Replacing the cabin filter on a Nissan Murano Z52: detailed instructions with photos and videos

Cabin filter in Nissan Murano Z52 is not just a consumable, but a key element of comfort and safety. It protects the driver and passengers from dust, pollen, exhaust gases and even bacteria that enter the cabin through the ventilation system. Over time, the filter becomes clogged and its capacity decreases, which leads to deterioration in the performance of the stove, air conditioner and the appearance of unpleasant odors. If you notice that the air in the cabin has become less fresh and the flow from the deflectors has weakened, it’s time to think about replacement.

In this article we will look in detail at how to change the cabin filter yourself. Murano Z52 (2015–2022) without contacting the service. You will learn which filter to choose, where it is located, what tools you will need, and how to avoid common mistakes. The instructions are suitable for all modifications, including versions with dual-zone climate control And air purification system. We will also give tips on how to care for your ventilation system so that the filter lasts longer.

Where is the cabin air filter located in the Nissan Murano Z52?

B Murano Z52 The cabin filter is located behind the glove compartment on the passenger side. This is a typical location for most crossovers Nissan, but access to it may vary depending on the configuration. In basic versions, the filter is hidden behind a plastic cover, and in top versions (for example, with air purification system) it may be necessary to remove additional elements.

To get to the filter you need:

• 🔧 Open the glove compartment and empty it of its contents.
• 🔍 Press the latches on the sides of the glove compartment and lower it down (it is not completely removed, but only reclines).
• 📍 Behind the glove compartment you will see a plastic cover with the inscription CABIN AIR FILTER or just with arrows.

In some versions Murano Z52 (for example, with Premium package) the filter can be installed in two copies - the main one and the additional carbon one. This is important to consider when purchasing a new filter.

Which cabin filter to choose for Murano Z52?

There are many options for cabin filters on the market. Nissan Murano Z52, but not all of them are equally effective. Main types:

• 🌿 Paper (dust) - the cheapest, they only retain large dust and pollen. Suitable for regions with clean air.
• ⚫ Coal - absorb harmful gases and unpleasant odors. The best choice for the city.
• 🦠 Antibacterial - impregnated against microbes and fungi. Relevant for humid climates.
• 🔥 HEPA filters - retain up to 99% of small particles, but require frequent replacement.

Original filter from Nissan has an article number 27277-4M000 (dust) or 27277-4M001 (coal). However, many owners choose analogues from trusted brands:

Brand	Article	Type	Average price, ₽
Mann-Filter	CU 29003	Coal	1 200–1 500
Bosch	1 987 429 660	Dusty	800–1 000
Filtron	K 1354	Antibacterial	1 400–1 700
Denso	DCF35-8P	Coal	1 300–1 600

Important! When purchasing, check whether the filter is suitable for your modification Murano Z52. For example, for versions with climate control a filter with an additional gasket may be required.

⚠️ Attention: Do not buy filters without packaging or with damaged sealing film. They could absorb moisture and dust in the warehouse, reducing their effectiveness.

Tools and materials for replacement

To replace the cabin filter with Nissan Murano Z52 no special tools needed. What you have at hand is enough:

• 🔧 A screwdriver with a flat blade (for removing the glove box latches).
• 🧴 Wet wipes or rag (for cleaning the case).
• 🕯️ Flashlight (to better see the fastenings).
• 🚮 Vacuum cleaner with a narrow nozzle (optional, for cleaning air ducts).

If you are planning complete cleaning of the ventilation system, additionally prepare:

• 🧪 Air conditioner cleaner (for example, Liqui Moly Klima-Anlagen-Reiniger).
• 💨 A can of compressed air (for blowing air ducts).

B Nissan Murano Z52 with the system Plasma Cluster (air ionizer) after replacing the filter, you may need to reset the error in the climate control unit. To do this, press and hold the button A/C within 10 seconds.

Step-by-step instructions for replacing the cabin filter

The replacement process will take no more than 15–20 minutes if you follow the instructions. The main thing is to take your time and handle the plastic clips carefully.

Step 1. Removing the glove compartment

Open the glove compartment and remove all items from it. There are plastic latches on both sides of the glove compartment - press them at the same time and lower the glove compartment down. It is not completely removable, but only folds back, allowing access to the filter cover.

Step 2: Removing the filter cover

The filter cover is secured with two latches. Gently pull it towards you, starting from the top. If the latches are tight, you can pry the cover off with a flat-head screwdriver, but without excessive force, so as not to break it.

Step 3: Removing the old filter

The old filter is pulled out downward. Be prepared for the fact that it may be very dirty - it is better to immediately put it in a bag so as not to spread dust around the cabin.

Step 4: Install a new filter

Before installation, check the direction of the arrows on the filter - they should point down (in the direction of air movement). Insert the filter all the way, then close the lid and return the glove compartment to its place.

What should I do if the filter doesn't fit?

If the new filter does not fit, check that it is oriented correctly. Sometimes manufacturers indicate the direction of the arrows incorrectly - in this case, try turning the filter over. Also make sure there is no debris or old filter residue in the grooves.

