Nissan Teana - a car that is valued for comfort and reliability, but even in it the cabin filter requires regular replacement. If you notice that there is an unpleasant odor in the cabin and the air conditioner is working less efficiently, it’s time to do this procedure. Unlike many European cars, where the filter is hidden behind the glove compartment, in Teana access to it is organized differently - and this often raises questions among owners.
In this article you will find detailed instructions with photos and videos, relevant for models J31 (2008–2013) and J32 (2013–2020), including restyled versions. We will analyze which filter to choose (carbon or regular), how to avoid typical mistakes when replacing, and why ignoring this procedure can result in failure of the heater fan due to dirt getting into the system. You will also learn how to save up to 3,000 rubles by doing everything yourself instead of contacting a service.
When to change the cabin filter Nissan Teana?
The manufacturer recommends replacement every 15,000 km or once a year, but in practice the period depends on operating conditions. If you often drive on dusty roads, in a metropolis with high levels of smog, or during flowering periods, the filter may become clogged after 8–10 thousand km.
Signs that the filter needs replacing:
- 🌬️ Weak air flow from the deflectors even at maximum fan speed.
- 👃 Persistent odor of mold or dust when you turn on the air conditioner or heater.
- 💨 Constant fogging of windows, even in dry weather.
- 🚗 Increased noise fan operation (whistle, hum).
On Teana J32 (after 2013) the climate control system is more sensitive to filter contamination. If you ignore replacement, the air quality sensors may begin to work incorrectly, and in some cases an error light appears on the panel C1140 (malfunction of the ventilation system).
- Every 10,000 km
- Once a year
- Only when the smell appears
- Never changed
- Another option
Which cabin filter to choose for Nissan Teana?
Filters for Teana J31 And J32 interchangeable in size, but different in composition. There are three main types:
| Filter type | Article (original) | Analogues | Service life | Price, rub. |
|---|---|---|---|---|
| Normal (dust) | 27277-JM00A |
Mann CU22003, Bosch 1 987 429 636, Filtron K1152 | 6–12 months | 400–800 |
| Coal | 27277-JM00B |
Mann CUK22003, Bosch 1 987 429 656, TSN 9.7.864 | 12–18 months | 900–1 500 |
| Carbon with antibacterial impregnation | 27277-4M50A (for J32) |
Denso DCF368P, Mahle LAK959 | 18–24 months | 1 200–2 000 |
Optimal for most regions of Russia carbon filter — it not only traps dust, but also neutralizes harmful gases (for example, exhaust in traffic jams) and unpleasant odors. If you live in an ecologically clean area, you can limit yourself to a regular dust filter.
⚠️ Attention! On Teana J32 with the system Nissan Connect (multimedia with navigation) when installing a non-original low-quality filter, a false warning may be triggered about"Air pollution in the cabin". This is due to the operation of the sensorAQS(Air Quality Sensor).
Before purchasing, check whether the filter fits in size: the original has dimensions 210 × 200 × 25 mm. Some analogues (for example, Filtron K1152) can be 1–2 mm wider - this is not critical, since the filter body is flexible.
If you buy a filter in an online store, pay attention to reviews about the smell - cheap carbon filters sometimes smell like “chemicals” for the first 1–2 weeks after installation.
Where is the cabin filter located? Nissan Teana?
Unlike many cars, where the filter is located behind the glove compartment, in Teana it's hidden under the center console on the passenger side. Exact location:
- 📍 Under the plastic cover at the feet of the front passenger.
- 🔧 To gain access, you need to remove decorative overlay (it is attached to two clips).
- 🔄 On Teana J31 black cover on J32 - gray, with inscription
"AIR FILTER".
Many owners confuse the cabin filter with air conditioner filter, which is located in a different location (in the engine compartment, next to the radiator). These are different parts! The cabin filter cleans the air entering the cabin, and the air conditioning filter cleans the coolant.
The photo below shows the exact location (click to enlarge):
Photo of the filter location (clickable)
[There would be a picture here showing arrows to the filter cover and mounting clips]
Step-by-step instructions for replacing the cabin filter
The procedure takes 10–15 minutes and does not require special tools. You will need:
- 🔧 Flat screwdriver (or plastic pick for removing clips).
- 🧹 Vacuum cleaner or damp cloth to clean the case.
- 📦 New filter (check for integrity before installation!).
Step 1. Preparation
Park the car on a level surface and turn off the ignition. It is also recommended to remove the battery terminal (negative) to avoid accidental activation of the fan when removing the filter.
Step 2. Removing the decorative trim
Carefully pry with a screwdriver or pick two clips (located on the sides of the lining). On Teana J32 clips are more fragile, so proceed with caution. After removing the cover you will see a black plastic filter cover.
