Owners Nissan Qashqai J11 (2013–2021 model year) sooner or later you have to face the need to check or replace fuses. These small but critical elements protect the vehicle's electrical circuits from overloads and short circuits. Without them, even a minor wiring fault can destroy expensive equipment - from headlights to the engine control unit.

Unlike previous generations, Qashqai J11 has two main fuse boxes: one is located in the cabin (behind the glove compartment), the other is under the hood (next to the battery). Their diagrams differ depending on the configuration and year of manufacture, which often causes confusion. In this article we will look at exact locations of the blocks, we will provide current diagrams with decoding for different versions of J11, and also give practical advice on diagnostics and replacement.

Where are the fuse boxes in the Nissan Qashqai J11

B Nissan Qashqai J11 There are two fuse blocks, and their location depends on the vehicle modification. It is important to know that in restyled versions (from 2017) the layout may differ slightly, but there are no fundamental changes.

1. Salon block (main):

  • 📍 Located behind the glove compartment (glove box) on the driver's side.
  • 🔧 To gain access, you need to open the glove compartment, press the latches on the sides and lower it down.
  • 🔍 The block is closed with a plastic cover with the inscription FUSES and a diagram on the reverse side.

2. Engine compartment (optional):

  • 📍 Located next to the battery, in a plastic box with a black lid.
  • 🔧 To gain access, you will need to unclip two latches on the sides of the lid.
  • ⚡ This block contains high power fuses (for example, for the cooling fan or ABS system).

⚠️ Attention: On some versions Qashqai J11 with diesel engines (1.5 dCi or 1.6 dCi) the engine compartment unit may have additional relays for the fuel pump. Accidentally turning them off will make it impossible to start the engine!
📊 How often do you check the fuses in your car?
  • Only in case of malfunctions
  • Once a year for prevention
  • Never checked
  • I don't know where they are

Interior fuse box diagram: decoding by numbers

The interior unit contains most of the fuses responsible for the car's comfortable systems: lighting, multimedia, power windows, etc. Below is the current diagram for Nissan Qashqai J11 (2013–2021), including restyled versions.

Fuse number Rating (A) Purpose Notes
F1 10 Audio system, navigation Responsible for powering the radio and display
F5 15 Cigarette lighter, 12V socket Often burns out when using powerful devices
F10 7.5 Body Control Module (BCM) If it burns out, the central locking system may malfunction.
F15 10 Parking sensors (parking sensors) If the rear sensors do not work, check this fuse
F20 20 Heated seats Burns out due to a short circuit in the wires under the seats

A complete diagram for your configuration can be found on the back of the unit cover or in instruction manual (section 8-30 for European versions). If you have a car with NissanConnect system, pay attention to the fuses F3 (10A) and F25 (15A) - they are responsible for the operation of the touch screen and the Bluetooth module.

Turn off the ignition and remove the key from the lock|Remove the fuse box cover|Visually inspect the fuses for burnt threads|Check the resistance with a multimeter (should be close to 0 ohms)|Install a fuse of the same rating-->

Engine compartment: high power fuses

Engine compartment block Qashqai J11 contains fuses and relays responsible for critical systems: engine starting, cooling, ABS, etc. Higher rating fuses are used here (from 20 to 100 A), and their replacement requires special care.

Main elements of the engine compartment:

  • 🔥 F30 (30A) — Main relay (responsible for powering most circuits).
  • ⚡ F40 (50A) — Radiator cooling fan. Burnout leads to engine overheating!
  • 🚗 F50 (60A) — ABS/ESP. If there is a malfunction, the lamp lights up ABS on the dashboard.
  • 🔋 F60 (100A) — Generator. Burnout makes it impossible to charge the battery.

⚠️ Attention: fuse F60 (100A) is often confused with F55 (80A), which is responsible for powering the electric power steering. Accidentally replacing them with each other can lead to failure EUR or a generator! Always refer to the diagram on the unit cover.

To replace fuses in the engine compartment, use special plastic tweezers, which is usually attached to the inside of the lid. Never try to pull out a fuse with metal tools - this may cause a short circuit!

What should I do if the fuse blows again?

If the fuse blows again after replacement, this indicates short circuit in the chain. In this case:

1. Do not install a fuse of a larger rating - this may cause a fire!

2. Disconnect all devices connected to this circuit (for example, if the cigarette lighter fuse blows, check the connected gadgets).

3. Contact an auto electrician to diagnose the wiring. B Qashqai J11 frequent problems with wire melting in the harnesses under the seats (especially when installing non-standard equipment).

