Selection of rims for Nissan Qashqai 2017 is a task that requires precision. An error in the bolt pattern parameters can lead to vibrations, premature wear of the suspension, or even an emergency. In this article we will look at all the key characteristics: PCD, ET, hub diameter (DIA), as well as permissible wheel and tire sizes for different trim levels.

Feature Kashkaya second generation (J11) in that its bolt pattern is unified with other models Nissan And Renault. This expands the choice of disks, but requires careful selection. We have collected current data from official manuals and tuning practices so that you can avoid mistakes.

What is a bolt pattern and why is it important for the 2017 Nissan Qashqai

Term bolt pattern (or PCD - Pitch Circle Diameter) indicates the diameter of the circle on which the disc mounting holes are located. For Nissan Qashqai 2017 this parameter is fixed: 5×114.3 mm. This means that the disc is secured with five bolts located on a circle with a diameter of 114.3 mm.

Why is this critical? PCD non-compliance leads to:

  • 🔧 Uneven disc fit — even a minimal deviation (1–2 mm) causes wheel runout.
  • 🚗 Damage to the hub — when moving, the bolts “break” the mounting holes.
  • ⚠️ Loss of warranty - dealers Nissan they refuse to provide warranty repairs to the suspension in case of abnormal bolt patterns.

In addition to PCD, other parameters are also important:

  • 📏 ET (departure) — the distance from the mating plane of the disk to its center. For Qashqai 2017 varies from +38 to +45 mm.
  • ⭕ DIA (center hole diameter) - must be at least 66.1 mm, otherwise the disc will not fit on the hub.
📊 How do you choose wheels for your car?
  • According to parameters from the manufacturer's table
  • I consult with a tire specialist
  • I buy those that I like in appearance
  • I use online compatibility calculators

Official bolt pattern parameters for all trim levels

Regardless of the engine (1.2 DIG-T, 1.6 dCi or 2.0) and drive (front or all-wheel drive) 4WD), bolt pattern Nissan Qashqai 2017 remains unchanged. Below is a table with acceptable values for original and compatible drives:

Parameter Meaning Permissible deviations
PCD (bolt pattern) 5×114.3 mm Exact match only
ET (departure) +38…+45 mm ±2 mm (when using spacers)
DIA (hub diameter) 66.1 mm Discs with larger DIA are allowed (adapter rings are used)
Mounting bolt thread M12×1.25 Only original thread
Bolt torque 90–110 Nm Retightening leads to thread cutting

Important: for versions with all-wheel drive (4WD) departure allowed ET +40…+42 mm, since their wheelbase width is 10–15 mm larger. Exceeding this range leads to the disc hitting the suspension elements when the steering wheel is turned completely.

⚠️ Attention: Discs with offset ET < +35 mm increase the load on wheel bearings and reduce their service life by 30–40%. This is true for tuned versions with an extended track.

Compatible with other Nissan and Renault models

Thanks to the unification of the platform CMF-C/D, bolt pattern Qashqai 2017 coincides with other alliance models Renault-Nissan. This allows you to expand your choice of drives without the risk of incompatibility. Full list of compatible cars:

  • 🚘 Nissan X-Trail (T32, 2014–2021)
  • 🚘 Renault Kadjar (2015–2022)
  • 🚘 Renault Koleos (2016–2023)
  • 🚘 Nissan Rogue (for American market)
  • 🚘 Infiniti QX30 (2016–2019)

However, there are nuances:

  • 🔹 Discs from X-Trail may have ET +40…+48 mm - for Qashqai Only those that fit into the range +38…+45 mm are suitable.
  • 🔹 Renault Kadjar often comes with disks DIA 66.6 mm - they can be installed on Qashqai without adapter rings.
💡

When purchasing used wheels from compatible models, check the condition of the bolt threads. Corrosion or breakage of the turns renders the disc unsuitable for use.

How to measure bolt pattern yourself

If you are in doubt about the parameters of a disk (for example, when purchasing second-hand), you can measure the bolt pattern yourself. You will need:

  • 📏 Caliper or ruler with high accuracy.
  • 🔧 Wheel removal key.
  • 📐 Protractor (optional, to check alignment).

PCD measurement algorithm:

  1. Remove the wheel and clean the hub from dirt.
  2. Measure the distance between the centers of two adjacent holes (for example, A).
  3. Multiply the result by a factor of 1.051 (for 5 bolts): PCD = A × 1.051.

Example: if the distance between holes 71.5 mm, then PCD = 71.5 × 1.051 ≈ 75.1 mm. This doesn't match 114.3 mm - the disk does not fit.

