Nissan Almera is one of the most popular sedans in Russia, and replacing the windshield for this model becomes an urgent task after 5-7 years of operation. Chips, cracks or complete destruction of the glass require precise selection of spare parts, but here difficulties await the owners: sizes vary depending on the generation, body and even configuration. An error in selection will lead to problems with installation, tightness or operation of the sensors (if the glass is heated or with a camera).

In this article we will look at exact dimensions of windshields for all versions Almera (including restyled ones), we will provide article numbers of original and proven analogues, and also give practical advice on replacement. We will pay special attention to the nuances that are silent about the services: for example, why glass from Almera Classic (N16) not suitable for Almera G15 2021, even if they look identical. If you are planning a replacement yourself, here you will find step-by-step instructions with photos and warnings about common errors.

Generations Nissan Almera and their influence on glass dimensions

Over the history of the model there have been 4 main generations Almera, and each has unique windshield dimensions. Even within the same generation, sizes may differ due to restyling or a change in manufacturer (for example, glass for European and Russian assembly Almera G15 have different curvatures).

Let's look at the key differences:

  • 🔹 N15 (1995–2000) - the first generation with a “square” glass shape. Dimensions: 1350×750 mm (height×width). Suitable for hatchback body only.
  • 🔹 N16 (2000–2006, Almera Classic) - the glass has become wider and lower: 1400×720 mm. Important: different article numbers are used for versions with and without air conditioning!
  • 🔹 G15 (2012–2018, Russian assembly) - radical design change. Dimensions: 1450×800 mm, but since 2015 (restyling) the glass has become 15 mm narrower on the sides.
  • 🔹 B17 (2019–present) — modern version with “panoramic” glass: 1500×850 mm. Having a camera is critical here LDW (lane departure warning systems).

⚠️ Attention: There are often “universal” glasses on the market for Almera G15 And B17, but they do not take into account the difference in bend radius. For example, glass from G15 The 2013 model will not fit tightly onto the 2017 model - there will be gaps in the corners, which will lead to leaks.

📊 What generation of Nissan Almera do you have?
  • N15 (1995–2000)
  • N16 (2000–2006)
  • G15 (2012–2018)
  • B17 (2019–present)
  • I don't know

Exact dimensions and articles of original glass

To avoid mistakes when purchasing, focus on Vehicle VIN code or data from the old glass label (usually located in the lower left corner). Below is a table with current article numbers for the most common versions Almera in Russia:

Generation Years of manufacture Dimensions (H×W), mm Original article number Notes
Almera N16 (Classic) 2000–2006 1400×720 26510-4M000 No heating. For versions with air conditioning: 26510-4M001
Almera G15 (dorestyle) 2012–2015 1450×800 26510-BM40A With heated wiper area. Not suitable for restyling!
Almera G15 (restyling) 2015–2018 1450×785 26510-BM40B The angle of inclination on the sides has been changed. Camera LDW optional.
Almera B17 2019–2023 1500×850 26510-4M60A Only with camera LDW and a light/rain sensor.
Almera B17 (restyling 2023) 2026–... 1500×850 26510-4M60B Updated glass with improved sound insulation.

⚠️ Attention: Article numbers of original glasses are often counterfeited. Check availability Nissan holograms on the packaging and certificate of conformity. Counterfeits may have distorted optics, which will lead to glare when driving at night.

If the original is too expensive (from 15,000 to 30,000 rubles), consider analogues from trusted brands:

  • 🔧 Pilkington — articles begin with PGW (For example, PGW 1450-800 for G15).
  • 🔧 Saint-Gobain Sekurit — marking SG + size (for example, SG 1500x850 B17).
  • 🔧 XYG - a budget option (from 8,000 ₽), but check the reviews for a specific item.
💡

When purchasing an analogue, check with the seller whether the glass is certified according to GOST R 51709-2001. Without a certificate, glass may not pass technical inspection.

How to measure your windshield yourself

If you are not sure about the generation of the car or there is no information on the glass label, you will have to take measurements manually. For this you will need:

  • 📏 Tape measure or ruler ≥ 1.5 m long.
  • 🧲 Magnetic square (for precise measurement of angles).
  • 📝 Notepad for notes.

