Wiper blades on Nissan Almera G15 - it would seem a trifle, but not only comfort, but also driving safety depends on their condition. Worn wipers leave streaks, do not clear the glass well from rain or snow, and in a critical situation may stop working altogether. In this article we will look at everything that owners need to know. Almera G15 (2012–2019) about the selection, size and replacement of windshield wiper blades - without water and general phrases.

We analyzed owner reviews, technical data and tests of popular brands to collect up-to-date information. Here you will find exact brush sizes for front and rear windows, comparison of frameless and framed models, as well as step-by-step instructions for replacement, taking into account the features of mounting on Almera G15. We will pay special attention to typical mistakes that reduce the service life of new brushes by 2-3 times.

Original sizes of wiper blades for Almera G15

On Nissan Almera G15 Brushes of different sizes are installed for the driver and passenger sides. This is important to consider when purchasing, since a discrepancy of even 2–3 cm impairs glass cleaning. Official sizes:

  • 🚗 Driver's side (left): 600 mm (24 in)
  • 🚙 Passenger side (right): 400 mm (16 inches)
  • 🔄 Rear wiper (if equipped): 300–330 mm (depending on configuration)

Important: on restyled models Almera G15 (after 2016) sometimes there are brushes with a length of 580 mm instead of 600 mm on the driver's side. This is due to a change in parts supplier. In order not to make a mistake, measure old brushes before purchasing or check the markings on the plastic base.

📊 What brushes are on your Almera G15?
  • Original Nissan
  • Bosch
  • Denso
  • Other brands
  • I don't know
Position Size(mm) Original article number Analogues
Driver's license 600 28560-BM40A Bosch 3397004632, Denso WI-60L
Passenger 400 28561-BM40A Bosch 3397004625, Valeo 600006
Rear (optional) 300–330 28580-BM40A HELLA 8WG 350 001-801

⚠️ Attention: On some versions Almera G15 brushes with fastening were installed for Asian markets Hook (U-shaped hook), while European models were equipped with a mount Pinch Tab. Before purchasing, check the type of fastening on your brushes!

Frameless vs frame brushes: which is better for Almera G15

The choice between frameless and frame brushes depends on climatic conditions and driving style. Frame brushes are cheaper, but less durable in cold weather, while frameless brushes adhere better to the glass and last longer. Let's look at the pros and cons of each type:

  • ✅ Frameless brushes:
    • 🌨️ Work better when heavy snow and ice (do not freeze)
    • 🚗 Quieter at high speeds (no vibration)
    • 🔧 Easier to install (one universal adapter)
  • ❌ Frame brushes:
    • 💰 30–50% cheaper
    • 🔄 Easier to find in stores (wide range)
    • ⚠️ They wear out faster when frequent pressure washing

For Almera G15 the best choice would be frameless brushes from Bosch Aerotwin or Denso Flat Blade. They cope better with rain at a speed of 100+ km/h and leave no streaks. Frame brushes should only be considered as a temporary option or for regions with mild climates.

💡

If you often drive on the highway, choose brushes with airfoil (eg Bosch Aerotwin AR620S). They reduce lift at high speeds and prevent the blade from “lifting” from the glass.

Top 5 windshield wiper blades for Almera G15: rating 2026

Based on tests and owner reviews Nissan Almera G15 We have compiled a ranking of the best windshield wiper blades. The selection criteria were: cleaning quality, durability, noise level and compatibility with vehicle mounts.

  1. Bosch Aerotwin AR620S (600/400 mm)

    Frameless brushes with graphite coating for quiet operation. Suitable for all seasons, including frosts down to -30°C. Average service life: 1.5–2 years.

  2. Denso Flat Blade WI-60L/WI-40R

    Japanese quality with reinforced rubber profile. Excellent for removing ice and snow. Fastening Pinch Tab perfect for Almera G15.

  3. Valeo Silencio X-TRM (600/400 mm)

    Premium segment with Teflon coated to reduce friction. 3 year warranty, but the price is 40% higher than Bosch.

  4. HELLA EcoWind (580/380 mm)

    A budget option with a good price/quality ratio. Suitable for restyled models with shortened brushes.

  5. Nissan Original (28560-BM40A / 28561-BM40A)

    Original brushes from the dealer. The quality is at the Bosch level, but the price is 1.5–2 times higher. Suitable for those who appreciate 100% compatibility.

⚠️ Attention: Cheap brushes without a brand (for example, “noname” from online stores) often have incorrect rubber hardness. This results in them either not cleaning the glass in light rain or scratching it when pressed hard.

💡

For Almera G15 the best choice is frameless brushes Bosch Aerotwin or Denso Flat Blade. They provide a better fit to the glass and last 2 times longer than their frame counterparts.

Step-by-step instructions for replacing brushes on Almera G15

Replacing windshield wiper blades with Nissan Almera G15 takes no more than 10 minutes and requires no tools. The main thing is to remove the old brushes correctly without damaging the mount. Follow the instructions:

☑️ What you will need to replace

Done: 0 / 4
  1. Raise the wiper to the vertical position

    Turn on the ignition, then turn it off when the brushes are in the up position. Carefully lift the wiper by hand until it stops (do not force it!).

  2. Remove the old brush

    Click on fastening clamp (usually a plastic latch on the side) and pull the brush down. If the mount Hook, simply move the brush to the side.

    ⚠️ Attention: Do not pull on the rubber part - this may damage the metal frame!

  3. Install a new brush

    Align the new blade mount with the wiper arm. For Pinch Tab press the latch until it clicks. For Hook hook the hook and snap.

