Nissan Cefiro A32 (1994–2003) - a legendary business class sedan that is still in use in many countries. Like any car of considerable age, it requires regular maintenance, including checking electrical circuits. One of the most common problems owners have is burnt out fuses in the cabin, which are responsible for the operation of the dashboard, lighting, audio system and other critical components.

Unlike the engine compartment block, interior fuse box in Cefiro A32 less accessible, and its diagram is often lost or differs depending on the year of manufacture and configuration. In this article you will find current fuse diagram for the interior with explanation of each element, as well as step-by-step instructions for replacing them without the risk of damaging the electrical wiring. We will also analyze typical mistakes that owners make during diagnostics and give recommendations on choosing high-quality fuses.

Where is the fuse box in the passenger compartment? Nissan Cefiro A32?

B Cefiro A32 The interior fuse box is located under the dashboard on the driver's side. The exact location depends on the modification, but in 90% of cases it can be found as follows:

  1. Open the driver's door and sit in the seat.
  2. Lower the steering column to the lowest position for convenience.
  3. Look under the panel to the left of the steering wheel - there you will see plastic cover size approximately 15×10 cm.
  4. The cover is secured with two latches: carefully pry it off with a flat-head screwdriver or your fingers.

In some trim levels (for example, with climate control), the unit may be moved closer to the center console. If you don't find it right away, check the space under the glove compartment — there is sometimes an additional relay block located there.

📊 Where is your fuse box located in the interior of the Cefiro A32?
  • Under the steering wheel on the left
  • Under the glove compartment
  • Next to the gas pedal
  • I don't know, I haven't looked yet
⚠️ Attention: Do not confuse the cabin unit with relay blockwhich is nearby! The relays are cylindrical in shape and marked R1, R2, R3, while fuses are flat elements with a colored plastic base.

Interior fuse diagram Nissan Cefiro A32 (1994–2003)

Below is current scheme for most modifications Cefiro A32, including versions with engines VQ20DE, VQ25DE And VQ30DE. Please note that depending on the year of manufacture and market (Japan, Europe, Middle East), the purpose of some fuses may differ.

Fuse no. Denomination (A) Color Purpose
1 10 Red Interior lighting, glove compartment lighting, trunk lamp
2 10 Red Audio system, antenna, cigarette lighter
5 15 Blue Window lifters (all 4 doors)
10 7.5 Brown Dashboard lighting, brightness control
15 10 Red Engine control unit (ECU), immobilizer

The complete diagram for your modification can be found at back side of the block cover or in repair manual (section Fuse and Relay Box). If the cover is missing or the inscription has been erased, download official manual (in English) or use database Fuse-Box.info.

What to do if the diagram on the cover does not match reality?

If the inscriptions on the block cover do not correspond to the actual purpose of the fuses, this may mean that:

1. The car was restyled (for example, after 1998).

2. The previous owner made changes to the electrical wiring (for example, installed an alarm or additional equipment).

3. The fuse box was replaced with a non-original one.

In this case, the only reliable way is test the circuits with a multimeter or contact an electrician with experience working on Japanese cars.

How to check the fuse in Nissan Cefiro A32 without a tester?

If you don't have a multimeter handy, you can check the fuse visually or using a simple light bulb. Here are the step-by-step instructions:

Remove the fuse with tweezers (usually it is built into the block cover)

Shine a flashlight on the metal jumper - if it torn, the fuse is blown

Insert new fuse same denomination

If the new fuse immediately blows, look for a short circuit in the circuit -->

To check using a light bulb (for example, from dimensions), follow these steps:

  1. Connect one wire of the light bulb to mass (any metal part of the body).
  2. Connect the second wire to one fuse contact.
  3. If the light comes on, the fuse is good. If not, replacement is required.
⚠️ Attention: Never use fuses with overvalued (for example, 20A instead of 10A)! This may lead to fire in the wiring or failure of electronic components.

Typical problems with fuses in Cefiro A32 and their reasons

Owners Nissan Cefiro A32 often encounter repeated blown fuses. Here are the most common causes and how to eliminate them:

  • 🔋 Short circuit in wiring - most often occurs in doorways (due to chafing of wires) or under the hood (from vibration). Check the insulation visually or using a megohmmeter.
  • 💡 Circuit overload - for example, when installing a powerful audio system or additional LED lamps. Solution: Divide the load into multiple circuits or use a relay.
  • 🚗 Oxidation of contacts — over time, the contacts in the fuse box become coated, which leads to poor contact and overheating. Clean them up alcohol solution or special contact liquid.
  • Consumer fault - if the fuse is responsible for the power windows and is constantly on, the problem may be window lift motor (wear of brushes or jamming of the mechanism).
💡

If a fuse blows immediately after replacement, do not rush to install the next one! First, disconnect all consumers in this circuit (for example, remove the cigarette lighter fuse and disconnect the audio system) and check the circuit for a short circuit.

