Laptop HP 250 G6 is a popular model in the budget segment, known for its reliability and ease of maintenance. However, even such equipment requires periodic cleaning, replacing thermal paste or upgrading components. If you're experiencing overheating, slow performance, or want to install more RAM, disassembling the case is the first step.

In this article you will find step by step instructions taking into account design features HP 250 G6including hidden latches, screw locations, and potential pitfalls. We'll also look at which tools are really necessary and which you can do without, and give safety recommendations - from static electricity to proper removal of cables.

Important: disassembling the laptop voids manufacturer's warrantyif it is still in effect. Make sure you are ready for this step or contact your service center. If the warranty period has expired, our instructions will help you save on repairs and do everything yourself.

Preparing for Disassembly: Tools and Safety Precautions

Before you start disassembling HP 250 G6, prepare a workplace and the necessary tools. This will not only speed up the process, but also minimize the risk of component damage. Here's what you'll need:

  • 🔧 Screwdriver set: cross (PH0 or PH1) and flat (for prying latches). Preferably with a magnetic tip - the screws in laptops are small and easily lost.
  • 🧲 Antistatic wrist strap or at least touching a grounded object (for example, a radiator) before work. Static electricity can damage the motherboard.
  • 📦 Containers for screws: Use small containers or a magnetic backing to avoid mixing up the fasteners during assembly.
  • 📸 Smartphone for photography: fix the location of the cables and modules before disconnecting. This will save you from errors during reassembly.

Also prepare plastic spatula (mediator) or a special tool for separating the case - it will help you carefully release the latches without damaging the plastic. If you don't have such a tool, you can use old bank card, but you need to act extremely carefully.

⚠️ Attention: Do not use metal objects (knives, screwdrivers) to disconnect the housing! This can lead to chipped plastic or shorted contacts on the motherboard.

Work for flat, stable surface with good lighting. A table with a white tablecloth is ideal - it will make it easier to spot fallen screws. If you are disassembling a laptop for the first time, watch disassembly video reviews in advance HP 250 G6 on YouTube to visually represent the process.

📊 Have you ever disassembled a laptop yourself?
  • Yes, repeatedly
  • Yes, but only for cleaning
  • No, this is my first experience
  • I prefer to contact the service

Removing the back cover: hidden latches and procedure

The first step is to remove the back cover. B HP 250 G6 it is attached to 8 screws (see photo below for their location) and several plastic latches. It is important to unscrew the screws in the correct order and not to use excessive force when removing the cover.

Start with removing the battery (if it is removable). In this model, the battery is usually secured with two latches - slide them to the sides and carefully remove the battery. If the battery is non-removable (in some versions G6), skip this step, but be sure to unplug the laptop and hold down the power button for 10 seconds to discharge the capacitors.

Next, unscrew all the screws on the back cover. Please note: two screws under the rubber feet - they're easy to miss! Carefully pry up the legs with a flathead screwdriver and unscrew the hidden fasteners. After this, turn the laptop over and begin to separate the cover, starting with corner near the keyboard:

Turn off power and remove battery|

Unscrew all 8 screws (including those hidden under the legs)|

Use a plastic spatula to pry the cover off the keyboard|

Gradually release the latches around the perimeter (do not pull sharply!) |

Lift the lid and set aside -->

Screw type Quantity Size(mm) Location
Cross (PH0) 6 3–4 Along the perimeter of the lid
Cross (PH0) 2 5 Under rubber feet
Flat (for latches) — — Used to separate the housing

If the lid does not budge, do not force it - most likely you have missed the latch. Use a spatula to move around the entire perimeter, listening for clicks. B HP 250 G6 the most “stubborn” latches are located near USB ports And vent.

💡

If the cover pops when removed, stop trying and check all screws again. The plastic in budget HP models is fragile and easy to break.

