Owners Nissan Tiida (first and second generation, known as J10 And J11) sooner or later they face the need to check or replace fuses. Electrical equipment failure - be it non-working headlights, power windows or cigarette lighter - in 80% of cases is associated with a blown fuse. However, it can be difficult to find an exact pinout diagram for a specific configuration: official manuals often contain generalized data, and the inscriptions on the block covers are erased over time.
This article will help you understand where are the fuse boxes located in Tiida (including restyled versions 2010–2015), how to decipher their purpose and what nuances are important to consider when replacing. We have collected current diagrams for all modifications - from basic 1.5 MT to top 1.8 AT with climate control, and also added practical tips for diagnosing faults. If you are looking for an answer to the question “why does the radio not work” or “where is the fuse for the cigarette lighter”, you have come to the right place.
Where are the fuse boxes located in Nissan Tiida
B Nissan Tiida provided two main fuse boxes:
- 🔧 Salon block — located to the left of the steering column, behind the plastic cover. To gain access, you need to turn the three latches 90° counterclockwise.
- 🚗 Engine compartment block — located next to the battery, in a plastic box with a black lid. On some versions the cover may be grey.
Additionally in Tiida There is mini relay block (located next to the interior fuse box) and main relay fuse (located under the hood, next to the engine control unit). Important: on vehicles with ABS And ESP There may be a separate fuse box for these systems - it is usually mounted under a plastic cover in the area of the pedal assembly.
There are diagrams with symbols on the covers of the blocks, but they are often not readable due to dust or faded paint. Below we provide current diagrams for all versions Tiida, including export modifications (for example, for markets Latin America or Middle East, where the pinout may differ).
- J10 (2004–2010)
- J11 (2010–2015)
- Restyling 2013–2015
- I don't know
Interior fuse box diagram (J10/J11)
The passenger compartment contains fuses for most electrical consumers in the vehicle. Below is a universal diagram relevant for Nissan Tiida all years of manufacture. Please note: fuse numbers may be duplicated in different modifications, but they are rating (amps) and purpose remain unchanged.
| Fuse no. | Rating (A) | Purpose | Note |
|---|---|---|---|
| 1 | 10 | Audio system, navigation | Also responsible for USB-port and Aux |
| 7 | 15 | Cigarette lighter | Often burns out when using powerful devices (for example, compressors) |
| 10 | 10 | Low beam (right headlight) | If burnt out, check the lamp and contacts |
| 15 | 10 | High beam (left headlight) | — |
| 20 | 7.5 | Dashboard lighting | If the backlight does not work, also check relay No. 5 in the same block |
The complete diagram of the interior unit can be downloaded here (PDF, 1.2 MB). If your fuse is not listed in the table, check it by the number on the block cover - sometimes the manufacturer makes changes to the pinout for specific markets (for example, for Tiida right-hand drive).
⚠️ Attention: fuse №25 (10A) is responsible for ECU (engine control unit). Replacing it with the ignition on can lead to reset of adaptations and errors in engine operation. Always disconnect the negative terminal of the battery before replacing!
Underhood fuse box: purpose and features
Engine compartment block Nissan Tiida contains fuses for high-voltage circuits: starter, generator, injection system, etc. Also located here main relay and fuses for ABS/ESP (if they are included in the package). A special feature of this unit is the use of fuses like «maxi-fuse» (large size) with denomination from 20A to 100A.
The most “problematic” fuses in the engine compartment:
- ⚡ 30A (fuse #3) — responsible for the cooling fan. If it burns out, the engine will overheat.
- ⚡ 50A (fuse #7) - generator circuit. If it burns out, the battery will not charge.
- ⚡ 15A (fuse #10) — fuel pump. If it fails, the engine will not start.
To get to the engine compartment, follow these steps:
Open the hood and secure it|Remove the negative terminal from the battery|Press the two plastic clips on the unit cover|Lift the cover up (it is attached to a hinge)|Check the integrity of the fuses visually or with a multimeter-->
Important: fuse No. 8 (100A) in the engine compartment is responsible for the generator and starter circuit. Replacing it requires a mandatory check of the condition of the battery and wiring - most often it burns out due to a short circuit in the ground-generator circuit.
If a fuse blows again after replacement, do not install a fuse of a higher rating! This may cause the wiring to catch fire. Instead, test the circuit for short circuits using a multimeter in test mode.
How to check and replace a fuse: step-by-step instructions
Replacing the fuse in Nissan Tiida does not require special skills, but there are several nuances that will help you avoid mistakes:
- Turn off the power. Always remove the negative terminal from the battery before working on fuses, especially when dealing with circuits
ECUorABS. - Use tweezers. The fuses are tightly packed in the interior block - it is inconvenient to remove them with your hands. The car should come with plastic tweezers (usually red).
- Check visually and with a multimeter. A blown fuse can be identified by a broken thread inside. However, sometimes the break is not visible - in this case, check the circuit with a multimeter in the
200Ω. - Install a fuse of the same rating. Using a high ampere fuse may cause a fire!
