Left mirror Nissan Qashqai J10: how to choose and replace correctly

Left side mirror on Nissan Qashqai J10 (2007–2013) - a part that often suffers from mechanical damage, corrosion or electronic failure (if a heated and electrically driven version is installed). Owners are faced with the need for replacement due to cracks in the plastic, broken glass, or a faulty folding mechanism. However, not everyone knows that the choice of mirror depends not only on the year of manufacture, but also on the vehicle’s equipment, as well as the market for which it was intended.

In this article we will look at how choose the right left mirror for Qashqai J10, what article numbers of original spare parts exist, what analogues are suitable, and we will also give step-by-step instructions for replacement, taking into account typical errors. We will pay special attention to the nuances of electronics - why heating or adjustment may not work after installing a new mirror, and how to fix it.

Original articles and their decoding

On Nissan Qashqai J10 The left rear view mirror has different part numbers depending on the configuration and market. Main original numbers:

• 🔧 26520-JM00A — basic version without heating and electric drive (for European and Russian markets).
• ⚡ 26520-JM01A — Electrically adjustable mirror, but not heated.
• 🔥 26520-JM02A — version with heating and electric drive (installed on the configuration Tekna And Acenta Premium).
• 🌍 26520-JM03A — mirror for the markets of the Middle East and Asia (may differ in shape and mounting).

Important: Article numbers may vary depending on Vehicle VIN code. For example, if your Qashqai assembled for the Japanese market (JDM), the original mirror may not fit the European version due to differences in wiring connectors. Please check compatibility before purchasing VIN through services like Nissan TechInfo.

⚠️ Attention: Heated mirrors (26520-JM02A) require connection to the control unit BCM. If after replacement the heating does not work, check the fuse F37 (10A) in the mounting block and the integrity of the wiring to the connector C104.

Article	Mirror type	Compatible configurations	Notes
26520-JM00A	Mechanical (without heating)	Visia, Acenta (basic)	The cheapest option, but without electronics.
26520-JM01A	Electric adjustment drive	Acenta, N-Tec	Requires connection to the mirror control unit.
26520-JM02A	Electric drive + heating	Tekna, Acenta Premium	More expensive than analogues, but fully compatible with electronics.

Analogs and non-original spare parts: what to choose?

Original mirrors from Nissan are expensive (from 8,000 to 15,000 rubles), so many owners consider analogues. Among the trusted manufacturers:

• 🏆 Febi (article 26520) is a German brand that offers electric mirrors at a price 30% lower than the original.
• 🔧 Hella (series 8DL 355 009-001) - high-quality heated analogs, but may differ in the plastic fastening.
• 💰 Dello (article 3030S0003) is a budget option, but there are often complaints about the durability of the folding mechanism.
• 🌐 Japanese parts - mirrors from disassembly (price from 3,000 rubles), but the risk of buying a broken part is high.

When choosing an analogue, pay attention to:

1. Mounting type - on Qashqai J10 A triangular bracket with three fixation points is used. Some analogues (for example, from Renault Koleos) are similar in appearance, but are not suitable for mounting.
2. Wiring connector — power mirrors must have a 6-pin connector (Nissan 28450-JM000). If the connector is different, re-soldering will be required.
3. Glass shape — European and Asian versions may have different curvature, which will affect the review.

Step-by-step instructions for replacing the left mirror

Replacing the mirror with Nissan Qashqai J10 does not require special tools, but it is important to follow the algorithm so as not to damage the wiring or plastic clips. You will need:

• 🔧 Phillips screwdriver (for removing door trim).
• 🔨 Plastic puller or flat screwdriver (for clips).
• 🔌 Tester or multimeter (to check power supply).

Step 1: Removing the Door Trim

Remove the two screws at the bottom of the casing (under the handle and next to the speaker). Then carefully pry the clips around the perimeter, starting from the bottom corner. Be careful - the clips are fragile and easy to break. After removing the trim, disconnect the connectors from the control units (if they interfere with access to the mirror).

Step 2: Removing the Mirror

On the inside of the door you will see three nuts on 10 mm, attaching the mirror. Unscrew them, then carefully pull the mirror out by pulling on the base. Do not pull on the glass - you may damage the mechanism! Disconnect the wiring connector (it is secured with a plastic clip that needs to be snapped off).

Step 3: Installing a New Mirror

Connect the connector to the new mirror, then install it in place, securing it with nuts. Tighten them crosswise to avoid distortion. After installation, check the operation of the electric drive (if any) and heating. If something doesn't work, check:

• 🔌 Fuse F37 (responsible for heating).
• 🔧 Wiring integrity from door to block BCM (often frayed into corrugation).
• 📶 Error code in the control unit (if the mirror is not adjustable, you may need to reset the settings via Nissan Consult).

What should I do if the mirror does not fold after replacement?

