveling
I don't use it

Where is the cigarette lighter fuse located in a Nissan Juke?

In most cases, the fuse is to blame. IN Nissan Juke it is located in interior fuse box, which is located to the left of the steering column, behind the plastic cover. To get to it:

Open the driver's door and crouch down to see the panel under the steering wheel.
Find the plastic cover that says FUSE (or fuse pictogram). Gently pry it off with a screwdriver or your fingers.
There should be a diagram on the back of the cover indicating which fuse does what. We are looking for an inscription CIGAR or PWR OUTLET (sometimes ACC SOCKET).
B Juke this is usually the fuse 15 Amps (yellow). In some modifications it may stand on 20 A (transparent).

If there is no diagram on the cover, rely on the standard location: cigarette lighter fuse in Juke usually located in top row, closer to the center of the block. For accuracy you can use fuse diagram (see table below).

Model Nissan Juke	Year of manufacture	Fuse rating	Location in the block	Additional devices on this line
F15 (1st generation)	2010–2014	15 A	Top row, 3rd from left	—
J10 (restyling)	2014–2017	20 A	Top row, 4th from left	12V socket in trunk
J10 (after 2017)	2017–2019	15 A	Bottom row, 2nd from left	USB port (if installed)

Note: In some trim levels Juke With factory audio preparation, the cigarette lighter fuse can be combined with the radio line. In this case, its denomination is 20 A, and it is located next to the fuse AUDIO.

How to replace the cigarette lighter fuse: step-by-step instructions

If the fuse is blown, it must be replaced. For this you will need:

🔧 Tweezers (usually included with the car, in the fuse box).
🔋 New fuse on 15 A or 20 A (depending on model).
🔦 Flashlight (optional, for better visibility).

Important: Never install a fuse with a rating higher than the standard one! This may lead to fire in the wiring or failure of other electrical components.

Replacement instructions:

Turn off the ignition and make sure all electrical appliances are turned off.
Remove the fuse box cover (as described above).
Using tweezers, remove the burnt fuse. It usually has a black, burnt thread inside.
Install a new fuse same denomination. Do not use “bugs” (homemade jumpers)!
Close the unit cover and check the operation of the cigarette lighter.

If the fuse blows again after replacement, this indicates short circuit in the chain. In this case, you need to check:

🔌 The cigarette lighter socket itself for the presence of foreign objects or contact deformation.
⚡ Wiring from the cigarette lighter to the fuse box (for exposed wires or melted insulation).
🔋 Previously connected devices - perhaps one of them caused the short circuit (for example, a faulty inverter or charger).

💡

If you don’t have tweezers at hand, you can carefully remove the fuse with small pliers or even your fingers (if it is not “jammed”). The main thing is not to damage adjacent fuses.

Diagnosis of the cigarette lighter socket: cleaning and repair

If the fuse is good, but the cigarette lighter still does not work, the problem may lie in the socket itself. Over time, the contacts oxidize, become loose, or become dirty, resulting in a poor connection. Here's how to check and repair the socket:

Step 1. Visual inspection

Turn on the ignition and shine a flashlight into the cigarette lighter socket. Please note:

🔍 Foreign objects (coins, paper clips, trash).
🔥 Traces of melting or burning on metal contacts.
🔌 Bent or broken antennae inside the nest.

Step 2: Clean contacts

If the contacts are oxidized or dirty, they can be cleaned:

Disconnect the negative terminal of the battery (for safety).
Use a cotton swab soaked in alcohol or WD-40to clean the internal contacts.
For severe oxidation, fine sandpaper is suitable (zero), but be careful not to damage the coating.
After cleaning, dry the nest and check operation.

Step 3: Check the voltage

If cleaning does not help, check if there is voltage at the socket contacts. To do this:

Turn on the ignition.
Connect multimeter in DC voltage measurement mode (20V DC).
Press the red probe to central contact (plus), black - k side of the nest (minus).
The voltage should be 12–14 V. If it is not there, the problem is in the wiring or fuse box.

What to do if the contacts in the socket are broken?

If the “antennae” of the contacts inside the socket are bent or broken, you can try to carefully bend them with a thin screwdriver. If this does not help, the socket must be replaced. B Nissan Juke it is attached with latches and can be replaced in 10–15 minutes. The cost of a new nest is from 300 to 800 rubles, depending on the manufacturer.

Wiring problems: how to check and fix

If the fuse and socket are working, but the cigarette lighter still does not work, wiring check. B Nissan Juke The cigarette lighter circuit goes from the mounting block through the relay (in some modifications) directly to the socket. Most often problems arise in the following places:

🔌 Connector on the back of the socket - may oxidize or come off.
⚡ Wires under the panel — chafing of insulation or breakage (especially if repairs were previously carried out).
🔋 Cigarette lighter relay (if provided for by the design). B Juke it is rare, but in some configurations it may be.

