Nissan Primera P12 - the legendary sedan and hatchback, Released in 2002 and remaining on the assembly line until 2008. Despite their advanced age, these cars are still in demand due to their reliability, comfort and availability of spare parts. However, over time, even the highest quality seats wear out: the filler sags, the upholstery cracks, the adjustment mechanisms break. In this article we will look at everything you need to know about seats. Primera P12 - from the selection of original parts to complete replacement and tuning.

The material will be useful both to owners of basic versions with fabric upholstery, and to those who want to upgrade the interior to the level Tekna or Sport with leather chairs. We have collected current articles, compared analogues from other models Nissan, and prepared step-by-step instructions with nuances that are not written about in standard manuals. We will pay special attention to typical problems - for example, why the driver's seat creaks or how to eliminate sagging in the backrest.

Original seats Nissan Primera P12: articles and configurations

Seats for Primera P12 vary depending on the year of manufacture, body type (sedan W12 or hatchback H12) and trim level. Original parts supplied from the factory Nissan in Japan and the UK, but today they can be found both new (remnants of warehouses) and used in good condition. Below is a table with the main articles for the front seats:

Position Article Description Applicability
Driver's seat 64010-4M000 Basic version with manual adjustments, fabric upholstery 2002-2005, all markets
Driver's seat 64010-4M010 Electric drive (6 directions), leather upholstery 2005-2008, versions Tekna/Sport
Passenger seat 64020-4M000 Manual adjustments, fabric All years, basic configurations
Back seat 64100-4M000 Solid cast, fabric upholstery, not heated Sedan and hatchback
Back seat 64100-4M010 60/40 split, leather upholstery 2006-2008, versions Tekna

It is important to consider that the seats are for left-hand drive and right-hand drive versions Primera P12 not interchangeable without modifications. For example, the driver's seat is from the Japanese version (JDM) will not fit a European car due to different seat belt attachment points and the location of the gearshift lever. The heating mounts (if provided) also differ: versions for cold climates use more powerful heating elements.

When buying used seats, pay attention to the condition frame — the guide rails often rust, and the plastic elements of the adjustment mechanisms break over time. Check the operation of all functions: backrest tilt, longitudinal movement, and if the seat is electric, test all the motors. On versions with side support (Sport Package) the springs in the sidewalls often wear out - this leads to loss of shape and discomfort during sharp turns.

📊 What seats are in your Primera P12?
  • Original fabric
  • Original leather
  • Aftermarket (tuning)
  • I don't know
  • Others

Analogues and interchangeability: what is suitable from other models Nissan

Original seats for Primera P12 These days they are not easy to find, especially in good condition. Fortunately, there are several models Nissan, from which analogues with minimal or no modifications are suitable:

  • 🔧 Nissan Almera N16 (2000-2006) - the front seats are interchangeable in terms of fastenings, but differ in the shape of the backrest (less pronounced lateral support). Suitable article numbers 64010-BM000 (driver's license) and 64020-BM000 (passenger).
  • 🔧 Nissan Sentra B16 (2004-2006) - identical mounts, but the seats are 2-3 cm narrower. The guides may need to be modified.
  • 🔧 Nissan Bluebird Sylphy G10 (2005-2012) - only rear seats fit (64100-4N000), the front ones differ in height.
  • 🚫 Not suitable seats from Nissan Teana J31 or Maxima A33 — despite the external similarity, the fastenings and geometry of the frame are different.

When installing analogs, pay attention to:

  1. The location of the seat belt fastenings - on some models they are offset by 10-15 mm, which can lead to improper operation of the belt.
  2. Length of heating and electric wiring - if the seat is shorter or narrower, the wires may not reach the connectors.
  3. Seating height - for example, seats from Almera N16 20mm lower, which may be uncomfortable for tall drivers.
⚠️ Attention: When replacing the front seats with analogues from other models, be sure to check compatibility with airbags. On some versions Primera P12 Passenger weight sensors are integrated into the seat - if they do not match, the system SRS may give an error.

Common seat problems Primera P12 and ways to eliminate them

Even with careful use of the seat Primera P12 Over time they require repairs. Here are the most common problems and their solutions:

  • 🔊 Creak when moving - usually caused by wear of the plastic bushings in the longitudinal adjustment mechanism. Solution: remove the seat, clean the guides from dirt and lubricate them silicone grease (do not use WD-40!). If the bushings are damaged, replace them with new ones (64035-4M000).
  • 🪑 Back sagging - occurs due to stretching of the cables or breakage of the tilt lock. To repair, you will need to disassemble the backrest and replace the cables (64050-4M000) or the entire adjustment mechanism.
  • ⚡ The electric drive does not work — most often the culprit is oxidized contacts in the control unit under the seat. Check the fuse F37 (15A) in the mounting block and connectors on the motors.
  • 🔥 Heating does not warm up - in 80% of cases the problem is a burnt-out heating element. For diagnostics, measure the resistance between the heating contacts (should be ~1-2 Ohms). Replacement of the element is possible without removing the upholstery.

