Owners Nissan Murano Z51 (2015–2021) often encounter the problem of burnout of chrome body elements. Sun rays, reagents and time turn shiny parts into dull spots that spoil the appearance of the crossover. Antichrome - the optimal solution for restoring aesthetics and protecting plastic. But how to choose the material, not make a mistake with the color and install the coating correctly?

This article will help you understand the nuances: from comparing vinyl film and liquid rubber to step-by-step instructions for pasting. We analyzed owner reviews Murano Z51, material tests and common mistakes so that you get up-to-date information for 2026, taking into account the specifics of the model. Without water - only verified data and practical advice.

Why is antichrome necessary for Nissan Murano Z51?

Chrome inserts on Murano Z51 made of plastic with galvanic coating. Over time, it is destroyed under the influence of:

  • 🌞 UV radiation — leads to clouding and peeling of the top layer;
  • 🧪 Chemical reagents — salts and acids on the roads corrode chrome;
  • 🧽 Abrasive cleaning — hard brushes and polishes scratch the surface;
  • ❄️ Temperature changes — microcracks appear due to expansion/compression of the material.

According to statistics from service centers, by 5–6 years of operation 80% Murano Z51 require chrome restoration. Antichrome not only masks defects, but also prevents further destruction basics. For example, vinyl film 3M 1080 or Oracal 970RA creates a protective barrier up to thickness 120 µm, and liquid rubber Plasti Dip — elastic coating, resistant to vibrations.

⚠️ Attention: If the chrome is already peeling off in flakes, antichrome will not help - you will need to completely replace the part or restore it using the galvanic method. Film or liquid rubber is effective only on a solid but tarnished surface.

Vinyl film vs liquid rubber: which is better for Murano Z51?

The choice of material depends on the budget, service life and desired effect. Let's compare the key parameters in the table:

Criterion Vinyl film Liquid rubber
Service life 5–7 years (with proper installation) 2–3 years (requires updating)
Cost From 3,000 to 10,000 ₽ per set From 1,500 to 4,000 ₽ per 1 liter
Difficulty of installation Medium (experience or master required) Low (can be applied independently)
Scratch resistance High (due to protective varnish) Medium (soft cover)
Possibility of removal No residue (when heated) No residue (rinse off with solvent)

For Murano Z51 experts recommend:

  • 🔹 Vinyl film — if you need a long-lasting result and perfect smoothness (for example, 3M 1080 G12 "Glossy black" or Hexis HX20000 "Matte anthracite"). Suitable for full wrapping of bumpers and moldings.
  • 🔹 Liquid rubber — for a temporary solution or complex relief parts (for example, a radiator grille). Popular colors: Plasti Dip Black or DipYourCar Satin Black.
📊 What material do you prefer for antichrome?
  • Vinyl film
  • Liquid rubber
  • Powder painting
  • I don't know, I need advice

Step-by-step instructions: how to cover the chrome on a Murano Z51 with vinyl

To work you will need:

☑️ Preparing tools

Done: 0 / 7

Step 1. Dismantling and cleaning parts

Remove chrome trim (if possible) or cover adjacent surfaces with masking tape. Clean the part:

  1. Remove old wax or silicone white spirit;
  2. Sand out minor scratches with sandpaper P1000–P1500;
  3. Degrease the surface isopropyl alcohol (70%+).
⚠️ Attention: Do not use acetone or ketone-based solvents - they will destroy the plastic. Murano Z51!

Step 2. Marking and pattern

Attach the film to the part and trace the contours marker on the back side. For complex curves (such as door moldings), use the "wet lay" method:

  1. Apply a soap solution to the part (1 drop of detergent per 1 liter of water);
  2. Glue the film and expel the water with a squeegee from the center to the edges;
  3. Heat the areas with folds with a hairdryer (temperature 80–100°C).

How to avoid bubbles?

Bubbles appear due to dust or insufficient heating. If a bubble appears after installation, pierce it with a needle and smooth it out with a squeegee. For large bubbles (<5 mm), you will have to re-glue the area.

Step 3: Finishing

After installation:

  1. Trim excess film with a sharp knife at an angle 45°;
  2. Warm the edges with a hairdryer for better adhesion;
  3. Apply protective varnish (eg 3M 8518) for UV protection.

Don't wash your car 72 hours - the glue must completely polymerize.

💡

To cover the radiator grille, use perforated film (for example, Oracal 8300) - this will prevent peeling due to engine heating.