Procedure:

  1. Measure width glass along the top edge (from corner to corner).
  2. Measure height in the center - from the bottom edge to the top.
  3. Check bend radius: Place a ruler diagonally on the glass. If the gap is > 3 mm, the glass has complex curvature (relevant for B17).
  4. Please note sensor holes (if any). Their location must match the original.

⚠️ Attention: Do not measure the glass without removing it from the car! Even a small displacement will lead to an error of 5–10 mm, which is critical for heated glass (the wires may not align with the connectors).

Measure the width and height accurate to the nearest mm|Check the presence of heating/sensors|Check the article number with the car's VIN code|Check the certificate of conformity|Inspect the glass for bubbles/chips (even on a new one!)

-->

Replacement nuances: what to consider before installation

Replacing the windshield with Nissan Almera - not such a simple task as it seems. Here are the key points that are often forgotten:

1. Glue and sealant. Original glue from Nissan — KE-9500, but it will also work 3M PU590 (for heated windows). Important: polymerization time - 24 hours. If you start driving earlier, the glass may move.

2. Sensors and cameras. On Almera B17 glass integrated with camera LDW and a light/rain sensor. Required when replacing recalibration via a diagnostic scanner (for example, Launch X431). Without this, the lane departure warning system will not work correctly.

3. Heating wires. On G15 And B17 heating of the wiper zone is connected via a connector J12. Check the integrity of the wires before installing new glass!

4. Sound insulation. On Almera B17 2023 glass has additional acoustic layer (labeling Acoustic on the label). If you install regular glass, the noise level in the cabin will increase by 3-5 dB.

What happens if you don't recalibrate your LDW camera?

After replacing the glass with Almera B17 uncalibrated camera LDW will give false alarms: for example, “pull” the car to the side when driving in a straight line or ignore the markings. In some cases, an error will appear on the dashboard C1A99 (“Camera malfunction”). This can only be corrected at a service station with diagnostic equipment.

Step-by-step instructions for replacing glass

If you decide to change the glass yourself, follow this algorithm. Opening hours: 3–4 hours (excluding time for glue drying).

Tools:

  • 🔨 Knife for cutting glue (for example, Stanley 10-099).
  • 🧴 Suction cups for glass (2 pcs., load capacity ≥ 20 kg).
  • 🧴 Degreaser (Loctite 7063 or acetone).
  • 🔧 Screwdriver with a flat blade (for removing moldings).

Step 1. Dismantling the old glass.

  1. Remove the wipers and plastic covers under the windshield.
  2. Carefully pry up the moldings (rubber seals) around the perimeter.
  3. Using a glue knife, cut the sealant along the entire contour. Start from the top corner.
  4. Use suction cups to remove the glass. Attention: Don’t pull at the corners - just pull evenly over the entire area!

Step 2. Surface preparation.

  1. Remove any remaining old glue from the body (you can use a scraper or drill with a brush attachment).
  2. Degrease the surface. On Almera B17 pay attention to the area around the camera - there should be no oil or silicone here.
  3. Apply new glue along the outline. Layer thickness: 5–7 mm.

Step 3: Installing new glass.

  1. Carefully lower the glass into place, starting from the bottom edge.
  2. Check the alignment of the sensor holes (if any).
  3. Secure the glass with tape or clamps for 1 hour (for preliminary fixation).
  4. Reinstall the moldings and wipers.

⚠️ Attention: Do not turn on the heated glass within 48 hours after installation! Heat may interfere with the polymerization of the adhesive.

💡

The most common mistake when replacing it yourself is improperly cleaning the surface. Even small particles of dust or rust will lead to leaks or peeling of the glass after 1-2 years.

Common problems after replacement and how to avoid them

Even if the replacement was carried out according to the instructions, the owners Almera face typical problems. Let's look at their reasons and solutions:

1. Water leaks into the cabin.

Reason: leaky seam or damaged molding. Solution:

  • Check the glue in the corners of the glass - there are often voids there.
  • Apply additional sealant (ABRO WS-904) outside.

2. Airbag deployment.

Reason: on Almera B17 The shock sensor is located under the windshield. If dismantled carelessly, an error may occur. B1017. Solution:

  • Reset the error using the diagnostic scanner.
  • If the error repeats, check the sensor connector (it may be damaged).

