Nissan Teana J32 is a business sedan that has gained popularity thanks to its spacious interior, comfortable suspension and reliable engines. However, when choosing a used car or planning parking, many are faced with the question: what kind of car does it have? exact dimensions? In this article we will look at all sizes in detail. Teana J32 (2008–2013), including length, width, height, wheelbase, ground clearance and trunk capacity. We will also compare them with their main competitors and give practical advice on operation.
The model was produced in several modifications, and their sizes could differ slightly. For example, versions with all-wheel drive (4WD) had greater ground clearance, and the 2011 restyled version received updated bumpers, which affected the overall length. If you are planning a purchase or already own Teana J32, this information will help you avoid mistakes when choosing a parking space, transporting large cargo or installing non-standard equipment.
Main dimensions of Nissan Teana J32 (2008–2013)
Basic sizes Nissan Teana J32 remained unchanged throughout the entire release, but some parameters depended on the configuration and sales market. Below are official data for the most common versions:
- 📏 Length: 4,850 mm (before restyling) / 4,865 mm (after 2011)
- 📐 Width: 1,795 mm (excluding mirrors) / 2,020 mm (including folded mirrors)
- 📊 Height: 1,490 mm (basic version) / 1,510 mm (with roof rails or panoramic roof)
- 🔄 Wheelbase: 2,775 mm (same for all modifications)
- 🚗 Ground clearance (ground clearance): 150 mm (front-wheel drive) / 160 mm (all-wheel drive)
It is important to note that actual dimensions may vary slightly due to installed accessories (eg alloy wheels larger diameters reduce ground clearance by 5–10 mm). The height is also affected by the loading of the car: when the trunk and interior are fully loaded, the clearance decreases by 10–15 mm.
When measuring dimensions for a garage or parking space, always add 20-30 cm of extra space. This will take into account open doors, trunk and possible errors when maneuvering.
Comparison of Teana J32 sizes with competitors
In the business sedan class Nissan Teana J32 competed with such models as Toyota Camry (XV40), Honda Accord (CP) And Mazda 6 (GH). For clarity, here is a comparative table of key parameters:
| Parameter | Nissan Teana J32 | Toyota Camry XV40 | Honda Accord CP | Mazda 6 GH |
|---|---|---|---|---|
| Length, mm | 4 850–4 865 | 4 805 | 4 765 | 4 755 |
| Width, mm | 1 795 | 1 820 | 1 847 | 1 795 |
| Height, mm | 1 490–1 510 | 1 480 | 1 470 | 1 440 |
| Wheelbase, mm | 2 775 | 2 775 | 2 705 | 2 675 |
| Ground clearance, mm | 150–160 | 160 | 150 | 155 |
Teana J32 has the longest wheelbase among competitors (2,775 mm), which provides maximum comfort for rear passengers. However, it is inferior in width Honda Accord, which can be critical when choosing a car for narrow garages. Ground clearance Teana average for the class, but all-wheel drive versions (4WD) have an advantage on bad roads.
- Dimensions (length/width)
- Ground clearance (ground clearance)
- Trunk volume
- Wheelbase (legroom)
- Other
Trunk volume: how much does the Teana J32 hold?
Official trunk volume Nissan Teana J32 amounts to 490 liters. However, this indicator may vary depending on the configuration:
- 📦 Basic version: 490 l (with spare wheel
dokatkaor full size) - 🔊 With Bose audio system: 470 l (due to the subwoofer in the trunk niche)
- 🔋 Hybrid version (J32 Hybrid): 450 l (batteries take up part of the space)
For comparison: Toyota Camry XV40 the trunk holds 506 liters, and Honda Accord CP - 456 l. Thus, Teana occupies an intermediate position. With the rear seats folded (in proportion 60:40) volume increases to 1,200–1,300 l, which allows you to transport large loads.
⚠️ Attention: When transporting heavy loads (over 100 kg), check the load on the rear axle. Exceeding the permissible weight can lead to sagging springs and a decrease in ground clearance to 130–140 mm.
How to load the trunk correctly?
Distribute weight evenly by placing heavy objects closer to the rear seatbacks. Avoid misalignment as this may affect handling. If you are transporting long loads (such as skis), use special roof racks to avoid blocking your view through the rear window.
Teana J32 ground clearance: myths and reality
One of the most discussed parameters is ground clearance. Official ground clearance Teana J32 is:
- 150 mm for front-wheel drive versions (2WD);
- 160 mm for all-wheel drive (4WD).