☑️ Check the disc before purchasing

Done: 0 / 4

Tire selection: sizes and recommendations for Qashqai 2017

The bolt pattern determines wheel-hub compatibility, but choosing the right tires is equally important. The manufacturer recommends the following sizes for Nissan Qashqai 2017:

Disk size Recommended tire size Valid Alternative
17″ 215/65 R17 225/60 R17 (increases ground clearance by 5 mm)
18″ 225/55 R18 235/50 R18 (only for all-wheel drive versions)
19″ 225/45 R19 235/40 R19 (reduces ground clearance by 8 mm)

When choosing tires, consider:

  • 🔄 Load Index - for Qashqai minimum indicator 91T (615 kg per wheel).
  • ❄️ Seasonality - winter tires must be marked 3PMSF (snowflake symbol).
  • 💨 Production date — tires older than 5 years lose elasticity even with minimal mileage.
⚠️ Attention: Installing tires with a diameter different from the standard one distorts the speedometer readings. For example, 235/50 R18 instead of 225/55 R18 reduces the speed by 2–3 km/h.
What happens if you install tires with a larger diameter?

An increase in the outer diameter of the wheel leads to an increase in the load on the transmission and an increase in fuel consumption by 3–5%. The ESP system may also be triggered due to a mismatch in wheel speeds.

Common mistakes when selecting disks and how to avoid them

Even experienced car owners make mistakes when choosing wheels. Here are the most common:

  1. Ignore departure (ET) - disks with ET +30 visually look aggressive, but overload the wheel bearings. Symptoms: hum at speeds of 60–80 km/h.
  2. Buying disks with DIA 57.1 mm - these are often found on the secondary market (for example, from VW), but are not suitable for Qashqai without adapter rings.
  3. Saving on bolts — the use of old or cheap bolts leads to self-unscrewing on the move.

How to avoid problems:

  • 🔍 Check disks for wheel-size.com — the service shows compatibility by VIN or model.
  • 🛒 Buy bolts and nuts complete with disks (original art. 40520-4M000 for Nissan).
  • ⚖️Balance the wheels after installation - an imbalance of more than 15 g causes the steering wheel to vibrate at speeds of 100+ km/h.
💡

Wheels with an ET offset of +45 mm or more are only suitable for front-wheel drive versions. On all-wheel drive vehicles they touch the elements of the braking system.

Tuning and non-standard sizes: what is acceptable

Many owners Qashqai strive to stand out by installing wheels with a larger diameter or with an aggressive offset. However, not all modifications are safe. Valid options:

  • 🔥 Wheels 20″ - can be installed with tires 245/40 R20, but required:
    • Reducing ET to +35 mm (using spacers).
    • Replacing shock absorbers with shortened ones (for example, Bilstein B4).
  • 🔄 Widening the track - disks with ET +20…+30 are installed with spacers, but require rolling out the arches.

Prohibited modifications:

  • ❌ Discs with PCD 5×112 (from Audi/VW) - even with adapters, they do not provide reliable fastening.
  • ❌ Tires wider than 245 mm — they touch the fender liners when the steering wheel is turned completely.

Example of successful tuning:

Диски: 19×8.5J ET+35 (марка Ronal R51)

Шины: 235/35 R19 (Michelin Pilot Sport 4)


Проставки: 15 мм (Hubcentric)


Модификации: раскатка задних арок на 20 мм

FAQ: Answers to frequently asked questions

Is it possible to install wheels with a 5x112 bolt pattern on a Qashqai 2017?

No. Despite the close value (112 vs 114.3 mm), the difference of 2.3 mm leads to uneven tightening of the bolts. This causes vibrations and accelerated wear of the hubs. The only solution is to use eccentric spacers, but they reduce the reliability of fastening.

What is the bolt torque for Qashqai 2017?

Official meaning - 100 Nm. Use a torque wrench because:

  • Under-tightening (<90 Nm) leads to self-loosening of the bolts.
  • Over-tightening (>110 Nm) cuts the threads in the hub.
Is it possible to use wheels from Nissan X-Trail without modifications?

Yes, but with reservations:

  • Suitable discs with ET +40…+42 mm And DIA 66.1 mm.
  • Discs from X-Trail with ET +48 will require spacers 8–10 mm thick.
  • Please check compatibility before purchasing VIN on the website Nissan.
Which tires are better for winter: 215/65 R17 or 225/60 R17?

Optimal choice - 215/65 R17, because:

  • A higher profile (65 instead of 60) improves shock absorption over bumps.
  • A narrower wheel (<225 mm) “cuts” into the snow more effectively.
  • Lighter tire weight reduces the load on the suspension.

The exception is regions with frequent thaws, where a wider wheel (>225 mm) drains water better.

What should I do if vibration appears after replacing the disks?

Causes and solutions:

  1. Wheel imbalance — carry out balancing on a stand with laser alignment.
  2. PCD mismatch — check the bolt pattern again (even 1 mm deviation is critical).
  3. Warped disc - Inspect for cracks or dents (especially after falling into a hole).
  4. Suspension wear — vibration may appear due to broken silent blocks or ball joints.