3. Extraneous noise at speeds > 100 km/h.

Reason: glass misalignment or lack of acoustic layer (relevant for B17 2023). Solution:

  • Check the gaps at the corners of the glass - they should be the same.
  • If the glass is ordinary (not Acoustic), install additional sound insulation (StP Gold).

4. Heating of the wiper area does not work.

Cause: damaged wires or incorrect connector connection J12. Solution:

  • Test the wires with a multimeter (resistance should be 1–3 ohms).
  • Check the fuse F37 (10A) in the block under the hood.
💡

If, after replacing the glass, a high-speed whistle appears, check the moldings - they may have moved during installation. It is enough to correct their position, and the whistle will disappear.

Replacement cost: service vs self-installation

Windshield replacement cost Nissan Almera depends on generation, type of glass and region. Below are the average prices in Russia for 2026:

Generation Cost of glass (₽) Cost of work in the service (₽) Total (₽)
Almera N16 5 000–8 000 3 000–4 500 8 000–12 500
Almera G15 (without heating) 7 000–12 000 4 000–5 500 11 000–17 500
Almera G15 (heated) 12 000–18 000 5 000–6 500 17 000–24 500
Almera B17 (with LDW camera) 20 000–30 000 6 000–8 000 26 000–38 000

Replacing it yourself will cost less, but keep in mind hidden costs:

  • 💰 Glue and consumables: 1,500–2,500 ₽.
  • 💰 Rent of suction cups (if you don’t have your own): 500–1,000 ₽.
  • 💰 Camera calibration (for B17): 2 000–3 000 ₽.

⚠️ Attention: Some services offer an “economy” replacement option using universal glue (Teroson Terostat 8590). It is cheaper, but has a shorter service life (3–4 years versus 7–10 for the original).

FAQ: Frequently asked questions about windshields Nissan Almera

Is it possible to install glass from Almera G15 on Almera B17?

No, that's impossible. Despite the external similarity, the glasses differ:

  • Dimensions: B17 50 mm wider and 30 mm higher.
  • Curvature: y B17 “flat” glass for better aerodynamics.
  • Holes for sensors: on B17 there is room for a camera LDW, which is not on G15.

Installing non-original glass will lead to leaks and distorted views.

How to check whether the original glass is installed?

Original glass Nissan have the following characteristics:

  • Logo Nissan or AGC (manufacturer) in the lower left corner.
  • Hologram on the package with serial number.
  • Marking DOT (meets American standards) or E4 (European).
  • On the heated windows there is an inscription HEATED and wire resistance 1–3 ohms.

Counterfeits often have blurry markings or no hologram.

What to do if after replacement there are glares from the headlights?

Glare occurs due to:

  • Incorrect installation (glass is offset relative to the body).
  • Optical distortions in cheap analogues (especially from brands XYG or BOS).
  • Residual stress in the glass (if it was stored incorrectly).

Solution:

  1. Check the gaps at the corners of the glass - they should be the same.
  2. If glare remains, replace the glass with an original or certified equivalent (Pilkington or Saint-Gobain).
Is it possible to drive with a crack in the windshield?

Legislatively in Russia prohibited operation of a vehicle with a crack in the driver’s viewing area (clause 4.3 of the List of Traffic Regulations faults). Fine: 500 ₽ (Article 12.5 of the Administrative Code).

Technical risks:

  • A crack > 10 cm in length reduces the strength of glass by 60–70%. In an accident it may fall apart.
  • Obstructed vision (especially at night) increases the risk of an accident.
  • On Almera B17 a crack could damage the camera LDW, which will lead to an error C1A99.

If the crack is <5 cm and is not in the wiper area, you can temporarily seal it with polymer (Permatex 09103), but this does not eliminate the need for replacement.

What glue is best to use for Almera B17?

For Almera B17 recommended:

  • 3M PU590 — universal polyurethane adhesive, polymerization time 24 hours.
  • SikaTack Drive - fast-acting (you can drive in 1 hour), but expensive (≈ 3,500 ₽).
  • Nissan KE-9500 - original, but difficult to find in retail.

⚠️ Do not use silicone sealants (ABRO, Mannol) - they do not provide sufficient strength and will begin to peel off after 1–2 years.