<em>Nissan Qashqai J10</em>seats (2007–2013): how to choose, replace and upgrade

Nissan Qashqai J10 The first generation (2007–2013) remains a popular crossover, but over time, even the most reliable parts wear out - especially the seats. Owners are faced with sagging upholstery, breakdown of adjustment mechanisms, or a desire to update the interior. In this article we will look at everything about seats Qashqai J10: from original articles to tuning and repair options.

We analyzed data from spare parts catalogues, reviews from owners and recommendations from service centers to collect up-to-date information. Here you will find not only technical details, but also practical advice - for example, how to save on replacement or what materials to choose for reupholstery. And if you are planning an upgrade, we will tell you which seats are from other models Nissan will fit without modifications.

Original seats Nissan Qashqai J10: articles and features

Original seats for Qashqai J10 vary depending on the configuration, type of upholstery and the presence of heating. Main articles of the front seats:

• 🔧 Driver's seat (fabric, no heating): 29200-4M00A or 29200-4M00B (depending on the year of manufacture).
• 🔥 Driver's seat (leather/alcantara, heated): 29200-4M01A or 29200-4M01B.
• 🪑 Passenger seat (fabric): 29210-4M00A.
• ⚡ Passenger seat (leather, electric): 29210-4M01A.

The rear seats come as a single unit (article number 29300-4M00A for fabric and 29300-4M01A for leather) and rarely fail, but their upholstery is often damaged by children or pets. Please note: seats for models with ramp for disabled people (optional S90) have unique fastenings and are not interchangeable with standard ones.

An important nuance: on the restyled versions (2010–2013), the shape of the headrests and fastenings has changed ISOFIX. Dorestayla seats (2007–2009) and after (2010–2013) are similar in appearance, but may not match in terms of electrical wiring connectors (for example, for heating).

Compatible with other models Nissan: what will fit without modifications

If the original seats are too expensive (the price of new ones reaches 40–60 thousand rubles per set), you can consider analogues from other models Nissan. The following options have full compatibility in terms of fastenings and electrical components:

Donor model	Seat articles	Notes
Nissan X-Trail T31 (2007–2013)	29200-4N00A (driver), 29210-4N00A (passenger)	Fully compatible, but headrests may vary. The heating electrics are identical.
Nissan Rogue (USA, 2007–2013)	29200-4S00A	Only for versions with manual adjustment. Fastenings ISOFIX match.
Nissan Dualis (Japan/Australia)	29200-JM00A	Analogue Qashqai, but with a different location of the lumbar support adjustment button.

With seats from Nissan Juke or Note There is no point in experimenting - different dimensions and fastenings. And here is the back sofa from X-Trail T31 100% suitable, but will have to be repainted as the color schemes are different.

⚠️ Attention: When installing seats from Rogue or Dualis check the airbag connector (airbag). In some versions it is mirrored, and the contacts will need to be resoldered.

Seat tuning: from reupholstery to sports options

Update the interior Qashqai J10 possible without buying new seats. Popular tuning options:

• 🧵 Padding: leather or Alcantara upholstery (price from 15 thousand rubles. per set). The best materials - genuine leather (thickness 1.2–1.4 mm) or Alcantara (for sporty style).
• 🔥 Heating: can be installed on any seats (the kit will cost 8–12 thousand rubles.). The best option is heating elements Webasto or Hella.
• 🏎️ Sports seats: from Recaro or Sparco (require modification of fastenings). Models with universal slides are suitable (ISO 11161).
• 🎨 Painting plastic: seat side panels can be painted in body color (technology soft-touch).

Often used for constriction combined materials: leather + Alcantara (for example, the back is made of leather and the sides are made of Alcantara for better lateral support). Important: when choosing a color, keep in mind that dark shades (black, gray) are less easily soiled, but heat up more strongly in summer.

How to check the quality of the banner?

A high-quality reupholstery should:

1. Have even seams without distortions (check diagonally).

2. Avoid squeaking when moving (use anti-squeak pads).

3. Maintain factory holes for airbags and seat belts.

If a craftsman suggests gluing fabric to old upholstery, refuse: this will shorten the service life by 2-3 times.

To install sports seats you will need:

1. Remove the old seats (unscrew the 4 bolts securing the slide).
2. Install adapters for mounts ISO 11161 → Nissan (worth ~3 thousand rubles.).
3. Connect the electrics (if the seats are heated or electric).

⚠️ Attention: When replacing with sports seats without airbags (airbag) you will have to turn off the passenger presence sensor in the block SRS. This may cause an error on the dashboard (Airbag Fault).

Seat repair Qashqai J10: typical breakdowns and how to fix them

Most often the owners Qashqai J10 face the following problems:

• 🔩 Damage to the height adjustment mechanism (characteristic creaking or seat dip). The reason is wear of the rack or spring. Solution: replacing the mechanism (article no. 29220-4M00A, price ~2.5 thousand rub.).
• 🔥 Heating does not work. In 80% of cases, a burnt-out heating element is to blame (part number 29500-4M00A). Less commonly, there is a break in the wiring under the seat.
• 🪑 Sagging upholstery on the sides. It can be eliminated by re-upholstering or installing additional foam inserts.
• ⚡ The electric drive does not respond to buttons. Check the fuse F37 (10A) in the block under the steering wheel and relay K20.

