Nissan Tino radio frame: selection, replacement and installation secrets

Nissan Tino - a compact van that is still popular due to its practicality and reliability. But even with such machines, little things wear out over time, for example, radio frame. It may crack from the sun, lose color, or simply get tired of the standard design. In this article, we’ll look at how to choose the right frame, remove the old one and install a new one - without mistakes and unnecessary expenses.

Replacing the frame seems like a simple task, but there are nuances here: from compatibility with the radio model to the mounting method. We have collected all the relevant information, including original frame articles for different years of manufacture Nissan Tino (1999–2006), analogues from third-party manufacturers and step-by-step instructions with photos. You'll also learn how to avoid common problems, such as frames that don't fit tightly or scratches on the panel.

Which radio frames are suitable for Nissan Tino

The first thing to understand is: the framework for Nissan Tino differ depending on the year of manufacture and type of radio. Original parts are produced under article numbers 28253-4M000 (for 1999–2002 models) and 28253-4M001 (2003–2006). However, there are also high-quality analogues on the market from Denso, Pioneer or Alpine, which are often cheaper, but not inferior in quality.

Main selection criteria:

• 🔹 Compatibility by year: Check the VIN or year of manufacture - frames for early and late versions Tino not interchangeable.
• 🔹 Material: The originals are usually made of ABS plastic, analogues can be made of polypropylene (less resistant to UV rays).
• 🔹 Color: Standard colors - black (BK) and gray (GR). For restyled models (2003+) sometimes you come across silver (SV).
• 🔹 Equipment: The kit must contain fastening latches and sealing tape (if not, purchase separately).

If you plan to install a non-standard radio (for example, with a screen 2DIN), will be required frame adapter. For Nissan Tino adapters from Metra (article 99-7303) or Connects2 (article CTNI001). They allow devices to be built in size 1DIN or 2DIN without altering the panel.

Original vs analogues: which is better for Nissan Tino

Original frames from Nissan guarantee a perfect fit and docking with the panel, but their price can be steep - from 3,500 to 6,000 rubles, depending on the supplier. Analogs are cheaper (1,200–2,500 rubles), but it is important not to run into a fake.

Criterion	Original frame	High-quality analogue	Cheap fake
Material	ABS plastic, UV resistant	Polypropylene or ABS	Brittle plastic, turns yellow
Landing	Perfect, no gaps	There may be microgaps (up to 0.5 mm)	Doesn't fit well, wobbles
Color	Exact match to panel	There may be slight tints	A pronounced imbalance
Fastenings	All latches and holes match	1–2 latches may be missing	Fasteners break during installation

If you choose an analogue, pay attention to the manufacturer. Good reviews for frames from:

• 🔧 Denso (items start with 555-) - often delivered to the conveyor.
• 🔧 Pioneer (series DEH) - suitable for radios with a display.
• 🔧 Alpine (ruler INE) - premium quality, but more expensive than analogues.

Step-by-step instructions: how to remove an old frame

To remove the radio frame Nissan Tino, you will need:

• 🔧 Plastic puller or flat screwdriver (wrapped with electrical tape).
• 🔧 Flashlight - lighting will help you see the latches.
• 🔧 Container for small parts (screws, clips).

Sequence of actions:

1. Disconnect the negative terminal of the battery (this is mandatory to avoid a short circuit!).
2. Remove the decorative trim around the radio. It is secured with 4–6 latches around the perimeter. Carefully pry it off with a puller from the lower right corner.
3. Unscrew the screws securing the radio (usually 4 pieces, using a Phillips screwdriver).
4. Pull the radio towards you, but do not disconnect the connectors! First, remove the frame - it is attached to the radio with plastic clips.
5. Press the latches on the inside of the frame (usually there are 2-3) and remove it.

Important nuance: on some versions Nissan Tino the frame can be glued to the panel with double-sided tape. In this case use heat hair dryer (heat on low) to soften the glue.

What to do if the latch is broken?

If the plastic latch breaks when removing the frame, don't panic. It can be temporarily replaced with a small self-tapping screw (3–4 mm) or Moment Plastic glue. However, for reliability, it is better to order a new frame - broken latches will not ensure a tight fit.

Installing a new frame: errors and solutions

Installing a new frame is the reverse process of removing it, but it has its pitfalls. The most common mistakes:

• ❌ Hole misalignment: If the frame does not fit, check its article number. For example, the frame from Nissan Almera N16 Looks similar, but doesn't fit!
• ❌ Distortions: Make sure all latches are locked evenly. If the frame moves to the side, loosen the screws of the radio and adjust the position.
• ❌ Scratches on the panel: Never pull the frame with force - plastic Tino soft and scratches easily. Use a puller!

Step-by-step installation algorithm:

1. Try on a new frame for the radio before connecting the connectors.
2. Attach the frame to the radio, making sure that all the latches click into place.
3. Connect the power connectors and antennas (if you removed the radio completely).
4. Install the radio in the seat and tighten the screws (do not overtighten!).
5. Apply the decorative trim starting from the top edge.

