Interior rear view mirror Nissan Qashqai J10 (2007–2013) is not just a review element, but a key safety component. Over time, it becomes dull, scratched, or malfunctions due to electronics (if equipped with auto-dimming or sensors). Owners are often faced with the problem of choosing between an original mirror and analogues, not knowing how to avoid fakes or unsuitable models.
In this article we will look at all the nuances: from article numbers and compatibility to step-by-step replacement and configuration. You will learn how to distinguish a fake from an original, which analogues are best suited, and what to do if the mirror does not work after installation. And also - unique life hacks for repairing backlights and sensors that are not in standard instructions.
Original mirrors for Nissan Qashqai J10: articles and features
Original rear view mirrors for Qashqai J10 were produced in several modifications, depending on the vehicle configuration. Main articles:
- 🔹 26510-JM00A — basic version without auto-dimming (for models without a rear view camera).
- 🔹 26510-JM00B — with auto-dimming (electrochromic), compatible with light/rain sensors.
- 🔹 26510-4M000 - for versions with a rear view camera (rare, often confused with J11).
- 🔹 26510-4M010 — mirror with integrated microphone (for hands-free systems).
Important: article numbers may vary depending on the year of manufacture and market. For example, mirrors for the European market (JM00A/B) are not always compatible with Asian versions (4M000/010). Before purchasing, check the vehicle's VIN or check the sticker on the back of an old mirror.
Original mirrors Nissan are produced by the company Gentex (USA) is a guarantee of quality, but the price is appropriate: from 8,000 to 15,000 rubles, depending on the modification. The main advantage is the perfect fit and 100% compatibility with the car’s electronics.
⚠️ Attention: There are often counterfeits of the article on the market 26510-JM00B (with auto-dimming). You can distinguish them by weight (the original is 30-40% heavier) and the quality of the plastic - counterfeit ones are more fragile and have a strong chemical smell.
| Article | Mirror type | Compatibility | Approximate price (RUB) |
|---|---|---|---|
| 26510-JM00A | No auto-dimming | All J10 configurations | 6 500 – 8 000 |
| 26510-JM00B | With auto-dimming | Complete sets with light/rain sensors | 12 000 – 15 000 |
| 26510-4M000 | With rear view camera | Rare versions for the Asian market | 18 000 – 22 000 |
- Original without auto-dimming
- Original with auto-dimming
- Analogue (what brand?)
- I don't know, haven't checked
Analogues of the original mirror: what to choose and what to pay attention to
If the original mirror seems too expensive, you can consider analogues from trusted manufacturers. The main thing is to ensure compatibility with the mount and electronics Qashqai J10.
The best analogues:
- 🔧 Febi Bilstein (article 26510) is a budget alternative (price ~4,000 rubles), but without auto-dimming. Suitable for basic configurations.
- 🔧 Hella (article 8DL 008 507-001) is a high-quality auto-dimming mirror, compatible with most Qashqai J10 (price ~9,000 rub.).
- 🔧 Meyle (article 120 265 0001) - middle segment, good quality plastic, but sometimes there are problems with mounting the bracket.
- 🔧 Denso (article 88910-35010) is a premium analogue, practically not inferior to the original (price ~11,000 rubles).
When choosing an analogue, pay attention to:
- Mounting type - y Qashqai J10 A standard bracket with two latches is used. Some analogues (for example, from Valeo) may require modification.
- Availability of connectors — if your mirror is auto-dimming, check the number of contacts (the original has a 4-pin connector).
- Dimensions — the size of the mirror must match the original (190×80 mm).
⚠️ Attention: Mirrors from Renault Koleos (first generation) are similar in appearance, but not compatible with Qashqai J10 due to different power connectors. Do not fall for the tricks of sellers who claim otherwise!
Before buying an analogue, remove the old mirror and compare the connectors. If the contacts do not match, you can use an adapter, but this may cause problems with auto-dimming.
