Battery in Nissan Qashqai J10 first generation (2007–2013) is one of those elements that sooner or later requires replacement. Even with careful use, the average battery life rarely exceeds 5–6 years, and in Russian winter conditions or frequent short trips, the battery may fail within 3–4 years. At the same time, the wrong choice of battery can lead to problems with the electronics, generator, or even failure of the on-board computer.
In this article we will analyze all the nuances of selecting a battery for the Qashqai J10: from standard parameters (capacity, starting current, dimensions) to installation features and bypassing the “protection” against incorrect replacement. You will also find step-by-step instructions with photos, tips for extending battery life and answers to frequently asked questions from owners. We will pay special attention the problem with the error “battery is discharged” after replacement - and how to avoid it without resetting the settings.
Technical characteristics of the standard Qashqai J10 battery
Factory battery installed on Nissan Qashqai J10 from the assembly line, has the following parameters:
- 🔋 Capacity: 60–70 Ah (depending on configuration and sales market). For Russia, batteries are more common 65 Ah.
- ⚡ Starting current (EN): 540–640 A. Optimal range - 580–620 A for reliable starting in cold weather.
- 📏 Dimensions (L×W×H): 242×175×190 mm (European standard
L2). Important: the height should not exceed 190 mm, otherwise the lid will not close! - 🔌 Polarity: reverse (
R+or0), that is, the “plus” on the right. - 🔧 Terminals: standard "euro" (thickness of positive terminal - 19.5 mm, negative - 17.9 mm).
On diesel versions (for example, Qashqai 1.5 dCi or 2.0 dCi) recommended battery capacity 70–75 Ah with starting current not lower 680 A - this is due to higher requirements for the starter. It is also worth considering that on machines with a system Start/Stop (if installed) required AGM or EFB battery, but in the basic J10 configuration this option is extremely rare.
If your Qashqai has an alarm system with auto start, choose a battery with a reserve capacity (+10–15 Ah from the standard one). This will reduce the risk of discharge during frequent starts in cold weather.
Which battery to choose: review of brands and models
The market offers dozens of battery options for Qashqai J10, but not all of them are equally reliable. Below are proven models from leading manufacturers that fit the parameters and have good reviews from owners:
| Brand and model | Capacity (Ah) | Starting current (A) | Type | Average price (2026) |
|---|---|---|---|---|
| Bosch S4 005 | 60 | 540 | Calcium (Ca/Ca) | 6 500–7 800 ₽ |
| Varta Blue Dynamic D24 | 60 | 540 | Calcium | 7 200–8 500 ₽ |
| Mutlu Silver Evolution 65R | 65 | 600 | Hybrid (Ca+) | 8 000–9 300 ₽ |
| Exide Premium EA654 | 65 | 640 | Calcium | 7 500–8 800 ₽ |
| Tudor High-Tech TA654 | 65 | 600 | Hybrid | 6 800–7 900 ₽ |
For regions with severe winters (below –25°C), it is better to give preference to batteries with starting current from 600 A - for example, Mutlu Silver Evolution or Exide Premium. If your budget is limited, you might consider Tudor or AkTex (Russian brand), but their service life is usually 1–2 years less than that of premium analogues.
- Bosch/Varta
- Mutlu
- Exide
- Tudor
- Other (write in comments)
- I don't know, I choose by price
Step-by-step instructions for replacing the battery on Qashqai J10
Replacing the battery with Nissan Qashqai J10 does not require special skills, but there are several critical momentsthat are often overlooked. For example, incorrectly disconnecting the terminals can lead to resetting the radio settings or errors in the operation of the on-board computer. Follow the instructions below to avoid problems.
Required tools:
- 🔧 10 mm wrench (for removing terminals).
- 🔨 13 mm wrench (for attaching the battery).
- 🧤 Gloves (battery contains acid!).
- 🧹 Brush for cleaning terminals (or sandpaper).
- 🔋 New battery (check the dimensions in advance!).
Procedure:
- Turn off the ignition and remove the key from the lock (important for resetting errors!).
- Open the hood and remove the plastic battery cover (it is secured with latches).
- Loosen the nut negative terminal (black wire) and remove it first. Then repeat with the positive (red wire).
- Unscrew the battery mount (bolt at the bottom of the battery) and remove the old battery.