How to check wiring:

Remove the plastic trim around the cigarette lighter (carefully pry it off with a screwdriver).
Locate the connector connected to the socket. Disconnect it and check the contacts for oxidation.
Connect the multimeter in mode calls to the connector contacts (one probe for plus, the other for minus). If the circuit is open, look for an open circuit.
Check the wires visually for damage. Pay special attention to the places where they pass through metal holes (where the insulation often frays).

If a break is detected, it can be eliminated by soldering or replacing a section of wire. To do this:

Clean the damaged area and connect the wires using soldering iron and heat shrink tube.
Insulate the repair area with electrical tape or heat shrink.
Make sure there is no short circuit (test the circuit with a multimeter).

💡

If, when checking the wiring, you find melted insulation, under no circumstances limit yourself to its insulation! Such wires must be completely replaced, as the risk of fire remains.

What to do if the cigarette lighter works but does not heat

The situation when the cigarette lighter inserted and fixed, but does not heat up, indicates a problem with heating element inside. In this case:

🔥 The spiral burned out - the most likely reason. The cigarette lighter needs to be replaced.
🔌 Poor contact between the coil and the housing - You can try to disassemble and clean it.
🔧 Mechanical failure (for example, the spring locking mechanism is broken).

How to disassemble the cigarette lighter:

Remove the cigarette lighter from the socket (it should be removed with slight force).
Carefully disassemble the case. In most cigarette lighters Nissan Juke it consists of two halves, fastened with latches.
Inspect the spiral for breaks. If it is intact, check the contacts.
If the coil burns out, replace the cigarette lighter with a new one (cost: 200 to 500 rubles).

⚠️ Attention: Do not try to repair a burnt coil by soldering! This may cause overheating and fire. Better buy a new cigarette lighter - it's cheaper and safer.

When to contact the service: difficult cases

If all of the above methods do not help, the problem may be more serious. In this case, it is better to contact specialists. Here are signs that you can’t do without the service:

⚡ The fuse blows immediately after replacement - indicates a short circuit in the circuit, which is difficult to find without diagnostic equipment.
🔋 Not only the cigarette lighter does not work, but also other electrical appliances (for example, radio or panel backlight). This may be a sign of a problem with main relay or control unit.
🔌 Wiring is damaged in a hard-to-reach place (for example, under a dashboard or in a door). Do-it-yourself repairs here are fraught with mistakes.
📱 After wet cleaning or exposure to moisture to the salon. In this case, it may be necessary to dry and replace damaged elements.

The service will carry out complete electrical circuit diagnostics Using a scanner, they will check the control unit and, if necessary, replace damaged sections of the wiring. The average cost of such diagnostics for Nissan Juke — from 1,000 to 2,500 rubles.

⚠️ Attention: If you noticed burning smell from under the panel or seen smoke, immediately disconnect the battery and contact service! These are signs of a wiring fire, and further operation of the vehicle is dangerous.

FAQ: Frequently asked questions about the cigarette lighter in Nissan Juke

Is it possible to use a cigarette lighter to connect a 220V inverter?

Technically yes, but with caveats:

The maximum power that the cigarette lighter can withstand Juke — 120–150 W (10–12.5 A). Most 220V inverters consume more, which leads to overload and fuse blown.
If you need an inverter, connect it straight to the battery via a separate fuse.

Why does the cigarette lighter work, but the phone does not charge?

Probable reasons:

🔌 Poor contact in socket — try moving the charger.
📱 Charger faulty - check it on another cigarette lighter.
🔋 Weak current - some powerful charges require at least 2.1 A, and the standard cigarette lighter can only provide 1 A.

Which fuse should I install if the standard one keeps blowing out?

If the fuse blows again, don't increase its value! This may cause a fire. Instead:

Check all connected devices for short circuits.
Inspect the wiring for damage.
If the problem is not found, contact service to diagnose the circuit.

Is it possible to install a second cigarette lighter in a Nissan Juke?

Yes, this is a popular solution among owners. Options:

🔧 Installation in the glove compartment or central tunnel — you will need to run the wiring from the main cigarette lighter or battery (through the fuse!).
🔋 USB hub - less reliable, but easier to install.

The cost of service work is from 1,500 rubles (excluding parts).

What should I do if the cigarette lighter sparks when inserted?

Sparking indicates:

🔥 Short circuit in the circuit - check the fuse and wiring.
🔌 Poor contact in the socket - clean or replace it.
🔋 Faulty devicewhich you connect (for example, charging with a short circuit).

⚠️ Don't ignore the spark - this can lead to melting of the nest or fire!

The cigarette lighter in a Nissan Juke does not work: how to find and fix the problem