Step-by-step instructions for replacing a rear view mirror
Replacing the mirror in Nissan Qashqai J10 does not require special skills, but it is important to follow the algorithm so as not to damage the plastic clips or wiring. All you need:
- 🔩 Flat screwdriver (or plastic pick).
- 🔧 A rag or towel (so as not to scratch the plastic).
- 🔌 Multimeter (to check contacts if the mirror is equipped with electronics).
Step 1: Removing the old mirror
- Lower the mirror mounting lever down (to the "day" position).
- Insert a screwdriver into the gap between the mirror and the bracket from the bottom. Carefully pry up the latch.
- Repeat on the top side. The mirror should come out of the grooves.
- Disconnect the power connector (if the mirror is auto-dimming).
Step 2: Installing a New Mirror
- Connect the connector to the new mirror (if available). Check polarity!
- Secure the mirror into the bracket, starting with the top latch.
- Press down on the bottom until you hear a click.
- Check the auto-dimming operation (if any) - shine a flashlight on the sensor.
☑️ Check after installation
Step 3: Setup and Calibration
If the mirror is auto-dimming, the sensors may need to be calibrated. To do this:
- Turn on the ignition.
- Point a bright light (such as the headlights of another car) at the mirror sensor.
- Wait 10-15 seconds - the mirror should darken.
- If there is no reaction, check the fuse
F37 (10A)in the salon block.
What to do if the mirror does not dim?
The problem may be a broken wire or oxidation of the contacts. Remove the headliner and check the circuit from the light control unit (located behind the glove compartment).
Common faults and how to fix them
Rear view mirrors in Qashqai J10 Most often they fail for three reasons: mechanical damage, problems with electronics or wear of the coating. Let's look at each of them.
1. Mechanical damage
Cracks in the plastic or chips in the reflective layer usually appear due to impacts or sudden temperature changes. If the damage is not critical (for example, minor scratches), you can polish the mirror with paste GOI or a special composition for glass. Deep cracks are a reason for replacement.
2. Auto dimming does not work
If the mirror does not respond to light, the reasons may be as follows:
- 🔋 fuse - check
F37 (10A)in the fuse box (under the steering wheel). - 🔌 Broken wire — most often the harness frays near the mounting bracket.
- 📱 Sensor malfunction — if the mirror darkens spontaneously, the light sensor requires replacement.
For diagnostics:
- Remove the mirror and check the voltage at the connector with a multimeter (should be
12Von pins 1 and 3). - If there is no voltage, the problem is in the wiring. If there is, but the mirror does not work, the module itself is faulty.
3. The reflective coating peels off
Over time, the silver coating on the back of the mirror oxidizes, causing dark spots to appear. This is irreparable and requires replacement. Temporary solution: stick on a reflective film (sold in car dealerships), but this will worsen the view.
If auto-dimming does not work correctly (for example, it is triggered by the sun, but not by the headlights), the problem lies in setting the sensitivity of the sensor. It can be calibrated via the diagnostic connector (requires a scanner, e.g. Launch X431).
Modernization: installation of a mirror with a rear view camera
Many owners Qashqai J10 want to upgrade the standard mirror to a model with a rear view camera. This is possible, but will require some modifications:
What you will need:
- 📹 Mirror with camera (for example, Boyo VTK-200 or original
26510-4M000). - 🔧 Set of wires for connecting to the radio.
- 🔨 Drill (for installing the camera in the rear bumper).
Step by step process:
- Remove the old mirror and connect the new one to power (use the connector from the standard auto-dimming wiring).
- Install the camera in the bumper (the standard place is above the license plate). Drill a hole and secure the camera with silicone sealant.
- Lay the video cable from the camera to the radio (you can run it along the threshold and under the ceiling trim).
- Connect the camera to the radio via
RCA connector. If your radio does not support the camera, you will need an adapter (for example, Pumpkin Android Auto). - Set the camera to turn on automatically during reverse gear (connect the positive wire of the camera to the reverse lamp).
The cost of such an upgrade: from 5,000 rubles. (Chinese camera + mirror) up to 20,000 rub. (original mirror + professional installation).