Step 5. Checking the system operation

After replacement, turn on the ventilation at maximum speed and check if any extraneous noise appears. If the air is blowing weakly, the filter may not be installed correctly or the air ducts may be clogged.

⚠️ Attention: If, after replacing the filter, a burning smell appears in the cabin, immediately turn off the ventilation and check to see if any foreign objects (for example, leaves or plastic debris) have entered the air ducts.

Common replacement mistakes and how to avoid them

Even such a simple procedure as replacing the cabin filter may not go according to plan if some nuances are not taken into account. Here are the most common mistakes:

• 🔄 Filter orientation is incorrect. The arrows on the filter should point down, not up. If you mix it up, the filter will trap dust worse, and the air will bypass.
• 🧹 Ignoring case cleaning. Dust and debris in the filter housing can quickly clog the new filter. Always wipe the inside with a damp cloth.
• 🔧 Powerful removal of the glove compartment. The glove compartment latches are plastic and break easily. If you can’t remove it, check if all the latches are released.
• 🚫 Buying a non-original filter without checking. Cheap filters may not fit properly or may have poor quality materials.

Another typical problem is forget about the second filter (if there is one). In some trim levels Murano Z52 two filters are installed: main and additional (carbon). If you replace only one, the air purification efficiency will be low.

How often should you change the cabin filter?

The manufacturer recommends changing the cabin filter at Nissan Murano Z52 every 15,000 km or once a year. However, this period may vary depending on operating conditions:

• 🏙️ City driving. In megacities with high levels of pollution, the filter clogs faster - every 10,000 km.
• 🌳 Country trips on dirt roads. Dust and sand reduce the filter life to 8,000–10,000 km.
• 🌧️ Humid climate. In damp weather, the filter may become moldy - it needs to be changed more often or use antibacterial options.

You can understand that the filter requires replacement by the following signs:

• 💨 Weak air flow from the deflectors when the ventilation is turned on.
• 👃 The appearance of an unpleasant odor in the cabin (especially when the air conditioner is turned on).
• 🌫️ Fogging of glass even in dry weather.

If you often drive on dusty roads or live in an industrial area, it makes sense to check the condition of the filter every 5,000–7,000 km. To do this, you don’t need to remove it - just turn on the ventilation at maximum speed and listen: if you hear a whistle or the air flows with difficulty, it’s time to change the filter.

Additional tips for caring for your ventilation system

To help your cabin filter last longer and keep your cabin air fresh, follow these recommendations:

• 🚗 Ventilate the interior. After driving, open all doors for 1-2 minutes to allow moisture and odors to escape.
• 🍃 Use fragrances with an antibacterial effect. They will help prevent bacteria from growing in your air ducts.
• 🔄 Turn on the air conditioner for 5-10 minutes once a week, even in winter. This will prevent moisture from stagnating in the system.
• 🧼 Clean the deflectors. Dust on them can get into the cabin, even if the filter is new.

If a persistent smell of mold appears in the cabin, this is a signal that moisture has accumulated in the ventilation system. In this case it will help air conditioner disinfection:

1. Buy a special product (for example, Step Up or Liqui Moly).
2. Turn on the air recirculation and spray the product into the air intake (usually located near the windshield).
3. Wait 10–15 minutes, then ventilate the interior.

For Nissan Murano Z52 with the system Plasma Cluster It is recommended to carry out once every six months cleaning the ionizer. To do this you need:

1. Turn off the ignition.
2. Press and hold the button Plasma within 5 seconds.
3. Wait for the sound signal - the system will perform self-cleaning.

FAQ: Frequently asked questions

Is it possible to drive without a cabin filter?

Technically yes, but it is highly discouraged. Without a filter, dust, soot, pollen and even small insects will enter the cabin. In addition, dirt will settle on the air conditioner evaporator radiator, which will lead to its corrosion and unpleasant odor. In the long term, this can damage the furnace fan.

Which filter is better - carbon or regular?

A carbon filter does a better job of removing odors and harmful gases, but is more expensive and clogs faster. A regular paper filter is cheaper and lasts longer, but does not protect against exhaust gases. The choice depends on the operating conditions: coal is better for the city, paper is better for country trips.

Do I need to reset errors after replacing the filter?

In most cases no. However, in Murano Z52 with the system Plasma Cluster or automatic climate control The system check light may come on. To reset it, press and hold the button AUTO within 10 seconds.

Is it possible to clean the old filter instead of replacing it?

Theoretically, you can vacuum or wash the filter, but this is a temporary solution. After cleaning, it will lose up to 50% of its effectiveness, since the pores become clogged with fine dust, which cannot be completely removed. It’s better to spend money on a new filter - it’s cheaper than repairing the ventilation system.

Why does the stove blow weaker after replacing the filter?

This can be caused by several reasons:

• The filter is installed incorrectly (upside down or not fully inserted).
• A lot of dust has accumulated in the air ducts; they need to be blown out with compressed air.
• The heater radiator or air conditioner evaporator is clogged (flushing is required).

Check the filter installation and, if necessary, contact a service to diagnose the heating system.