Choosing wipers for Nissan Murano Z52 (2015–2026 release) is a task that only seems simple. Incorrectly selected blades not only impair visibility in the rain, but can also damage the windshield or drive mechanism. In this article we will look at exact dimensions of original wipers, compatible analogues, replacement nuances and typical mistakes that owners make.
Model Z52 is the third generation of the crossover, and here the manufacturer used non-standard solutions. For example, asymmetric brush sizes (left and right are different), as well as a specific form of fastening. If you have never changed the wipers on this car, prepare for surprises: even in official catalogs there are sometimes discrepancies. We checked data on VIN codes from different years and collected up-to-date information.
Official wiper sizes for Nissan Murano Z52
According to the factory documentation, for Nissan Murano Z52 (including restyled versions 2018 and 2021) the following sizes are provided:
- 🔹 Left brush (driver's side): 650 mm (26 in)
- 🔹 Right brush (passenger side): 450 mm (18 inches)
Important: these parameters are valid for all trim levels, including SV, SL, Platinum and hybrid versions. However, there is a nuance: in some markets (for example, in the USA), brushes 10–15 mm shorter could be installed in basic configurations. You can check this using the VIN code through the service Nissan Parts Online or from an authorized dealer.
If you buy non-original wipers, pay attention to fastening type. U Murano Z52 system is used J-hook (9x3mm) - This is the standard for most Japanese cars, but some Chinese analogues may have incompatible adapters. Please check the table below before purchasing.
| Parameter | Original (Nissan) | Analogs (Bosch, Valeo, Denso) |
|---|---|---|
| Left brush | 650 mm (art. 28650-JK00A) | 650 mm (Bosch Aerotwin AR651S) |
| Right brush | 450 mm (art. 28651-JK00A) | 450 mm (Valeo Silencio X-TRM 600450) |
| Mounting type | J-hook (9x3mm) | J-hook or universal adapter |
| Material | Rubber + graphite coating | Rubber/silicone (in the premium segment) |
⚠️ Attention: There are counterfeits of the brand on the market Denso with incorrect size markings. Original brushes from this manufacturer for Murano Z52 have a holographic sticker on the packaging and the inscription Made in Japan.
How to check the size of the wipers on your Murano Z52
If you are not sure of the sizes or are buying a used car, it is better to measure the brushes yourself. Here are the step-by-step instructions:
- Raise the wiper to the vertical position (don't forget to turn off the ignition!).
- Take a tape measure or ruler and measure the length rubber part from edge to edge (excluding plastic fastening).
- Compare your data with the table above. Permissible deviation is ±5 mm.
If the brushes are worn out, you can refer to marks on the windshield. On Murano Z52 Sometimes there is a size marking on the bottom of the glass (driver's side). Also check the label on the back of the old brush - the article number may be indicated there.
Measure the length of the old brushes|Look at the markings on the glass or label|Make sure the mount is compatible (J-hook)|Check for adapters included (for universal models)|Check the article number with the manufacturer's catalog-->
Tip: If you buy brushes online, look for options marked OE Quality (Original Equipment). This means they are certified for assembly line use. Nissan and are guaranteed to fit.
Top 5 best wipers for Nissan Murano Z52: original and analogues
We analyzed reviews from owners and tests from independent experts (including AutoExpress And Which?) and compiled a rating of the best options for Murano Z52. All models were tested on vehicles produced in 2016–2023.
- 🥇 Original Nissan (art. 28650-JK00A + 28651-JK00A) - perfect fit, long service life (1.5–2 years), but high price (~3,500 rubles per set).
- 🥈 Bosch Aerotwin AR651S + AR450S — silent, with an aerodynamic profile, suitable for winter use. Price: ~2,800 rub.
- 🥉 Valeo Silencio X-TRM 600650 + 600450 — silicone brushes with UV protection, last up to 3 years. Price: ~3,200 rub.
- 4️⃣ Denso Hybrid Wiper Blade (650/450 mm) — hybrid design (metal + rubber), resistant to icing. Price: ~2,500 rub.
- 5️⃣ HELLA EcoWiper (650/450 mm) - a budget option (~1,200 rubles), but requires replacement every 6–8 months.
Among the owners Murano Z52 most often praised Bosch Aerotwin for noiselessness and Valeo Silencio for durability. Original brushes are bought by those who do not want to risk compatibility. But HELLA often criticized for rapid wear and tear in Russian winters.
Original (from the manufacturer)|Premium analogs (Bosch, Valeo)|Budget (HELLA, Champion)|Universal (with adapters)|I don’t know which ones to choose-->
Common mistakes when choosing and replacing wipers
Even experienced car owners sometimes make mistakes that lead to poor performance of windshield wipers or damage to the mechanism. Here are the most common:
- 🚫 Buying brushes by eye - for example, they take 600 mm instead of 650 mm, and the wiper does not reach the edge of the glass.
- 🚫 Ignoring Mount Type — universal brushes without adapter
J-hookwon't fit. - 🚫 Installing winter brushes in summer — they wear out faster on dry glass and can leave streaks.