Component extraction: what can be upgraded

After removing the cover, you will have access to the main components of the laptop. B HP 250 G6 The user can independently replace or update the following parts:

  • 🖥️ Random access memory (RAM): model supports up to 16 GB DDR4 (2 slots). The original configuration often comes with 4 GB or 8 GB.
  • 💾 Hard disk drive (HDD) or SSD: standard form factor 2.5" (SATA III). You can install an SSD to speed up the system.
  • 🔋 Battery (if non-removable): in some modifications G6 The battery is soldered to the motherboard - replacement requires soldering.
  • 🌡️ Cooling system: The fan and radiator can be cleaned of dust or the thermal paste can be replaced.

To extract RAM, carefully release the latches on the sides of the module - it will rise at an angle 30–45°. Remove the bar by holding the edges without touching the contacts. To install a new module, insert it into the slot at the same angle and press until it clicks.

Replacement HDD to SSD requires system migration. To do this you can use the program Macrium Reflect or Clonezilla. Don't forget disconnect power and data cable Before removing the drive, pull the plastic tab, not the wires!

⚠️ Attention: In some versions HP 250 G6 The hard drive is not mounted on standard screws, but on rubber shock absorbers. Don't lose them when replacing them!

If you are planning cleaning the cooling system, remove the fan (by unscrewing 3-4 screws) and the radiator. Remove thermal paste on the processor and chipset cloth soaked in isopropyl alcohol. The new paste is applied in a thin layer - excess can lead to overheating.

How to transfer Windows to a new SSD?

1. Connect the new SSD via USB adapter.

2. Use Macrium Reflect Free to clone the disk (select the "Clone this disk" option).

3. After cloning, replace the HDD with SSD in the laptop.

4. Boot from the new disk and check the system's functionality.

If Windows does not start, repair the bootloader via command line (commands: bootrec /fixmbr, bootrec /fixboot).

Disassembling the keyboard and top panel: difficult moments

If you need to get to screen cablespeakers or webcam, you will need to remove the keyboard and top panel. B HP 250 G6 This process is more complicated than removing the back cover and requires special care.

Start with disconnecting the keyboard cable. It is located under a small plastic cover (fixed with a latch) and connected to the motherboard ZIF connector (with lift-up lock). Carefully lift the retainer with a flat-head screwdriver and remove the cable.

Next, unscrew the screws that secure the keyboard (usually 3-4 pieces under the top cover). Pry up the keyboard with a plastic spatula, starting at upper right corner. Be careful - there may be additional cables under the keys (for example, for touchpad).

After removing the keyboard you will have access to:

  • 🔊 Speakers (attached with 2 screws each).
  • 📹 Webcam (the cable is often glued to the body - do not jerk sharply!).
  • 🖱️ Touchpad (disconnect the cable before removing).
⚠️ Attention: B HP 250 G6 The touchpad cable runs under the motherboard. If you do not plan to remove it, do not pull out the cable completely - just disconnect the connector.

To completely disassemble the top panel, you will need to unscrew the screws around the screen hinges and carefully separate it from the base. The main thing here is not to damage matrix cable, which goes through the loop. If you are not confident in your abilities, it is better to stop at this stage and not take risks.

💡

The keyboard cable in the HP 250 G6 is fragile - replacing it will cost 30-50% of the cost of a new laptop. Proceed with extreme caution!

Cleaning the cooling system: step-by-step process

Overheating is one of the most common problems HP 250 G6, especially during intense work. To clean the cooling system, follow these steps:

  1. Remove the back cover (as described above).
  2. Disable fan cable from the motherboard (usually it is signed FAN).
  3. Unscrew the screws securing the radiator and fan (3-4 pieces). In some modifications, the heatsink is attached to the processor through spring struts - don't lose them!
  4. Carefully remove the radiator. If the thermal paste is “stuck”, do not tear it off by force - heat it with a hairdryer at minimum temperature (or wait 5–10 minutes until it softens).