⚠️ Attention: When installing the rear view camera in Qashqai J10 Often there is a problem with the "mirror" image. This can be solved by setting the camera menu (option Mirror Mode).
If you don't want to drill into the bumper, you can use a camera on the license plate frame. It is attached without modifications and is connected in the same way as the standard one.
Cleaning and care: how to extend the life of a mirror
Salon mirror Qashqai J10 requires regular maintenance, especially if it is auto-dimming. Basic rules:
- 🧼 Cleaning: Use microfiber and an alcohol-based cleaner (such as Sonax Glass Cleaner). Do not use abrasives!
- 🌡️ Sun protection: When it's hot, cover your mirror with a light shield to prevent the electronics from overheating.
- 💧 Humidity: If the interior is damp, wipe the mirror contacts with a dry cloth (oxidation leads to auto-dimming failures).
For auto-dimming mirrors:
- Once every six months, check the operation of the sensors - point a flashlight at them. If the reaction is slow, wipe the sensors with a cotton swab soaked in alcohol.
- Do not touch the reflective surface with your fingers - greasy marks will impair sensitivity.
If the mirror begins to “sweat” from the inside, this is a sign of depressurization. Silica gel (a bag of beads placed behind a mirror) will help temporarily, but in the long term it will require replacement.
Where to buy and how much does a replacement cost in the service?
Prices for mirrors and labor to replace them vary depending on the region and type of service. Here are the approximate prices:
| Service/Product | Cost (RUB) | Where to buy/order |
|---|---|---|
| Original mirror 26510-JM00B | 12 000 – 15 000 | Official dealers, Exist.ru, Autodoc |
| Analogue Hella 8DL 008 507-001 | 8 000 – 9 500 | Autolight, PartReview, spare parts markets |
| Mirror replacement (work) | 800 – 1 500 | Any car service or electrician |
| Installing a mirror with a camera | 3 000 – 6 000 | Auto electronics services (for example, CarCam) |
Buying Tips:
- 🛒 On Avito And Drom.ru They often sell used mirrors in good condition (the price is up to 50% lower than the original). Before purchasing, check the auto-dimming operation!
- 🌍 Ordering from AliExpress or eBay, pay attention to reviews about compatibility with Qashqai J10. Popular brands: Boyo, Rear View Safety.
- 🔧 At the service center, ask for a warranty on the work - when installing a mirror with a camera, problems with wiring often arise.
FAQ: Frequently asked questions about the rear view mirror in Nissan Qashqai J10
Is it possible to install a mirror from Qashqai J11 on J10?
No, mirrors are not compatible. U J11 another mounting bracket and power connector. The exception is some universal analogues (for example, from Hella), but they need to be selected according to size.
Why does an auto-dimming mirror not work correctly (it spontaneously darkens)?
This is a typical problem when the sensor contacts are oxidized or the control unit is faulty. Try:
- Clean the mirror connector contacts with alcohol.
- Check fuse
F37. - Calibrate the sensor (direct a bright light at it for 20 seconds).
If this does not help, the mirror or light control unit needs to be replaced.
How to remove a mirror if the latches are broken?
If the plastic latches have broken off, carefully pry the mirror from the side with a thin screwdriver while pulling it towards you. The main thing is not to damage the bracket. As a last resort, you can drill out the remaining latches and install a new mirror using glue (for example, 3M VHB).
Can auto dimming be repaired?
Theoretically yes, but it is difficult and often unjustified. The mirror uses an electrolytic gel that dries over time. Workshops offer “refilling” with gel, but this is a temporary solution (cost ~3,000 rubles). It's better to buy a new mirror.
Which mirror is better to choose for tuning: with a camera or with sensors?
Depends on your needs:
- 📹 With camera - convenient for parking, but requires wiring and configuration.
- 🌓 With auto-dimming - easier to install, improves comfort when driving at night.
- 🎤 With microphone - relevant if you do not have a standard hands-free system.
The best option is a mirror with a camera and auto-dimming (for example, Boyo VTK-200).