- 🚫 Using used wipers — the rubber loses its elasticity, and the brushes begin to “jump.”
Another typical problem is incorrect installation. On Murano Z52 the left brush has reverse bend (for a better fit to the glass). If the sides are mixed up, the wiper will not clean the top of the windshield well.
⚠️ Attention: Never turn on the wipers if they are frozen to the glass! This may bend the lever or burn out the drive motor. In cold weather, treat the glass first defrost or warm water (not boiling water!).
Before winter, treat the wiper rubber with silicone lubricant (for example, WD-40 Specialist Silicone) - this will prevent freezing and cracking.
How to extend the life of wipers on a Nissan Murano Z52
The average service life of brushes is 6–12 months, but with proper care they can be used for up to 2 years. Here's what the experts recommend:
- Regular cleaning: once a month, wipe the rubber with a damp cloth, removing sand and resins. Suitable for this
isopropyl alcoholor a special cleaner (for example, Sonax Wiper Blade Cleaner). - Correct position: Before washing, lift the wipers vertically so that they do not rub against the glass when the blade moves.
- UV protection: Park in the shade or use a sunscreen - ultraviolet radiation destroys rubber.
- Winter preparation: treat brushes before frost
anti-icing spray(For example, Liqui Moly Anti-Frost).
If the wipers start to “squeak” or leave streaks, do not rush to change them. Often the problem is solved glass polishing. Use paste 3M Glass Polish or micro scratch remover. Apply it to dry glass in a circular motion, then rinse with water.
What to do if the wipers “jump” on the glass?
This is a sign of rubber deformation or glass contamination. Try:
1. Clean the glass white spirit (will remove fat deposits).
2. Check the fastening of the brush - the connection to the lever may have become loose.
3. If the problem persists, replace the brushes (the rubber has lost its elasticity).
Where to buy wipers for Nissan Murano Z52: trusted sources
It is better to buy original brushes from official dealers Nissan or in certified online stores. Here are reliable options:
- 🛒 Official dealers - guarantee of authenticity, but the price is 20-30% higher than the market. Articles:
28650-JK00A(left),28651-JK00A(right). - 🛒 Exist.ru — a large catalog of analogues, there is a filter by size and fastening. Delivery within the Russian Federation.
- 🛒 AutoDoc — European store with compatibility guarantee. Suitable for ordering Bosch or Valeo.
- 🛒 Wildberries/Ozon - budget options (for example, HELLA or Champion), but there is a high risk of running into a fake.
When purchasing on marketplaces, be sure to check:
- 🔍 Availability of a hologram or protective stickers on the packaging.
- 🔍 Compliance with the article (must match the manufacturer’s catalog).
- 🔍 Reviews with photos - sellers often post images of real buyers.
⚠️ Attention: On AliExpress and similar sites sell wipers marked "For Nissan Murano", but without specifying the size. Most often these are universal brushes with inappropriate fastening. It's not worth the risk!
FAQ: Frequently asked questions about wipers on Nissan Murano Z52
Is it possible to install wipers 700 mm long instead of 650 mm on the Murano Z52?
No, this will lead to several problems:
- The brush will touch the plastic casing under the hood.
- The load on the windshield wiper motor will increase, which will reduce its service life.
- In extreme positions, the wiper can catch the edge of the glass, leaving scratches.
The maximum allowable size for the left brush is 670 mm, but this is not recommended either.
How often do you need to change wipers on a Murano Z52?
Service life depends on operating conditions:
- Standard terms (city, temperate climate): once every 12 months.
- Aggressive exploitation (frequent rains, frosts, sand): once every 6–8 months.
- Premium brushes (silicone, for example, Valeo Silencio): up to 2 years.
Signs of wear: streaks on the glass, squeaking, uneven fit.
Will wipers from Nissan X-Trail T32 fit Murano Z52?
No, despite the fact that the models are related, they X-Trail T32 other brush sizes:
- Left: 600 mm (versus 650 mm for Murano).
- Right: 400 mm (versus 450 mm).
In addition, the shape of the attachment may vary. Using brushes from X-Trail will lead to poor cleaning of the glass edges.
What to do if the wipers do not adhere to the glass?
The problem could be the following:
- Lever deformation — check if the metal holder is bent.
- Rubber wear — brushes older than 1 year lose their elasticity.
- Glass contamination — resins and wax interfere with tight contact.
- Incorrect installation — the left and right brushes are mixed up.
Solution: Clean the glass white spirit, check the fastening, replace the brushes if necessary.
Can frameless wipers be installed on the Murano Z52?
Yes, but with reservations:
- 🔹 Frameless brushes (for example, Bosch Flat Blade) are lighter and flow better with air, but...
- 🔹 ...they cope worse with heavy snow or ice.
- 🔹 It is important to choose a model with reinforced frame (For example, Valeo Ultimate), otherwise the brush will “fly off” at high speed.
For Russian conditions, it is better to combine: frameless in summer, framed in winter.
For Nissan Murano Z52, it is critical to observe the brush sizes (650/450 mm) and the type of fastening (J-hook). Even a slight deviation will lead to poor cleaning or damage to the mechanism.