Pay special attention to the fuse No. 15 (10A)who is responsible for ECU. Its burnout can lead to engine failure or errors in the transmission. If this fuse blows regularly, check:

  • Condition of the battery terminals (oxidation or poor contact).
  • Wiring integrity from ECU to the fuse block.
  • Presence of moisture in the block ECU (a common problem after washing the engine).

How to replace a fuse in the passenger compartment Nissan Cefiro A32: step by step instructions

Replacing a fuse is a simple procedure, but requires care. Follow these instructions to avoid errors:

  1. Turn off the ignition and remove the key from the lock. This will prevent a short circuit when removing the fuse.
  2. Remove the fuse box cover (as described above).
  3. Find the blown fuse using the diagram or visually (a blown jumper will be visible to the naked eye).
  4. Remove the fuse plastic tweezers (metal tools can damage the contacts!).
  5. Insert new fuse same denomination. If you don’t have the original one on hand, you can temporarily use a fuse from another circuit (for example, from the trunk light), but only if their ratings match!
  6. Replace the cover and check the operation of the equipment.

1. Serviceability of the consumer itself (for example, a light bulb or window lift motor).

2. Presence of voltage at the fuse contacts (should be ~12V when the ignition is on).

3. Integrity of wiring from the fuse box to the consumer.-->

If you are replacing a fuse for the first time, we recommend taking a photo of the block before removing the elements - this will help to avoid mixing them up. Also note fuse color: It corresponds to the rating (for example, red is 10A, blue is 15A).

What fuses to buy for Nissan Cefiro A32?

For Cefiro A32 standard ones fit blade fuses type ATO/ATC (size: 19×5×18.5 mm). However, not all fuses are equal in quality. Here's what to consider when purchasing:

  • 🏭 Manufacturer: Give preference to brands Littlefuse, Bussmann or Hella. They guarantee exact compliance with the nominal value and resistance to corrosion.
  • 🔍 Contact material: Cheap fuses use steel instead of copper, which leads to oxidation. Check that the contacts are copper or tinned.
  • 📦 Completeness: Buy a set of fuses of different ratings (from 5A to 30A) - this will save time in the future.
  • 🛡️ Anti-counterfeit protection: Original fuses have the manufacturer's logo and rating markings stamped on the plastic (not painted).

Avoid fuses without markings or with blurred inscriptions - this is a sign of a fake. Also, do not use so-called "bugs"(homemade wire jumpers) - they can cause a fire!

⚠️ Attention: B Nissan Cefiro A32 with engines VQ30DE (3.0L) fuse No. 20 (15A) is responsible for the fuel pump. Replacing it with a fuse with an overrated rating may result in pump overheating and its failure!

Frequently asked questions about fuses in Nissan Cefiro A32

Can fuses from other cars be used?

Yes, if they meet the standard ATO/ATC and have the same denomination. However, please note that some vehicles (eg. Toyota or Honda) type fuses can be used Mini or Maxiwhich are not suitable for Cefiro A32.

Why does the cigarette lighter fuse keep blowing?

This is a typical problem when connecting powerful consumers (for example, a compressor for inflating tires or a 12V→220V inverter). Solution:

  • Use the cigarette lighter only for normal purposes (phone charging, GPS).
  • Install an additional fuse rated 20A into the cigarette lighter circuit (the wiring will need modification).
  • Check the cigarette lighter contacts for oxidation - they can overheat and cause burnout.
Which fuse controls the low beam?

B Cefiro A32 are responsible for the low beam two fuses:

  • No. 7 (10A) - left headlight.
  • No. 8 (10A) - right headlight.

If the light does not come on after replacing the fuses, check low beam relay (located in the engine compartment) and lamps.

What to do if the ECU fuse is blown?

Fuse blown No. 15 (10A) may lead to:

  • Engine start failure.
  • When an error appears Check Engine.
  • Unstable operation of the automatic transmission.

Before replacing the fuse:

  1. Check the voltage at the terminals ECU (should be ~12V when the ignition is on).
  2. Inspect the block ECU for moisture or corrosion.
  3. If the fuse burns repeatedly, contact a diagnostician to check the power circuit ECU.
Where to buy original fuses for Cefiro A32?

Original fuses Nissan can be purchased:

  • In official dealer centers (article: 24060-4M000 for dialing).
  • In online stores (Exist.ru, Autodoc, Emex).
  • In auto electrical stores (for example, Chip and Dip).

The cost of a set of 10 fuses is from 300 to 800 rubles, depending on the brand.