If the fuse blows again after replacement, this indicates short circuit in the chain. In this case:
- 🔍 Check the wiring for damage to the insulation (especially at kinks or near moving parts).
- 🔧 Disconnect consumers one by one to identify the problem node.
- 📊 Test the circuit with a multimeter from the fuse to the consumer.
What to do if the fuse melts?
If the fuse not only blows, but also melts the plastic housing, this is a sign of a serious short circuit or exceeding the rated current in the circuit. In this case:
1. Do not install a new fuse until the cause is eliminated!
2. Check all connectors and contacts in the circuit for oxidation or burning.
3. If the problem is in the wiring, replace the damaged section or contact an auto electrician.
4. As a last resort, you can temporarily install a fuse one rating higher (for example, instead of 10A - 15A), but only in order to get to the service station!
Common problems and their solutions
Owners Nissan Tiida often encounter typical faults related to fuses. Here are the most common cases and ways to eliminate them:
| Problem | Possible fuse | Additional checks |
|---|---|---|
| Cigarette lighter doesn't work | No. 7 (15A, salon unit) | Check the cigarette lighter socket for foreign objects or oxidation of the contacts |
| Power windows don't work | No. 22 (20A, salon unit) | Check the power window relay (located next to the fuse box) |
| Headlights do not light (low/high beam) | No. 10, No. 15 (10A, cabin unit) | Check the lamps, light relay (No. 3 in the interior unit) and contacts in the headlight unit |
| The radio doesn't work | No. 1 (10A, salon unit) | Check the radio connectors for oxidation (especially if it was turned off when replacing the battery) |
If the problem is not solved by replacing the fuse, the cause may be:
- 🔌 Relay — check its functionality (you can temporarily replace it with a known good one from another slot).
- 🔋 Poor contact - oxidation or loose terminals in the fuse box.
- 📉 Voltage drop - Check the battery and generator.
⚠️ Attention: If in Tiida several systems stopped working at once (for example, lights and power windows), the problem may be main fuse under the hood (100A) or in the relay box. Don't ignore this - this behavior often indicates serious wiring or ground problems!
Differences in pinout for different markets and configurations
Nissan Tiida was supplied to different markets, and depending on the country of destination, the pinout of the fuses could change. For example:
- 🌍 In versions for Japan And USA The cigarette lighter fuse is often rated
20A(instead of15Ain European versions). - 🌡️ In cars with
climate controlfuse added №28 (10A) for the climate control unit. - 🚗 In restyled Tiida (2013–2015) fuse №18 (10A) is responsible for the rear view camera (if installed).
To accurately determine your version, pay attention to:
- Year of manufacture and VIN number (you can use it to find the exact diagram for your car).
- Availability of additional equipment (for example,
ESP,xenon,heated seats). - The market for which the car was produced (this can be identified by the sticker on the driver's door).
If your equipment is rare (for example, Tiida with diesel engine 1.5 dCi), it is better to look for a fuse diagram in the official manual or on specialized forums, such as Nissan Club Russia or Drive2.
Before purchasing fuses, check their size! B Tiida Three types of fuses are used: mini (for the cabin unit), maxi (for the engine compartment) and micro2 (in some restyled versions).
Frequently asked questions about fuses Nissan Tiida
Where is the fuse for the radio?
Radio fuse in Tiida located in the cabin block under number 1 (10A). If the radio does not work after replacing, also check the fuse №2 (10A), which is responsible for the settings memory. In some versions with Bose- the audio system may have an additional fuse in the engine compartment (No. 12, 15A).
Why does the cigarette lighter fuse blow?
Most often this happens due to:
- Using powerful devices (compressors, inverters) with higher current consumption
15A. - Short circuit in the cigarette lighter socket (ingress of metal objects or liquid).
- Poor contact in the connector (oxidation or loose terminals).
Solution: Replace the fuse, check the socket, and use a power strip with its own fuse for high-power devices.
Which fuse controls the starter?
For the starter in Tiida answers fuse No. 8 (100A) in the engine compartment. However, if the starter does not turn, the problem may also be:
- Starter relay (located in the engine compartment).
- Contacts on the starter solenoid relay.
- Battery (low charge or poor terminal contact).
Before replacing the fuse, check the voltage at the battery terminals when attempting to start.
Is it possible to install a fuse of a higher rating?
Absolutely not! Installing a fuse with a rating higher than the rated one can lead to:
- Overheating and melting of wiring.
- Fire of plastic elements of the interior.
- Failure of electronic components (for example,
ECUorBCM).
If a fuse keeps blowing, look for the cause (short circuit or overload) instead of increasing its rating.
Where to find the fuse diagram for your version Tiida?
The diagram can be found:
- On the back of the fuse box cover (if the inscriptions have not been erased).
- In the official manual (section
Fuses and Relays). - On specialized sites, for example:
- Nissan Manuals (search by VIN).
- Fuse-Box.info (base of diagrams for different cars).
If you can’t find a diagram, take a photo of the cover of your unit and ask a question on the forum Nissan Tiida Club — they will help you decipher the purpose of the fuses.