Is the battery terminal disconnected?|
Was the decorative trim removed without damage?|
Do you have a vacuum cleaner handy to clean the case?|
Has the new filter been checked for defects?-->
Step 3: Removing the old filter
Open the filter cover by pulling it towards you (it is secured with latches). The old filter is pulled out by moving up and on yourself. Be prepared for the fact that debris may spill out of it - it is better to lay it down with newspaper.
⚠️ Attention! On vehicles with more than 100,000 km, moisture may accumulate in the filter housing due to clogged drainage. If you find water there, clean the drainage hole (it is located under the filter, closer to the engine shield).
Step 4: Install a new filter
Before installing a new filter clean the case from dust and debris (you can use a vacuum cleaner). Make sure that the filter sealing rubber is not damaged. Install a filter arrow up (on most models the arrow indicates the direction of air flow).
Step 5. Assembly
Close the filter cover until it clicks, replace the decorative trim (the clips should click into place without effort) and connect the battery. After replacement, turn on the fan at maximum speed for 1-2 minutes to clear the system.
On Teana J32 After replacing the filter, you may need to reset the error C1140 through a diagnostic scanner or by disconnecting the battery for 10 minutes.
Typical mistakes when replacing the cabin filter
Even such a simple procedure can be performed incorrectly if you do not know the nuances. Here are the most common mistakes and their consequences:
1. Installing the filter upside down
If the direction of the arrow on the filter is reversed, the cleaning efficiency will decrease by 30–40%. Worse, on carbon filters this can lead to blowing coal dust into the cabin, which is harmful to health.
2. Ignoring case cleaning
If you do not remove debris from the housing before installing a new filter, it will quickly become clogged. In advanced cases this leads to heater fan overheating and its failure (replacement cost - from 15,000 rubles).
3. Damage to the clip pad
On Teana J32 The clips are plastic and break if removed carelessly. If this happens, replace the clips (part no. 90415-JM000) or use analogues from Toyota (90467-08018).
4. Buying a filter that is the wrong size
Some "universal" filters may not fit tightly to the housing, causing untreated air to pass by. Always check the article number!
5. Forget about drainage
If the drainage hole under the filter is clogged with leaves or dirt, moisture will accumulate in the housing, causing the appearance of mold and an unpleasant odor. Clean the drain with wire or compressed air.
Frequently asked questions about replacing the cabin filter with Nissan Teana
Is it possible to wash the cabin filter instead of replacing it?
No, it's ineffective. Carbon filters lose their properties after washing, and paper filters become deformed. The maximum that can be done is to blow out the filter with compressed air (but this is a temporary measure).
What happens if you drive without a cabin filter?
Dust, pollen and harmful gases will freely enter the cabin, which is harmful to health. In addition, over time, the heater radiator will become clogged and will have to be flushed (the cost of the service is from 5,000 rubles).
Which filter is better: original or analogue?
Original filters (27277-JM00B for coal) are guaranteed to be suitable in size and quality, but analogues from Mann or Bosch often they are not inferior, but are cheaper. The main thing is to avoid no-name brands.
Do I need to reset the error after replacing the filter?
On Teana J32 with the system Nissan Connect an error may appear C1140. It resets automatically after 2–3 ignition on/off cycles. If the error remains, use a diagnostic scanner (for example, Launch CReader).
Is it possible to replace the filter without removing the cover?
Technically yes, but it is extremely inconvenient. Without removing the cover, you will not be able to properly clean the case and risk damaging the clips. It's better to spend an extra 2 minutes on dismantling.
Video instructions for replacing the cabin filter
For clarity, we recommend watching the video (click to play):
Video
Replacing the cabin filter Nissan Teana J32 (2014 onwards):[There would be a YouTube video inserted here]
The video shows the process on Teana J32, but on J31 The algorithm is identical - only the color of the filter cover is different. Pay attention to how the author cleans the housing before installing a new filter - this is an important nuance!
Conclusion: is it worth changing the filter yourself?
Replacing the cabin filter with Nissan Teana - one of the simplest procedures that even a beginner can handle. You save 1,500–3,000 rubles (that’s what the services charge for the work) and you get confidence in the quality of the work done.
The main thing is not to forget about regularity: once a year or every 15,000 km. If you live in a large city or often drive on dusty roads, reduce the interval to 10,000 km. This will extend the life of the ventilation system and keep you and your passengers healthy.
If after replacement there are still questions or difficulties arise (for example, the error does not reset C1140), please contact FAQ block or leave a comment - we will quickly help you figure it out!