If the seat has sagged and lost its shape, you can restore it without completely replacing it. To do this:

  1. Remove the upholstery by carefully prying the staples around the perimeter.
  2. Check the condition of the foam filling - if it crumbles, replace it with a new one (foam rubber with a density of 35-40 kg/m³ is suitable).
  3. Increase lateral support by adding layers of synthetic padding or special polyurethane foam inserts.
  4. When assembling, use a furniture stapler to secure the fabric - the original staples often break during dismantling.

☑️ Diagnosis of seat faults

Done: 0 / 5

Pay special attention fastening rails - They often rust due to moisture. If the rails are jammed, do not try to force the seat to move as this may cause the rails to become deformed. It is better to treat them with a penetrating lubricant (for example, Liqui Moly Rostloser) and let sit for several hours.

Replacing seats Primera P12: step-by-step instructions with nuances

Removing and installing seats on Primera P12 does not require special tools, but there are a few points that will simplify the process. You will need:

  • 🔧 14 mm socket wrench (for rail fastenings).
  • 🔧 Screwdriver with a flat blade (for plastic plugs).
  • 🔧 Multimeter (if you are checking electrical wiring).
  • 🔧 Silicone grease (for guides).

Sequence of actions:

  1. Disconnect the negative terminal of the battery (required if the seat is powered or heated!).
  2. Move the seat all the way forward to access the rear mountings.
  3. Use a screwdriver to pry off the plastic plugs on the rails (there are 4 of them - 2 in front and 2 in back).
  4. Unscrew the fastening nuts with a socket wrench. Nuance: On heated versions there is an additional connector under the rear of the seat - do not forget to disconnect it!
  5. Gently slide the seat back and lift it up to remove it from the rails.

When installing a new seat:

  • Check the compatibility of the heating connectors and the electric drive (the color markings must match).
  • Do not tighten the fastening nuts all the way at once - first align the seat with the guides.
  • If you are installing a seat with side airbags, make sure that the connector yellow connected to the corresponding port in the cabin.
⚠️ Attention: On versions with seat position memory (optional Memory Package) After replacement, a factory reset will be required. To do this, turn on the ignition, press and hold the button SET on the seat control unit for 10 seconds until a signal sounds.
How to remove seat upholstery without damage?

To remove upholstery carefully, use a plastic puller (for example, for car moldings). Start at the bottom of the back, where the staples are less visible. Pull the fabric a little at a time so as not to tear it. Pay attention to the places where the heating is attached - the wires are often sewn to the upholstery and can come off.

Seat tuning: from reupholstering to complete replacement with sports ones

Updating your seats is one of the most noticeable ways to transform your interior. Primera P12. There are many tuning options: from cosmetic reupholstery to installation of carbon seats made of Nissan GT-R. Let's consider the main directions:

1. Upholstery reupholstery

The most budget-friendly way to freshen up your seats is to change the upholstery. Popular materials:

  • 🧵 Alcantara - practical, wear-resistant, but requires regular cleaning. Suitable for sporty style.
  • 🐄 Genuine leather - a premium option, but expensive to maintain (special conditioners are needed).
  • 🧴 Eco leather - a compromise in price and quality, resistant to abrasion.
  • 🎨 Individual embroidery — you can order a logo Nissan or personal design.

The cost of reupholstery in the studio is from 15,000 rubles for a pair of front seats. If you want to save money, you can buy ready-made covers from Covercraft or Katzkin, but they rarely fit perfectly.

2. Installation of sports seats

For lovers of dynamic driving, seats with enhanced lateral support are suitable. Popular options:

  • 🏁 Sparco Sprint - budget weight seats (from 20,000 rubles), but without backrest tilt adjustment.
  • 🏎️ Recaro SRD — universal, with adjustments like the original ones, but more expensive (from 50,000 rubles).
  • 🔥 Nismo (from Nissan) - original sports seats from 350Z or GT-R, but require modification of the fastenings.

When installing sports seats, consider:

  • Seating height – low seats can impair visibility for short drivers.
  • Seat Belt Compatible - Some models require a 4-point harness.
  • Availability of certification - in Russia, seats must comply GOST R 41.16-2005 (analogue ECE R16).

3. Modernization of the frame

If the original frame is intact, but you want to improve the ergonomics, you can:

  • Add lumbar support (for example, from Tempur) - cost from 3,000 rubles.
  • Install adjustable headrests (article 64200-4M000).
  • Strengthen the sides carbon inserts (suitable for versions Sport).
💡

Before buying sports seats, check if they have a certificate ECE R16. Without it, you may not be allowed to undergo a technical inspection, and in the event of an accident, the insurance company may refuse to pay.

Heated seats: repair, replacement and installation from scratch

Heated seats on Primera P12 installed only in top trim levels (Tekna, Sport), but it can be modified for any version. Let's consider all the options:

1. Repair of standard heating

If the heating stops working, first check:

  • 🔌 fuse — F20 (20A) in the mounting block.
  • 🔧 Relay — located behind the glove compartment, article number 25230-4M000.
  • 📡 Temperature sensor — built into the seat; if there is a malfunction, the heating turns off automatically.

