Nissan March mirrors: selection, replacement and adjustment without errors

Rear view mirrors Nissan March is not just a design element, but a critical safety component. Visibility, driving comfort and even the likelihood of an accident depend on their correct settings. Owners March K13 (2010–2013) and K12 (2002–2010) often encounter problems: fog inside the interior mirror, broken side windows, or incorrect operation of the electrical adjustment. In this article we will look at how to avoid common mistakes when replacing, which mirrors are suitable for different generations March, and why cheap analogues can result in additional costs.

Feature Nissan March — compact dimensions and specific body geometry, due to which standard mirrors from other models Nissan (For example, Micra or Note) are not always suitable. We analyzed owner reviews, technical manuals and market offers to collect up-to-date information. There are no general tips here - only specific information on article numbers, compatibility and installation nuances.

Types of mirrors on Nissan March: what they are and how they differ

On Nissan March Three types of mirrors are installed: lateral external, salon interior And mirror in sun visor (optional). Each of them has its own design and fastening features.

Side mirrors are divided into:

• 🔹 Mechanical — manually adjustable from inside the cabin (basic equipment) March K12).
• 🔹 Electrical — with push-button adjustment (optional for K13 and top versions K12).
• 🔹 Heated — relevant for regions with cold climates (comes complete with electrical adjustment).
• 🔹 With turn signals - found in European and Japanese versions March.

The interior mirror can be:

• 🔸 Ordinary (flat, no auto-dimming).
• 🔸 Auto-dimming (with light sensor, rare for March).
• 🔸 With Velcro fastening (on some versions K12 after 2005).

Important: mirrors for March K12 (2002–2010) and K13 (2010–2013) not interchangeable due to different mounting and body shape. For example, a side mirror from K13 won't stand on K12 without modifications.

Article numbers and compatibility: how not to make a mistake when purchasing

When choosing a spare part, be guided by original articles or proven analogues. Below is a table with numbers for popular versions Nissan March:

Mirror type	Generation	Original article	Analogs (brand)
Side left (heated)	K13 (2010–2013)	26560-4M000	TYC (20-6236-00), Febi (26560)
Side right (without heating)	K12 (2002–2010)	26510-4M000	Depo (335-1122R-AS), Hella (8GC 008 109-121)
Salon (adhesive based)	K12 (2005–2010)	25510-4M000	Mitsuba (MR513), Valeo (255104M000)
Side with turn signal	K13 (European version)	26560-4M010	TYC (20-6236-01), APA/URO (265604M010)

⚠️ Attention: When buying analogues, check installation side (left/right) and availability electric heating. For example, a mirror with the article number 26560-4M000 not suitable for the version without heating - the power connector will be redundant, and the hole for it will have to be sealed with sealant.

For March K12 until 2005, side mirrors are mounted on three bolts, and after 2005 - to two bolts and a plastic retainer. This is critical when choosing non-original parts.

Step-by-step instructions: how to remove and install a side mirror

Replacing the side mirror with Nissan March takes 20–40 minutes depending on the type of fastening. You will need:

• 🔧 Phillips screwdriver (PH2).
• 🔧 10 mm socket wrench (for fastening bolts).
• 🔧 Plastic puller or flat screwdriver (for removing door trim).
• 🔧 Sealant (for example, ABRO GS-1000) for processing joints.

📌 Procedure:

1. Disconnect the negative terminal of the battery (if the mirror is electric).
2. Remove the inner door trim, starting from the bottom corner (carefully pry up the clips).
3. Disconnect the power connector (if any) and unscrew the mirror mounting bolts (2 or 3 pieces).
4. Remove the old mirror, clean the seat from rust and sealant.
5. Install a new mirror, tighten the bolts (tightening torque - 8–10 Nm).
6. Connect the connector, check the operation of the adjustment and heating.
7. Reinstall the door trim.

Disconnect battery|

Take a photo of the power connector|

Check the completeness of the new mirror (bolts, seals)|

Prepare sealant and tools -->

⚠️ Attention: On March K13 with electrical adjustment may be required after replacing the mirror error reset in the control unit. To do this:

1. Turn on the ignition.
2. Press and hold the mirror adjustment button in the highest position for 10 seconds.
3. Turn off the ignition, then turn it on again.

If the mirror does not respond to the buttons, check the fuse F30 (10A) in the mounting block (located under the steering wheel on the left).

Problems with the interior mirror: fog, peeling, replacement

Interior mirror on Nissan March often suffers from condensate (especially in wet weather) or detachment of fasteners. Causes and solutions:

🔹 Fog inside the mirror: occurs due to depressurization. A temporary solution is to dry it with a hair dryer (temperature up to 50°C), but it is better to replace the mirror. Original articles: 25510-4M000 (adhesive mount) or 25510-4M010 (in stiletto heels).

🔹 The mirror falls off: on K12 After 2005, Velcro fastenings lose adhesion over time. The solution is to clean the surface with alcohol and use 3M double sided tape or epoxy glue.

🔹 Cracked glass: Only glass can be replaced (item no. 25515-4M000), but it is often cheaper to buy a complete mirror.

⚠️ Attention: When replacing the interior mirror with March K13 with rain sensor (optional) Do not use glue with an aggressive composition (for example, “Moment”) - it will damage the sensor. Use neutral silicone-based sealants.