Top 5 mistakes when antichrome on Murano Z51 (and how to avoid them)

Forum analysis Drive2 And Nissan Club Russia showed that the owners Murano Z51 The most common mistakes made are:

  1. Wrong color choice. Matte black visually “eats” the crossover’s dimensions, while glossy black emphasizes irregularities. The best option - satin shade (for example, 3M 1080 G20 "Satin Charcoal"), which harmonizes with the factory body paint.
  2. Ignoring temperature conditions. The film cannot be glued at temperatures below +15°C — adhesion deteriorates by 2 times. Use a heater in the garage if you work in winter.
  3. Saving on materials. Cheap film (for example, Chinese film without a brand) turns yellow after a year and does not stretch well on bends. For Murano Z51 minimum recommended thickness - 100 µm.
  4. Incomplete surface cleaning. Residues of silicone or wax lead to peeling of the film after 3–6 months. Use anti-silicone cleaner (For example, Sonax Silicone Remover).
  5. No post-processing. The edges of the film on the moldings must be heated with a hairdryer and pressed with a roller - otherwise they will begin to lift up when washing.
💡

Before purchasing the film, test it on a small area (for example, the inside of the gas tank flap). Some vinyl materials may react with plastic Murano Z51, leaving sticky marks.

Antichrome cost: prices for 2026 and where to order

Calculation for complete pasting of chrome elements Nissan Murano Z51 (bumpers, moldings, grille, door handles):

Service/Material On your own In service (Moscow) In service (regions)
Vinyl film (3M 1080) 4 000–6 000 ₽ 12 000–18 000 ₽ 8 000–12 000 ₽
Liquid rubber (Plasti Dip) 2 500–3 500 ₽ 7 000–10 000 ₽ 5 000–7 000 ₽
Powder painting — 20 000–30 000 ₽ 15 000–20 000 ₽
Galvanic restoration — 25 000–40 000 ₽ 20 000–30 000 ₽

Where to order materials:

  • 🛒 Vinyl film: official dealers 3M or Oracal (For example, vinil-grafika.ru, autovinyl.ru);
  • 🛒 Liquid rubber: plasti-dip.ru, dipyourcar.ru or auto chemical stores;
  • 🔧 Pasting services: car styling studios with reviews on Yandex.Maps (look for mention Murano Z51 in the portfolio).

Tip: If the budget is limited, start with the most visible elements - upper radiator grille and door moldings. This will visually update the car by 80%.

Alternative methods for restoring chrome on a Murano Z51

If antichrome is not an option, consider other methods:

  1. Powder painting. The parts are removed, coated with a special powder composition and baked in an oven. Pros: service life 10+ years, scratch resistance. Cons: high price and impossibility of returning the original look.
  2. Galvanic chrome plating. Restores factory coating, but requires complete dismantling of parts. Suitable if the chrome has peeled off, but the plastic is intact. Cost - from 5 000 ₽ for one detail.
  3. Polishing + protective coating. If the chrome is just tarnished, it can be polished with paste. 3M Chrome Polish and apply a ceramic coating (for example, Ceramic Pro). The effect lasts 1–2 years.
  4. Replacement with non-chrome parts. For Murano Z51 There are original moldings in body color (article: 90501-Z5100 for the front bumper). Cost - from 8 000 ₽ per element.
⚠️ Attention: Do not use “folk” methods such as spray painting chrome or applying tint film. The paint peels off quickly due to poor adhesion to a smooth surface, and the tint bubbles when heated.

FAQ: answers to frequently asked questions about antichrome on Murano Z51

Is it possible to cover the chrome on a Murano Z51 without removing parts?

Yes, but it will complicate the process. You will have to carefully tape the adjacent surfaces with masking tape and use the "wet lay" method for an accurate fit. The risk of error is higher - if the film lies unevenly, it will be difficult to remove it without damaging the varnish.

Which antichrome color is best for the Murano Z51 in Brilliant Black?

For dark bodies we recommend:

  • 🔘 Satin graphite (3M 1080 G20) - creates contrast, but does not catch the eye;
  • 🔘 Gloss black (Oracal 970RA) - for an aggressive style;
  • 🔘 Matt anthracite (Hexis HX20000) is a universal option.

Avoid silver or golden shades - they visually “cheapen” the appearance.

How long does it take to chrome wrap a Murano Z51?

If you have experience:

  • 🕒 Radiator grille — 1–2 hours;
  • 🕒 Door moldings — 3–4 hours (for all 4 doors);
  • 🕒 Bumpers (partial wrapping) - 4–5 hours.

For beginners, we recommend splitting the process into 2-3 days to avoid mistakes.

How to care for antichrome after installation?

Rules of care:

  • 🚿 Wash your car only through 72 hours after pasting;
  • 🧴 Use contactless washing or soft sponges;
  • 🧴 Avoid wax polishes - they leave stains on vinyl;
  • 🔥 Do not park in direct sunlight for a long time (especially the first 2 weeks).

Suitable for cleaning isopropyl alcohol (30%) or specialized means (for example, 3M Vinyl Cleaner).

Is it possible to return original chrome after antichrome?

Yes, but with reservations:

  • 🔄 Vinyl film can be removed without traces if it was laid less 3 years ago;
  • 🔄 Liquid rubber removed with a solvent (for example, Plasti Dip Remover), but matte spots may remain on the plastic;
  • 🚫 If the chrome under the film continued to deteriorate, restoring the original appearance will require galvanic repair.