Rear view mirror Nissan Almera G15: selection, replacement and common mistakes

Mirror elements on Nissan Almera G15 is not just an accessory, but a critical safety component. Damage to the side mirror (whether it is a cracked glass, broken housing or malfunction of the electric drive) can lead to a fine from the traffic police or, worse, an accident due to limited visibility. Owners of this model often encounter problems: from a banal “knocked down” mirror in the parking lot to failure of the heating or folding mechanism.

In this article we will look at all aspects of working with mirrors on Almera G15 — from the selection of original and analog spare parts to step-by-step replacement, taking into account the nuances of electrical wiring. We will pay special attention hidden fastening bolts, which often break during unqualified dismantling, and common mistakes when connecting connectors. The material will be useful for both beginners and experienced car owners who want to save money on service stations.

Design of mirrors on Nissan Almera G15: what's inside?

Mirrors on Almera G15 (2012–2019) have a modular design, which depends on the vehicle configuration. Basic versions are equipped with simple mechanical mirrors with manual adjustment, while top versions (Tekna, SV) receive:

• 🔌 Electric drive adjustments (with joystick on the driver's door)
• 🔥 Heating (integrated into the glass, activated together with the rear wiper)
• 🔄 Electric folding (optional for European and Japanese markets)
• 🚨 Turn signal (built into the mirror housing, connected to standard wiring)

It is important to understand that even within the same configuration, mirrors may differ! For example, Almera G15 for Russia it often came with simplified mirrors without folding, while copies for Europe were equipped with a full set of functions. This affects the interchangeability of parts and prices.

The internal structure of the mirror includes:

• 🔧 Housing (ABS plastic, attached with 3–4 bolts to the door)
• 🖥️ Adjustment mechanism (gears and motors for electric drive)
• 🔋 Control board (for heated and folding mirrors)
• 💡 Repeater lamp (LED or halogen, depending on year of manufacture)

Article numbers and interchangeability: how not to make mistakes when purchasing

Original mirrors for Nissan Almera G15 are produced under the brand Nissan (items start with 265 or 968) and are available in two versions:

• 🚗 Left mirror (driver's side) - article number 26501-JM00A (basic version) or 26501-JM01A (electrically driven)
• 🚙 Right mirror (passenger side) - article number 26502-JM00A or 26502-JM01A

However, original parts are expensive (from 8,000 to 15,000 rubles apiece), so many owners choose analogues. Among the trusted manufacturers:

Brand	Article (left)	Article (right)	Price, rub.	Features
Febi	265010	265020	4 200–5 500	High-quality plastic, but poor heating
Hella	8DL 355 009-041	8DL 355 010-041	6 000–7 500	Original quality but rarely in stock
TYC	20-6501-00	20-6502-00	3 500–4 800	Budget option, possible problems with the electric drive

⚠️ Attention: When buying an analogue, be sure to check presence of heating connector (if it is included in your configuration). Some cheap mirrors are identical in appearance to the original, but do not have contacts for connecting heating - this will lead to an error on the instrument panel!

Also consider case color: mirrors for Almera G15 released in black (BLK) and gray (GRY) performance. Articles may differ even with identical functionality.

Step-by-step mirror replacement: from dismantling to installation

Replacing the mirror with Nissan Almera G15 does not require special tools, but will require caution - especially when working with electrical wiring. Below is a universal instruction suitable for all configurations.

Step 1: Removing the door trim

Start by removing the plastic trim on the inside of the door. To do this:

1. Unscrew the screw under the door handle (hidden under the decorative plug).
2. Using a screwdriver, carefully pry the clips around the perimeter of the panel, starting from the bottom corner.
3. Disconnect the wiring connectors (for the power window buttons and speaker, if equipped).

Step 2. Removing the old mirror

After removing the trim, you will see three mirror mounting bolts (10 mm socket). Be careful: one of the bolts often sticks - do not use excessive force so as not to break the thread in the door! After unscrewing the bolts, disconnect the wiring connector (it can be secured with a plastic clip).

What to do if the bolt breaks?

If the bolt breaks off, do not try to drill it out yourself - this may damage the window lift mechanism. It is better to use an extractor or contact a service station to restore the thread.

Step 3. Install a new mirror

Before installing a new mirror:

• 🔌 Check the integrity of the wiring (especially if the mirror did not work before replacement).
• 🧲 If necessary, clean the connector contacts from oxidation (use WD-40 or alcohol).
• 🔧 Make sure that the rubber gasket between the mirror and the door is in place - it prevents moisture from entering.

Connect the connector, fix the mirror with bolts (tightening torque - 8–10 Nm) and reassemble the casing in the reverse order.