For cleaning use:

  • 🧹 Soft brush (for example, for drawing) - to remove dust from the fan blades.
  • 💨 Can of compressed air - for blowing dust out of the radiator. Hold the fan blades with your hand to prevent them from rotating due to the air flow.
  • 🧴 Isopropyl alcohol (70% or higher) — for cleaning contacts and removing old thermal paste.

Apply new thermal paste thin layer (about the size of a grain of rice). Excess paste may leak onto the motherboard and cause a short circuit. For even distribution you can use plastic card.

After cleaning, reassemble the cooling system in reverse order. Make sure the fan rotates freely - if it is clinging to the wires, check cable laying (sometimes it moves during assembly).

💡

If after cleaning the laptop still heats up, check the operation of the fan in the BIOS (section Hardware Monitor). If the rpm is 0, the cooler itself or its controller on the board may have failed.

Common mistakes and how to avoid them

Even experienced users sometimes make mistakes when disassembling HP 250 G6. Here are the most common ones and how to prevent them:

Error Consequences How to avoid
Using metal tools to open the housing Chips of plastic, scratches, shorted contacts Use only plastic paddles or picks
Applying force when removing the cover Broken latches, cracks in the case Check all screws, carefully move around the perimeter with a spatula
Forgetting to disconnect the battery before work Short circuit, motherboard failure Always remove the battery or turn off the power for 10+ seconds
Incorrect connection of cables Keyboard, touchpad or screen not working Take photographs of the location of the loops before disconnecting

Another common problem is tightening screws during assembly. B HP 250 G6 The threads in plastic inserts are easily torn off, especially if the screw is screwed in at an angle. Tighten fasteners criss-cross (like a car wheel) to distribute the pressure evenly.

If the laptop does not turn on after assembly, check:

  • 🔌 Connection power cable to the motherboard (sometimes it comes off during transportation).
  • 🔋 Correct installation RAM (the strips must be inserted until they click).
  • 🌡️ Quality of application thermal paste (overheating may block starting).

If the problem persists, try starting the laptop without the battery connected (only from the power supply). This will help rule out battery failure.

FAQ: answers to frequently asked questions

Is it possible to replace the processor in HP 250 G6?

Technically yes, but with caveats. Laptop supports processors Intel Core i3/i5/i7 7th generation (Socket BGA 1356), but:

  • Processor soldered to the motherboard - replacement requires soldering and specialized equipment.
  • Even if you replace the CPU, you may need to update the BIOS (risk of bricking the board).
  • The performance gains often don't justify the costs - it's cheaper to buy a new laptop.
How to check that the laptop is properly disassembled before turning it on?

Before turning on for the first time after assembly:

  1. Make sure everything the screws are tightened (but not overtightened).
  2. Check connection of loops - they should fit tightly, without distortion.
  3. Inspect RAM and SSD contacts — there should be no dust or traces of corrosion on them.
  4. Connect the power supply and check charging indicators (should light up).

If your laptop won't turn on, unplug it and check connecting the power button (the train may come off).

What should I do if after cleaning the fan becomes noisier?

Possible causes and solutions:

  • 🔧 Unbalanced blades: Check if they are bent. If yes, replace the fan.
  • 🧴 Thermal paste on the radiator: Remove excess with alcohol.
  • 🔌 Incorrect cable connection: Make sure the fan connector is firmly seated in the connector FAN on the board.
  • 🌡️ Dust in the bearing: add 1 drop machine oil (not WD-40!) into the center of the fan and twist the blades by hand.
Where to buy spare parts for HP 250 G6?

Original and compatible components can be found:

  • 🛒 AliExpress - cheapest, but long wait (look for sellers with a rating of 98%+).
  • 🏬 Local service centers — they often sell used parts from disassembly.
  • 🌍 eBay - a good choice for SSD, RAM and batteries.
  • 🏢 Official HP partners - original parts, but at a high price.

Please check when purchasing exact modification your HP 250 G6 (For example, HP 250 G6 (4XW54EA)), as components may vary.