- Clean the terminals and area under the battery from oxidation (use a brush or soda solution).
- Install the new battery, secure it and connect the terminals in reverse order: first plus, then minus.
- Check the operation of the electronics: start the car, check the lights, radio and on-board computer.
☑️ Preparation for battery replacement
Important nuance! After replacing the battery with Qashqai J10 an error may appear "Battery low" on the dashboard. This is due to the fact that the on-board computer “remembers” the state of the old battery. To reset the error:
- Start the engine and let it idle for 5-10 minutes.
- Turn off the ignition, then start the car again.
- If the error persists, run reset via on-board computer menu: go to
Settings → Diagnostics → Reset errors(the exact path depends on the firmware version).
What should I do if the radio does not work after replacing the battery?
If the radio requires entering a code, check the documentation for the car - the code is usually indicated on a sticker in the glove compartment or service book. If there is no code, contact your authorized dealer. Nissan with the vehicle's VIN number.
Common mistakes when replacing batteries and how to avoid them
Even experienced car owners sometimes make mistakes that lead to breakdowns or shortening the service life of a new battery. Here are the most common of them:
⚠️ Attention! Never connect a new battery if the terminals of the old battery are covered with a white coating (sulfation). This will lead to poor contact and rapid discharge. Be sure to clean the terminals and treat them special lubricant (For example, Liqui Moly Batterie-Pol-Fett).
Top 5 mistakes and their consequences:
- 🔌 Incorrect terminal connection order (first plus, then minus!). If you do the opposite, you risk a short circuit.
- 📉 Ignoring voltage check after installation. Normal value with the engine off - 12.6–12.7 V. If less, the battery is low or faulty.
- 🔧 Poor battery mounting. Vibrations from movement damage the plates inside the battery, shortening its service life.
- ❄️ Operating a discharged battery in cold weather. At temperatures below –15°C, a discharged battery may freeze, which will lead to cracks in the housing.
- 🔄 Lack of “training” of the on-board computer after replacement. This may cause the generator to operate incorrectly (it will charge the battery too intensely or weakly).
Another typical problem is loss of electronics settings (clock, climate control, seat memory). To avoid this, use portable charger (booster) or connect external power supply 12 V to the cigarette lighter before disconnecting the old battery. This will maintain voltage in the car's network.
If after replacing the battery the engine starts harder, check generator voltage (should be 13.8-14.4V when engine is running). If the value is lower, the problem is with the alternator, not the battery!
How to extend the battery life of Qashqai J10
Average battery life for Nissan Qashqai J10 - 4–5 years, but with proper care this period can be increased to 6–7 years. Here practical advicethat will help keep the battery in working condition:
1. Charge control:
- 🔋 Regularly (once every 2-3 months) check the battery voltage with a multimeter. Normal values:
- Stopped engine: 12.6–12.7 V (full charge).
- Running engine: 13.8–14.4 V (the generator charges the battery).
- 🚗 If the voltage is lower 12.4 V, recharge the battery with an external charger (charge current - no more than 10% of the battery capacity).
2. Operation in winter:
- ❄️ Before the cold weather sets in, check electrolyte density (if the battery is serviceable). Normal value - 1.27–1.29 g/cm³.
- 🔥 In frosts below –20°C, before starting the engine, turn on the high beam - this will “warm up” the electrolyte and facilitate the operation of the starter.
3. Prevention of sulfation:
- 🔄 Do it once every six months training cycle: Discharge the battery completely (for example, by turning on the headlights for 2-3 hours), and then charge it to 100%. This removes sulfate crystals from the plates.
- 🧴 Use anti-sulfation additives (For example, Hi-Gear HG7419), if the battery begins to lose capacity.
If you rarely use the car (for example, in winter), remove the negative terminal from the battery or use supporting charger (For example, CTEK MXS 5.0). This will prevent deep discharge.
Comparison of the original battery and analogues: which is better?
Many owners Qashqai J10 wondering: is it worth buying? original Nissan battery Or can we get by with an analogue? Let's compare the pros and cons of both options.
Original Nissan battery (part number 28500-JM00A or 28500-JM00B):
- ✅ Guaranteed compatibility with car electronics.
- ✅ Optimal parameters of capacity and starting current.