  4. Check your work

    Lower the wiper and turn on the washer. Make sure that the brush fits tightly to the glass and does not leave streaks.

If the brushes jump or do not clean the glass evenly, check:

  • 🔧 Mount: The brush may be installed crookedly.
  • 💧 Glass condition: greasy stains or wax impair adhesion.
  • ❄️ Ice on rubber: Brushes may freeze in cold weather - use deicer.
What to do if the brush does not come off?

If the fastener is stuck, spray WD-40 on the fastener and wait 2-3 minutes. Do not hit the blade - this may bend the wiper arm!

Typical mistakes when choosing and replacing brushes

Even experienced drivers sometimes make mistakes that shorten the life of the brushes or impair their performance. Here are the most common mistakes owners make Almera G15:

  1. Buying the wrong size brushes

    Installing a 550 mm brush instead of 600 mm results in 10–15% of glass remains uncleaned. Always check the size chart!

  2. Ignoring Mount Type

    Fastenings Hook And Pinch Tab not interchangeable! If you buy a brush with the wrong mount, you will have to return it.

  3. Savings on brand

    Brushes without a brand for 200–300 rubles last 2–3 months, while Bosch or Denso enough for 1.5–2 years. In terms of service life, cheap brushes are more expensive.

  4. Improper care

    Pressure washing brushes (such as in a car wash) destroys the rubber. You can't clean them either. gasoline or solvents - this leads to cracking.

Another common mistake is using brushes in winter without preparation. Before frost, treat the rubber with silicone lubricant (for example, Liqui Moly Silicone-Spray) to prevent freezing.

How to extend the life of your windshield wiper blades

The average service life of brushes is 6–12 months, but with proper care it can be increased by 1.5–2 times. Here are proven methods:

  • 🚿 Regular cleaning: Once a month, wipe the rubber with a damp cloth and soapy water. This removes abrasive particles (sand, dust) that wear down the brush.
  • ❄️ Winter preparation: treat brushes before frost anti-icing spray (For example, Sonax Anti-Frost). Do not use hot water for defrosting!
  • 🔧 Pressure check: If the blades leave streaks, the windshield wiper springs may be weak. Adjust the tension (to Almera G15 this is done with a 10 mm wrench).
  • 🌞 UV protection: When parking for a long time in the sun, raise the wipers to prevent the tires from drying out.

⚠️ Attention: Never turn on the windshield wipers if there is ice or snow on the glass! This leads to rubber deformation and breakdown of the wiper motor. Use a washer or scraper first.

If the brushes begin to “squeak”, this is a sign that the rubber has lost its elasticity. Temporary solution - process it glycerin (not silicone!), but it’s better to replace it immediately.

Where to buy brushes for Almera G15: prices and tips

Wiper blades for Nissan Almera G15 You can buy it in several places, but prices and quality vary greatly. Here are the current proposals for 2026:

Place of purchase Brand (600/400 mm) Price (RUB) Pros Cons
Official dealer Nissan Original 2500–3000 1 year warranty, 100% compatibility Expensive, long wait
Online stores (Wildberries, Ozon) Bosch, Denso 1200–1800 Fast delivery, frequent discounts Risk of running into a fake
Auto stores (AutoSpetsTsentr, Existence) Valeo, HELLA 900–1500 Can be checked before purchasing Limited assortment
Flea markets (Avito, Drom) Used original 500–1000 Cheap No guarantee, risk of buying worn

Buying tips:

  • 🛒 Check it out country of origin on the packaging. Original Bosch And Denso They are made in Germany and Japan, fakes are made in China.
  • 📦 The kit should include mounting adapters. If they are not there, it is a fake or a low-quality universal brush.
  • 💳 Payment by card provides an additional guarantee (you can challenge the purchase if the brushes turn out to be defective).

If you buy brushes online, pay attention to reviews with photos. Often sellers post photographs of the original packaging, where you can see serial number — it can be checked on the manufacturer’s website.

FAQ: Frequently asked questions about windshield wiper blades on Almera G15

Is it possible to supply brushes with a length of 650 mm instead of 600 mm?

No, this will cause the brush to touch the plastic casing under the windshield. The maximum permissible length for the driver's side is 600 mm. If you need improved edge cleaning, consider brushes with asymmetrical profile (for example, Bosch Aerotwin AR650S, but only if they fit the mount).

How often do you need to change brushes on Almera G15?

Recommended interval - every 6–12 months. But if you notice any of these signs, replace your brushes immediately:

  • 🌧️ Streaks or stains remain after work.
  • 🔊 A creaking or knocking sound appears when moving.
  • 👓 The rubber has cracked or lost its flexibility.
Are brushes from Renault Logan or Lada Vesta suitable?

Partially. On Renault Logan (2nd generation) and Lada Vesta brushes of the same sizes (600/400 mm) are installed, but mounting may vary. U Almera G15 more often used Pinch Tab, whereas on Logan — Hook. Check the fastening type before purchasing!

Is it possible to restore old brushes?

Temporary solution - polish the rubber with fine sandpaper (grit 1000–1500) and treat with silicone grease. But this will extend the life of the brushes by a maximum of 1–2 months. It's better to buy new ones right away.

Why do new brushes not clean glass well?

The reasons may be as follows:

  • 🧴 Glass covered wax or silicone After washing, clean it with alcohol.
  • 🔧 Brushes installed wrong side (on some models there is a direction of movement).
  • ❄️ The rubber has not yet “got used to it” - let it work for 10-15 cycles.