To repair the height adjustment mechanism you will need:

TORX T30 Screwdriver|10mm Wrench|Pliers|Grease LIQUI MOLY LM 50-->

Step-by-step instructions for replacing the heating element:

1. Disconnect the negative terminal of the battery.
2. Remove the seat (4 bolts under the head TORX T50).
3. Carefully peel back the upholstery from the bottom of the seat (use a plastic putty knife).
4. Unsolder the old element and install the new one, securing it with hot glue.

How to remove and install seats: step-by-step instructions with photos

For removing the front seats Qashqai J10 will be required 15–20 minutes and a minimum set of tools. The main thing is to remember to disconnect the battery to avoid triggering the airbag (airbag).

Procedure:

1. Pull the seat back as far as possible to gain access to the front bolts.
2. Unscrew the 2 bolts at the front (head TORX T50).
3. Move the seat forward and remove the 2 rear bolts.
4. Disconnect the electrical wiring connectors (under the seat and on the side).

When installing new seats, pay attention to:

• 🔌 Correct connection of the airbag connector (yellow color).
• 🔧 Tightening the bolts with torque 40–50 Nm (Tightening may deform the slide).
• 📏 Matching guides for length adjustment.

The rear seats are easier to remove:

1. Lift the front of the sofa up (it is secured with latches).
2. Unscrew the 2 bolts securing it to the body (under the plastic plugs).
3. Disconnect the seat belts (if you are planning a complete replacement).

Where to buy seats for Qashqai J10: new, used and replicas

Seat prices for Qashqai J10 vary greatly depending on condition and origin:

Seat type	Where to buy	Cost (set)	Pros/Cons
New original	Official dealers, Nissan Parts	40–60 thousand rubles.	✅ Guaranteed, 100% compatibility ❌ Expensive, long delivery
Used original	Avito, Drom.ru, showdown	8–20 thousand rubles.	✅ Cheaper than new ones ❌ Risk of hidden defects (sagging, non-working heating)
Replicas (China)	AliExpress, Taobao	15–25 thousand rubles.	✅ Low price, choice of colors ❌ Low quality materials, fastenings may not match
Aftermarket (tuning)	Recaro, Sparco, local studio	30–100 thousand rubles.	✅ Improved ergonomics ❌ Requires improvements on fastening

When purchasing used seats, be sure to check:

• 🔧 Efficiency of all mechanisms (height adjustment, backrest tilt).
• 🔥 Is heating working (check with a multimeter, the resistance of the heating element should be 1–3 ohms).
• 🪑 Condition of the spring unit (press on the seat - if it sinks, the springs are worn out).

On AliExpress They often sell "original" seats at a suspiciously low price. As a rule, these are replicas with a simplified design. You can distinguish them by:

• No logo Nissan on plastic parts.
• Thinner upholstery (original - 4–5 mm, replica - 2–3 mm).
• Uneven seams or mismatched fabric shades.

Frequently asked questions about seats Nissan Qashqai J10

Is it possible to install seats from Qashqai J11 on J10?

No, fastenings and electrics are not compatible. Seats J11 wider by 30 mm and have a different airbag connector. The exception is the back sofa, but it will have to be trimmed on the sides.

How to eliminate squeaking of seats when driving?

The creaking occurs due to friction of the plastic guides or wear of the bushings of the adjustment mechanism. Solution:

1. Lubricate the guides with silicone grease (WD-40 Specialist).
2. If the squeak remains, disassemble the mechanism and replace the bushings (part number 29230-4M00A).

What to do if the light comes on after replacing the seats Airbag?

The error occurs due to:

• Unconnected airbag connector (yellow connector under the seat).
• Damaged wiring (check the circuit with a multimeter).
• Incompatible seat (for example, without a passenger presence sensor).

Use a scanner to reset the error ELM327 or disconnect the battery at 10 minutes.

Which seats are best for long trips?

For comfort on long-distance trips, the following are optimal:

• Original leather with heating and lumbar support.
• Sports Recaro SRD (good lateral support, but tough for the city).
• Covered with memory foam (remember the shape of the body).

Avoid too soft seats - they cause back fatigue over distances 300 km.

Is it possible to reupholster the seats yourself without experience?

Yes, but you will need:

1. Buy an upholstery set with patterns (for example, on Avito or in the studio).
2. Use furniture stapler and glue 88-N for fixation.
3. Remove the seats and practice on the back sofa (it's easier to reupholster).

The most difficult thing is to tighten the sides - you need to be careful there so that there are no wrinkles. If in doubt, order a service from the studio (price from 10 thousand rubles. per set).