For radios with touch screen (2DIN) the frame may need to be modified. For example, in some adapters you need to cut the plastic from the inside so that the screen does not rest against the panel. Do this carefully with sandpaper (P120–P240).

How to paint a radio frame at home

If your frame has lost its color, but is mechanically intact, it can be restored by painting. Suitable for this:

• 🎨 Spray paint: For example, Motip (article 100 BK for black) or Dupli-Color (series HVP100).
• 🎨 Vinyl film: More durable, but requires care when gluing.
• 🎨 Liquid rubber (For example, Plasti Dip) is a removable coating, but less scratch resistant.

Step-by-step painting instructions:

1. Remove the frame and clean it of dirt (use White spirit or Isopropyl alcohol).
2. Matte the surface with sandpaper (P400–P600) for better adhesion.
3. Apply primer (eg Kudo KU-6001) in 1-2 layers, let dry for 15-20 minutes.
4. Paint the frame in 2-3 thin layers, holding the can at a distance of 20-25 cm. Drying between coats is 10 minutes.
5. Apply varnish (eg Bosny BN-600) for protection against UV rays.

The secret to perfect painting

To avoid drips, paint in a warm room (20–25°C) with a humidity not exceeding 60%. After painting, let the frame dry for 24 hours - only then can it be reinstalled.

If you paint the frame to match the color of the panel, use tinting card for automotive plastics. Color code for Nissan Tino (black): KH3 or Super Black. For gray: KAD (Light Gray).

Where to buy a frame for Nissan Tino: proven options

Buy a radio frame for Nissan Tino It is possible in several places, but not all of them are reliable. Here are the tested options:

Source	Pros	Cons	Average price
Official dealer Nissan	100% original, guaranteed	Long wait (2–4 weeks), expensive	4 000–6 000 ₽
Online stores (AutoDoc, Exist.ru)	Fast delivery, large selection	Risk of running into a fake	1 500–3 500 ₽
Showdown (Avito, Drom.ru)	Cheap, you can bargain	Condition "depends on luck", no guarantee	500–1 500 ₽
Aliexpress	Lowest prices, many options	Long delivery, "pig in a poke" quality	800–2 000 ₽

When purchasing at a disassembly location or Aliexpress Be sure to ask the seller:

• 📸 Photo frames from different angles (especially mounts).
• 📄 Article number or VIN of the donor car.
• 🎥 Installation video (if the seller claims that the frame is “like new”).

Common problems after replacing a frame and how to avoid them

Even if you did everything according to the instructions, troubles may arise. Let's consider some cases and solutions:

⚠️ Attention: If after installing a new frame the backlight of the radio buttons stops working, check the connector connection ILLUMINATION (usually orange wire). It may fall out or oxidize.

Problem 1: The frame does not hold and falls out.

Reasons:

• 🔸 The latches on the frame or radio are broken.
• 🔸 Insufficient landing depth (found in cheap adapters).
• 🔸 There is no sealing tape.

Solution: Use double-sided tape 3M VHB (article 4950) or install additional clips (for example, from an old frame).

Problem 2: Creaks appeared when moving.

Reasons:

• 🔸 The frame rubs against the panel due to a loose fit.
• 🔸 Plastic frames and panels of different types (for example, ABS vs polypropylene).

Solution: Place thin foam rubber or silicone gasket between the frame and the panel. Treating contact surfaces will also help. silicone grease (For example, Liqui Moly Silicon-Fett).

⚠️ Attention: If, after replacing the frame, the radio began to “glitch” (turn on/off on its own), check the ground. Often the problem is an oxidized contact on the body or a weak connection of the radio to the metal base.

FAQ: Answers to frequently asked questions

Is it possible to install a frame from a Nissan Almera N16 on a Tino?

No, the frames are not compatible. U Almera N16 different seat size (width 178 mm vs 182 mm for Tino), and the fastenings do not match. An exception is adapters for non-standard radios (for example, Metra 99-7303), which are universal.

How to remove the frame if all the latches are broken?

If the clamps are broken, carefully drill holes (∅2–3 mm) in the places where the old frame is attached and screw in the screws. An alternative is to use epoxy glue (For example, Poxipol), but this is less reliable.

What is the difference between frames for 1DIN and 2DIN radios?

Frames for 1DIN (height 50 mm) and 2DIN (height 100 mm) have different heights and shapes of fastenings. For Nissan Tino standard radio - 1DIN, but when installing 2DIN-the device will require a frame adapter (for example, Connects2 CTNI001).

Is it possible to paint the frame without removing it from the car?

Technically possible, but not recommended. Paint may get on the panel, radio buttons or connectors. If you still decide to paint on site, seal the adjacent surfaces. masking tape and use paint in a spray can with a fine nozzle.

Where can I find a wiring diagram for the radio after replacing the frame?

Connection diagrams for Nissan Tino can be downloaded from websites CarManualsHub or Nissan-Manuals. Also useful resource PinoutGuide — there is a pinout of connectors by color. For a standard radio, look for a diagram by article number 28250-4M000.