Typical problems and their solutions

Even after correctly replacing the mirror with Almera G15 Malfunctions may occur. Let's look at the most common ones:

⚠️ Attention: If after replacement the mirror is not adjustable using the joystick, but the heating works, the problem is blown fuse F32 (10A) in the block under the steering wheel. Do not replace it with a fuse of a higher rating!

Problem	Possible reason	Solution
Mirror doesn't fold	Broken wire in the door corrugation	Test the wiring with a multimeter, replace the corrugation
Heating does not work	Oxidation of contacts on the board	Disassemble the mirror, clean the contacts
Spontaneous movement of the mirror	Short circuit in joystick control	Replace the joystick (part no. 25540-JM00A)
Crackling sound when adjusting	Wear of mechanism gears	Lubricate the mechanism with silicone grease or replace the mirror

The problem with turn signal repeaters. If the lamp does not light, check:

• 💡 Lamp (some mirrors use W5W, in others - LED).
• 🔌 Fuse F19 (7.5A) — he is responsible for the repeater chain.
• 📶 Mass on the mirror body (often oxidizes).

Heated mirrors: how to check and repair

Heated mirrors on Almera G15 is activated automatically when the rear window heating is turned on. If it doesn't work, the problem may lie in:

1. fuse (F30, 15A in the block under the hood).
2. Relay heating (located next to fuse F30).
3. Wiring from the door to the body (often frayed into corrugation).
4. Heating element inside the mirror.

For diagnostics:

1. Turn on the heated rear window and check the voltage at the mirror connector contacts (there should be 12V).
2. If there is voltage, but the mirror does not heat up, the problem is heating layer (glass replacement required).
3. If there is no voltage, check the wiring from the door to the fuse box.

For a temporary solution (for example, on the road) you can use tailor's pins to close the heater contacts directly, but this is fraught with overheating and fire!

Electric folding: repair nuances

Electric folding mirrors (power folding) - weak point Almera G15 in top trim levels. Frequent problems:

• 🔋 Mechanism jamming due to corrosion (especially in winter).
• 🔌 Broken wires in the corrugation of the door (symptom - the mirror folds in only one direction).
• 🖥️ Microswitch failure (the mirror is not fixed when folded).

To repair the folding mechanism:

1. Remove the mirror and disassemble the housing (carefully - there are a lot of small plastic parts inside!).
2. Check gears for wear. Lubrication often helps Liqui Moly Silberfett.
3. If the problem is in the motor, replace it (part number 26550-JM00A).

⚠️ Attention: Do not attempt to disassemble the folding mechanism without first disconnecting the battery! Unlike adjustment, here we use permanent magnets, which can damage electronics if short-circuited.

Frequently Asked Questions

Is it possible to install a power mirror instead of a mechanical one?

Yes, but you will need:

1. Laying the wiring from the door to the control unit (use corrugation from Nissan Note - it fits in diameter).
2. Installation of the control joystick (part number 25540-JM00A) and connecting it to the standard wiring.
3. Block firmware BCM (in some cases required to recognize new equipment).

The cost of re-equipment is from 15,000 rubles (including spare parts and labor).

Why does the heating not work after replacing the mirror, but there is an adjustment?

This is a typical problem when purchasing a non-original mirror. In 90% of cases the reason is no contacts for heating in the analog connector. Solutions:

• Return the mirror to the seller and demand the original.
• Resolder the heating contacts directly (soldering iron skills are required).
• Turn off heating in the block BCM (so that the error does not appear on the panel).

How to remove mirror glass without damaging the heating?

To do this:

1. Heat the mirror with a hairdryer (temperature 50–60°C) - this will soften the glue.
2. Carefully pry the glass with a plastic spatula, starting from the top corner.
3. Disconnect the heating connectors (they are glued to the glass with double-sided tape).

⚠️ Do not use metal tools - they will damage the heating film!

Where is the mirror fuse located on Almera G15?

Fuses for mirrors:

• F32 (10A) — electric adjustment (fuse box under the steering wheel).
• F30 (15A) — Heated mirrors (unit under the hood).
• F19 (7.5A) — Turn signal repeaters (unit under the steering wheel).

The fuse box diagram is in the owner's manual (page 8-12).

Can the mirror body be painted a different color?

Yes, but:

• Use only flexible paints for plastic (eg Motip Flexible Bumper Paint).
• Before painting, degrease the surface and apply plastic primer.
• After painting, protect the mirror with clear varnish - this will prevent fading.

The cost of painting in the service is from 3,000 rubles for one mirror.