However, in practice these figures may differ.
Factors influencing actual clearance:
- Car loading: when fully loaded, the clearance decreases by 10–20 mm.
- Spring wear: after 100,000 km, the ground clearance may decrease by 5–10 mm.
- Wheels and tires: installation of low-profile tires (for example, 225/45 R18) reduces the clearance by 10–15 mm compared to standard 215/60 R16.
To check the current ground clearance, use a tape measure or ruler, measuring the distance from the bottom edge of the bumper to the ground underneath. front and rear axle. The difference between them should not exceed 10 mm - otherwise suspension diagnostics are required.
Measure the clearance under the front and rear axles|Check the springs for cracks or subsidence|Assess the condition of the shock absorbers (if there are any leaks)|Make sure that the crankcase protection is not deformed-->
How do the dimensions of the Teana J32 affect operation?
Knowing the exact dimensions of your car helps you avoid problems in everyday use. Here are some practical tips:
- Garage parking: The minimum width of the gate should be 2 300 mm (including open doors). Garage height - not less 1 600 mm (if roof rails are installed).
- Washing at a car wash: When choosing a contactless car wash, check whether it is suitable for cars of length 4.8–4.9 m. Some automatic portals have a length limit.
- Transportation by tow truck: if transportation is required, inform the dispatcher of the exact dimensions. Some tow trucks are not designed to accommodate vehicles with a wheelbase greater than 2.7 m.
It is also worth considering that Teana J32 has large turning radius - about 5.6 m. This can create difficulties when maneuvering in tight yards. For comparison: Toyota Camry XV40 turning radius is 5.4 m.
⚠️ Attention: When installing a non-standard bumper or body kit, check whether the ground clearance has decreased. Some tuning kits reduce the clearance to 120–130 mm, which is critical for Russian roads.
Frequently asked questions about Nissan Teana J32 sizes
What is the real ground clearance of the Teana J32 after 10 years of operation?
After 100,000–150,000 km, the ground clearance of the front-wheel drive version is usually 135–145 mm (instead of factory 150 mm). This is due to natural wear and tear on springs and shock absorbers. All-wheel drive versions lose about 10 mm, dropping to 150 mm. To restore clearance, it is recommended to replace the springs or install spacers (but this may impair handling).
Will the Teana J32 fit into a standard 5x2.5 m garage?
Yes, but with reservations:
- The length of 4.85 m will allow you to place the car with a margin of ~15 cm in front and rear.
- A width of 1.795 m leaves 35 cm on each side, but open doors will require at least 2.3 m free space.
- Height will not cause problems if the garage does not have shelves or lamps below 1.6 m.
Advice: use folding mirrors (if electric) to save 10–15 cm in width.
Is it possible to install tires larger than the standard size on the Teana J32?
Yes, but with restrictions:
- Maximum recommended size: 225/55 R17 or 235/50 R18.
- Installation 245/45 R18 possible, but will require rolling out the arches (due to the risk of touching when the steering wheel is turned completely).
- Increasing the diameter of the discs to R19 will reduce the ground clearance by 15–20 mm and worsen comfort on rough roads.
Important: After changing the tires, be sure to perform a wheel alignment, since changing the wheel size affects the alignment angles.
How much does Teana J32 weigh and how does this affect the dimensions?
Curb weight Teana J32 varies from 1,450 kg (basic version with engine QR25DE) to 1,620 kg (all-wheel drive version with VQ35DE). The total weight is 2,000–2,100 kg. When fully loaded:
- Ground clearance decreases by 10–15 mm.
- The rear of the car sags by 20–30 mm, which can lead to bumper contact on steep exits.
- The load on the rear axle increases, so avoid overloading the trunk (maximum 400–450 kg).
What are the dimensions of the Teana J32 station wagon?
Nissan Teana J32 was produced only in the body sedan. There were no station wagons or hatchbacks on this platform. If you want a similar car with a larger trunk, consider:
- Nissan Stagea M35 (station wagon on platform Skyline),
- Toyota Avensis T27 (station wagon with trunk 500–1,600 l),
- Subaru Outback (cross station wagon with 200 mm ground clearance).
They all have similar dimensions in length and width, but exceed Teana by trunk volume.
The Nissan Teana J32 is one of the most spacious sedans in its class thanks to its long wheelbase (2,775 mm). However, its dimensions require careful consideration when parking and loading, especially on poor roads or cramped garages.