If the problem is with the heating element, it can be replaced separately. Original article - 64060-4M000 (for the driver's seat), but analogues from Webasto or Hella. The average cost is 2,500 rubles. per element.

2. Installation of heating on the version without it

For this you will need:

  • A set of heating elements (for example, Webasto Thermo Top E).
  • Control unit with a button (can be taken from Nissan Almera N16, article 25540-4M000).
  • Wires with a cross-section of 1.5 mm² and heat-shrinkable tubes.

Installation sequence:

  1. Remove the seat upholstery and place the heating elements on the foam rubber (no closer than 20 mm to the edges!).
  2. Connect the elements in parallel, observing polarity.
  3. Extend the wires to the control unit (the optimal place is under the glove compartment).
  4. Connect to power via fuse (use +12V from the cigarette lighter or directly from the battery with a relay).
⚠️ Attention: Do not connect heating elements directly to the permanent positive - this may lead to overheating and fire. Be sure to use a thermal relay or a standard control unit with a timer!

3. Alternative solutions

If you don't want to deal with wiring, consider:

  • 🔥 Heated capes (from 1,500 rubles) - connect to the cigarette lighter, but are less reliable.
  • 🪑 Integrated heated seats (for example, from Subaru Impreza) - interchangeable for fastenings.
💡

When installing heating yourself, be sure to use thermostat or standard control unit. Heating elements without temperature control can overheat up to 120°C, which will lead to foam melting or fire.

Where to buy seats for Nissan Primera P12: verified sources

The choice of where to buy depends on your budget and quality requirements. Here are the tested options:

1. New original seats

Official dealers Nissan no longer supply spare parts for Primera P12, but new details can be found:

  • 🌍 Nissan Classic Parts (European catalog) - remnants of warehouses, prices from 40,000 rubles. behind the front seat.
  • 🇯🇵 Japanese auctions (For example, Jess or TCV) — seats are in perfect condition, but delivery is expensive.

2. Used seats

The best option in terms of price/quality ratio. Where to look:

  • 🛒 Avito/Drom — average price of a front seat in good condition: 5,000–12,000 rubles.
  • 🚗 Showdown - for example, Exist.ru or Bamper.by. Before purchasing, request photos of fasteners and mechanisms!
  • 🇪🇺 European showdowns (For example, 247Spares) - cheaper than in Russia, but a compatibility check is needed.

3. Analogues and replicas

If the original cannot be found, pay attention to:

  • 🪑 TDR (Taiwan) - copies of the original seats, suitable for fastenings, price from 18,000 rubles.
  • 🏁 Sparco/Recaro — Sports seats, but the fastenings require modification.

When purchasing used seats, be sure to check:

  • Year of manufacture and market (European, Japanese or American versions).
  • Availability airbag - if your car has them, but the seats you buy do not, you will have to turn off the system SRS.
  • Condition guide rails - rust or play will make installation impossible.

FAQ: Frequently asked questions about seats Nissan Primera P12

Is it possible to install seats from Nissan Teana J31 on Primera P12?

No, despite the external similarity, the fastenings and frame geometry are different. Seats from Teana wider and higher, and the seat belt anchor points are not aligned. The only option is to completely redo the fastenings, which is unsafe.

How to fix a squeak in the driver's seat?

The creaking noise is most often caused by wear of the plastic bushings in the longitudinal adjustment mechanism. Solution:

  1. Remove the seat and clean the dirt from the guides.
  2. Apply silicone grease (not WD-40!) onto the rails and bushings.
  3. If the bushings are destroyed, replace them with new ones (part number 64035-4M000).

Also check the fastening of the backrest - sometimes the squeaking comes from loose bolts.

Which seats are suitable from other brands?

With minimal modifications, front seats from:

  • Nissan Almera N16 (2000-2006) - complete interchangeability of fasteners.
  • Renault Megane II (2002-2008) - differ in the shape of the back, but the fastenings are the same.
  • SsangYong Actyon (2005-2011) - rear seat only, front seats do not fit.

Important: check compatibility with airbags and sensors SRS!

How to repair a power seat?

If the electric drive does not work:

  1. Check the fuse F37 (15A) in the mounting block.
  2. Inspect the connectors under the seat - the contacts often oxidize.
  3. Test the motors with a multimeter (resistance should be 2-5 ohms).
  4. If the motor burns out, replace it (part number 64070-4M000 for longitudinal adjustment).

On versions with position memory (Memory Package) it may be necessary to reset errors via the diagnostic connector.

Should you install sports seats in your everyday car?

Sports seats (eg Sparco or Recaro) have pros and cons:

  • ✅ Better lateral support when cornering.
  • ✅ More aggressive interior design.
  • ❌ Less comfortable for long trips (hard landing).
  • ❌ Visibility may deteriorate due to high sides.

The best option for everyday use is hybrid seats (eg Recaro SRD) that combine sporty design with comfort adjustments.