How to remove the interior mirror without damage?

1. Pry off the plastic fastening cover with a flat screwdriver (it is latched).

2. Unscrew the screw with an 8 mm socket wrench (if the mount is on a stud).

3. Carefully remove the mirror by disconnecting the backlight connector (if equipped).

4. For adhesive fastening, use fishing line or thin wire to “cut through” the old adhesive.

Electrically adjustable mirrors: faults and repairs

If the mirrors are on Nissan March stopped moving when pressing buttons, the reasons may be as follows:

• 🔋 Fuse blown (F30 10A - responsible for the drives of mirrors and window lifts).
• 🔌 Contacts have oxidized in the door connector (a common problem after washing).
• ⚙️ The motor is broken in the mirror mechanism (characteristic crackling sound when pressing the button).
• 🎛️ The control unit is faulty (rare, but found on K13).

📌 Diagnostics:

1. Check the fuse and replace if necessary.
2. Remove the door trim and inspect the connector: if there is a green coating, clean the contacts with sandpaper (grit 600–800).
3. Apply 12V voltage directly to the mirror motor (red wire - “+”, black - “-”). If it doesn't work, the mechanism needs to be replaced.

💡 Advice: On March K12 mirror motors are interchangeable with Nissan Micra K12 (article 26550-4M000). The cost of a new one is about 1,500–2,000 rubles, a used one is 500–800 rubles.

Tuning and modifications: what can be done with mirrors

Owners Nissan March Mirrors are often upgraded to improve functionality or appearance. Popular improvements:

🔧 Installation of turn signal indicators:

• 🔸 Suitable mirrors from Nissan Note E11 (article 26560-4M010) - they are compatible for mounting and have ready-made holes for lamps.
• 🔸 The wiring will require modification: connection to the standard turn signal circuit (use a relay 12V 10A for protection).

🔧 Replacement with auto-dimming mirrors:

• 🔸 A universal solution from Gentex (model 111), but you will need to connect to the dimensions to power the sensor.
• 🔸 Auto-dimming side mirrors (for example, from Toyota Yaris) are not compatible without modification of the mount.

🔧 Rear view camera installation:

• 🔸 The camera can be built into the left mirror (for example, model Boyo VTK170). To do this, you will need to drill a hole with a diameter of 16 mm and pull the wiring through the door pillar.
• 🔸 Connection - to a monitor or standard radio (if it supports AV-in).

⚠️ Attention: When installing non-standard heated mirrors, check current consumption. If it exceeds 2A, standard wiring March may not withstand - an additional relay will be required.

Common mistakes when working with mirrors and how to avoid them

Even experienced car owners make mistakes that lead to breakdowns or additional costs. Let's consider typical cases:

🚫 Using incompatible mirrors:

• 🔴 Mirrors from Nissan Almera N16 They are similar in appearance, but have a different mount and viewing angle.
• 🔴 Mirrors from Renault Clio II do not match the heating connector (different polarity).

🚫 Incorrect adjustment:

• 🔴 On March K13 mirrors are adjustable only when the ignition is on. If you try to tune with the engine turned off, you may burn the fuse.
• 🔴 Optimal viewing angle: should be visible in the side mirror 1/4 rear fender and the road to the horizon.

🚫 Ignoring sealing:

• 🔴 Without sealant, moisture will get into the mirror mount, which will lead to corrosion of the bolts and short circuit (relevant for heated mirrors).
• 🔴 Use glass sealant (For example, Teroson MS 9399), and not ordinary silicone - it does not withstand vibrations.

FAQ: answers to frequently asked questions

Can heated mirrors be installed on the base version of the March K12?

Yes, but you will need:

1. Buy heated mirrors (item number 26510-4M020 for driver's license).
2. Route the wiring from the fuse F20 (15A) via relay.
3. Install a power button in the cabin (for example, next to the heated glass button).

Cost of modification: ~3,000–5,000 ₽ (including materials).

Why does the right mirror on the March K13 vibrate at speeds above 100 km/h?

Reasons:

• 🔹 The fastening bolts have loosened (tighten to 10 Nm).
• 🔹 Wear of plastic bushings in the adjustment mechanism (replacement of the mirror assembly required).
• 🔹 Deformation of the bracket after an accident (check the body geometry).

A temporary solution is to stick it on the inside of the mirror. vibration-absorbing tape (For example, Dynamat).

How to adjust the interior mirror if it is constantly blinding at night?

Options:

1. Adjust the tilt angle: the top edge of the mirror should “look” at the rear window, and not at the ceiling.
2. Install anti-glare film (For example, 3M Night Vision).
3. Replace the mirror with an auto-dimming model (suitable from Nissan Tiida, article 25510-4M100).

What should I do if the heating does not work after replacing the mirror?

Check:

• 🔹 Connection polarity (on March “+” — red wire, “–” — black).
• 🔹 Fuse integrity F20 (15A).
• 🔹 Presence of voltage on the connector (must be 12V with the ignition on).

If the heating still does not work, the problem is heating element inside the mirror - it cannot be repaired, only the glass must be replaced.

Will a Nissan Juke mirror fit a March K13?

No, the mirrors are from Juke have a different shape and fastening. However, you can use glass from Juke (article 26505-4M000) to replace a broken one if the geometry matches. But it's better to look for the original March.