- ✅ Passes factory tests for vibration resistance.
Cons:
- ❌ High price (from 10,000 ₽).
- ❌ Not always in stock (especially for older models).
- ❌ Quality may be inferior to premium brands (for example, Varta or Bosch).
Analogs (for example, Varta Blue Dynamic or Mutlu Silver Evolution):
- ✅ The price is 20-30% lower than the original.
- ✅ Wider choice of capacity and technology (for example, AGM for cars with
Start/Stop). - ✅ Some brands (for example, Exide) offer an extended warranty (up to 4 years).
Cons:
- ❌ Risk of running into a fake (especially when buying online).
- ❌ Possible compatibility issues (for example, on-board computer errors).
Conclusion: if your budget allows, it’s better to choose premium analogue (For example, Varta or Bosch) - they often exceed the original in terms of resource. If a guarantee of compatibility is important, take the original battery, but check the production date (battery freshness).
Signs of a faulty Qashqai J10 battery
How to understand that the battery is yours Nissan Qashqai J10 needs replacement? Here main symptoms, which are worth paying attention to:
1. Problems starting the engine:
- 🔊 The starter turns slowly or jerkily.
- 🚗 The engine does not start the first time (especially in cold weather).
- 🔋 The indicator on the dashboard is lit
"Battery is discharged".
2. Electrical faults:
- 💡 Dim headlights or dashboard lights.
- 🔊 The radio or climate control resets the settings.
- 📻 When powerful consumers are turned on (for example, seat heating), the voltage drops.
3. External signs:
- 🔬 Swelling of the battery case (a sign of overcharging or short circuit).
- 💦 Electrolyte leaks on the terminals (white coating).
- 🔥 Smell of sulfur or acid from under the hood.
⚠️ Attention! If on the terminals appears green coating, this is a sign of copper oxidation. It needs to be removed mechanically (sandpaper) and process the terminals special lubricant, otherwise the contact will deteriorate and the battery will discharge faster.
If you notice at least 2-3 of the listed symptoms, do not delay diagnosis. A discharged battery can fail at the most inopportune moment, and a deep discharge (below 10.5 V) often leads to irreversible sulfation plates
FAQ: Frequently asked questions about the Qashqai J10 battery
Is it possible to install a battery with a larger capacity, for example, 75 Ah instead of 60 Ah?
Yes, you can, but with reservations. Generator Qashqai J10 designed to charge batteries up to 70–75 Ah, so increasing the capacity will not harm. However, please note:
- The battery dimensions must remain within the limits 242×175×190 mm.
- A capacity that is too large (e.g. 90 Ah) may result in undercharge, since the generator will not have time to replenish the charge.
Why does the “Battery Low” error appear on the dashboard after replacing the battery?
This error appears because the on-board computer Qashqai J10 “remembers” the state of the old battery. To reset it:
- Start the engine and let it run for 10 minutes.
- Turn off the ignition, then start the car again.
- If the error remains, perform a reset through the on-board computer menu (path:
Settings → Diagnostics → Reset errors).
If all else fails, contact your dealer for BC flashing.
Which battery is best for the diesel Qashqai J10 2.0 dCi?
For diesel versions, batteries with:
- Capacity 70–75 Ah.
- Inrush current not less than 680 A (optimally - 700–750 A).
- Technology AGM or EFB (if there is a system
Start/Stop).
Suitable models: Varta Silver Dynamic D59, Bosch S5 A08, Exide Premium EA770.
What to do if the new battery discharges quickly?
The reasons may be as follows:
- 🔌 Leakage current (norm - no more than 50 mA). Check with a multimeter in ammeter mode.
- 🔄 Faulty generator (check the voltage at the terminals with the engine running - it should be 13.8–14.4 V).
- 📱 Parasitic consumers (for example, a radio or GPS tracker that is not turned off).
If the problem is not resolved, contact an auto electrician for on-board network diagnostics.
Is it possible to charge the Qashqai J10 battery without removing it from the car?
Yes, but subject to safety rules:
- Disable negative terminal before charging.
- Use a charger with automatic mode (For example, CTEK MXS 5.0).
- Do not charge the battery at temperatures below 0°C.
The charging time depends on the degree of discharge, but is usually 8–12 hours at a current of 5–6 A.