Check whether the connector is fully connected - often it does not lock in place due to a worn clamp. Also inspect the gears of the folding mechanism: on used mirrors they may be broken. If the problem is electronic, check the relay K10 in the mounting block (responsible for mirror drives).

Typical problems and their solutions

Even after proper replacement, owners Qashqai J10 encounter mirror malfunctions. Let's look at the most common ones:

1. Heating does not work

Reasons:

• 🔥 Fuse blown F37 (10A).
• 🔌 Broken wire in the corrugation between the door and the counter.
• 📉 Control unit is faulty BCM (less often).

Solution: Test the wire from the mirror to the fuse box with a tester. If there is power, but the heating does not work, the problem is in the mirror itself (the heating element may have burned out).

2. The mirror is not adjustable from the button

Reasons:

• 🔧 Oxidation of contacts in the mirror connector.
• 🖥️ Failure in the mirror control unit (re-flashing required).
• 🔄 The connector is connected incorrectly (the pins are mixed up).

Solution: Remove the mirror and check the contacts. If the problem is in the control unit, try resetting by disconnecting the battery for 10 minutes.

⚠️ Attention: If after replacing the mirror Folds up on its own when the car is locked, but does not turn back - the problem is in the settings of the comfort block. Reset requires diagnostic equipment (e.g. Launch X431).

How to avoid corrosion and extend the life of a mirror

Left mirror on Qashqai J10 often suffers from corrosion due to poor sealing of the fastening. To avoid rust:

• 🛡️ After washing, dry the mirror, especially where it is attached to the door.
• 🧴 Apply once every six months silicone grease to the folding mechanism.
• 🔧 Check the integrity of the rubber seal between the mirror and the door (article no. 80310-JM000).
• 🌧️ During the winter period, clear snow and ice with a plastic scraper so as not to damage the glass.

If corrosion has already appeared, remove it rust converter (For example, WD-40 Specialist), then paint the problem area in body color. For protection you can use anti-gravel film on the base of the mirror.

Where to buy and how much does a replacement cost in the service?

Prices for left mirror for Nissan Qashqai J10 vary depending on type and manufacturer:

Mirror type	Price (original)	Price (analog)	Cost of work in the service
Mechanical (without heating)	6 000 — 8 000 ₽	2 500 — 4 000 ₽	1 500 — 2 000 ₽
Electrically driven	10 000 — 12 000 ₽	5 000 — 7 000 ₽	2 000 — 2 500 ₽
Heated and electrically driven	13 000 — 15 000 ₽	7 000 — 9 000 ₽	2 500 — 3 000 ₽

Where to buy:

• 🏬 Official dealers - warranty on original parts, but high price.
• 🌍 Online stores (For example, Exist.ru, Autodoc) - a wide selection of analogues.
• 🔄 Showdown - the cheapest, but there is a risk of buying a broken part (check the functionality before paying!).

The cost of replacement service depends on the complexity:

• 🔧 Replacement of a mechanical mirror - from 1,500 rubles.
• ⚡ Replacement of an electric mirror - from 2,500 rubles (electronics check required).
• 🛠️ If you need to solder wires or configure a control unit - up to 5,000 rubles.

Frequently asked questions about the left mirror of the Qashqai J10

Is it possible to install a heated mirror instead of a regular one?

Yes, but you will need:

1. Lay additional wiring from the fuse box (+12V power supply from F37).
2. Connect the wire to the heating button (if it doesn’t exist, you’ll have to buy it in addition).
3. In some cases, unit firmware is required BCM to recognize a new function.

Without these modifications, heating will not work.

Why does a new mirror squeak when folded?

The creaking occurs due to:

• 🔧 Lack of lubrication in the mechanism - treat the gears with silicone grease.
• 🔨 Misalignment during installation — check the uniform tightening of the nuts.
• 🧩 Wear of plastic bushings in the mechanism (relevant for used mirrors).

How to remove mirror glass without damaging it?

To remove glass:

1. Heat the mirror with a hairdryer (temperature 50–60°C) to soften the glue.
2. Carefully pry the glass with a plastic spatula, starting from the top corner.
3. After removal, clean the base of old glue with acetone.

To install use 3M double sided tape or special glue for auto glass.

Where is the relay that controls folding the mirrors?

Relay K10 located in the mounting block under the steering wheel (to the left of the steering column). It is responsible for powering the mirror drives. If the mirrors do not fold, check:

• Relay integrity (check with a multimeter).
• Availability of power on contact 85 (should be +12V when the ignition is on).

Is it possible to paint the plastic of the mirror to match the body color?

Yes, but:

• Use plastic primer before painting.
• Choose paint based on your color code Qashqai (For example, KH3 for silver metallic).
• After painting, apply matte varnish for protection against chipping.

The cost of painting in the service is from 3,000 rubles.