How to properly check and replace a fuse

Diagnosis of fuses in Nissan Qashqai J11 does not require special skills, but it is important to follow a few rules to avoid mistakes. Here are the step-by-step instructions:

1. Preparation:

  • 🔑 Turn off the ignition and remove the key from the lock.
  • 🔌 Disconnect the negative terminal of the battery (especially when working with the engine compartment).
  • 📋 Prepare a new fuse same denomination (color and markings are indicated on the case).

2. Diagnostics:

  • 👁️ Visually inspect the fuse: if the thread inside is broken or there are traces of melting, it is faulty.
  • 📊 For an accurate check, use a multimeter in mode calls. Touch the fuse contacts with the probes - if the resistance tends to infinity, the fuse has blown.

3. Replacement:

  • 🔄 Carefully remove the faulty fuse with tweezers.
  • 🆕 Install the new one, making sure it fits tightly into the socket.
  • 🔍 After replacement, check the operation of the circuit (for example, turn on the headlights or cigarette lighter).

💡

If you don't have a multimeter at hand, you can check the fuse for a spark. To do this, turn on the circuit (for example, headlights) and carefully touch both contacts of the fuse with a metal object (screwdriver). If there is no spark, the fuse is good. Be careful! This method is only suitable for 12V circuits and requires compliance with safety precautions.

Common problems and their solutions

Owners Nissan Qashqai J11 often encounter typical faults related to fuses. Here are the most common cases and how to resolve them:

1. The cigarette lighter or 12V socket does not work:

  • 🔌 Check the fuse F5 (15A) in the cabin block.
  • 🔍 If the fuse is working, inspect the connector for oxidation or mechanical damage.
  • 🔧 Often the problem lies in bad contact between the socket and its connector (you need to tighten the fastenings).

2. Window lifters do not work:

  • 🚗 Check the fuse F22 (25A) and relay K5 in the salon block.
  • 🔄 If the fuse is good, but the power windows do not respond, check door control unit (located in the driver's door).
  • ⚡ B Qashqai J11 With power accessories, the window lift motor often breaks down - replacing it solves the problem.

3. Headlights or lights do not light up:

  • 💡 Check fuses F35 (10A) for low beam and F36 (10A) for dimensions.
  • 🔦 If the fuses are good, inspect light relay (K12) and lamps.
  • 📌 In restyled versions (since 2017) it is responsible for the light lighting module, which may require flashing in case of failures.

💡

If the problem persists after replacing the fuse, never install a larger fuse! This can lead to melted wiring or even a fire. In such cases, a complete diagnosis of the circuit by an auto electrician is required.

Where to buy fuses for Nissan Qashqai J11

Buy fuses for Qashqai J11 possible in several places, but it is important to choose quality parts to avoid repeated failures. Here are the tested options:

1. Official Nissan dealers:

  • ✅ Guaranteed compliance with denominations and standards.
  • ❌ Prices are higher than analogues (for example, a 15A fuse can cost 150–200 rubles).

2. Car shops (for example, AutoDetail, existential, AutoSpetsCenter):

  • 💰 Prices are lower than at the dealer (a set of fuses will cost 300–500 rubles).
  • 🔍 Choose brands Hella, Bosch or Valeo - they meet the standards Nissan.

3. Online platforms (Wildberries, Ozon, AliExpress):

  • 🌍 Large selection, but there is a risk of running into a fake.
  • 📦 When purchasing, make sure that the fuses comply with the standard ISO 8820-3 (this guarantees compatibility with Qashqai J11).

⚠️ Attention: Do not buy fuses of unknown brands from Aliexpress at too low a price! B Qashqai J11 fuses are used low internal resistance, and cheap analogues can overheat, which will lead to melting of the block.

FAQ: Frequently asked questions about Nissan Qashqai J11 fuses

Is it possible to use fuses of a higher rating if the standard ones often blow out?

No, this is strictly prohibited! Fuses are designed for a certain current, and installing a more powerful one will lead to the fact that in the event of a short circuit it will not work. As a result, wiring or electronics may burn out. If the fuse blows repeatedly, look for the cause (short circuit or faulty device in the circuit).

Where can I find a fuse diagram for my Qashqai J11?

The diagram is printed on the back of the fuse box cover. If it's erased, download it instruction manual for your model on the website Nissan Russia (section Electrical equipment → Fuses). For European versions, look for the code manual J11E.

What should I do if the devices do not work after replacing the fuse?

Possible reasons:

  • The fuse is not installed tightly (check the contacts).
  • The relay responsible for this circuit is faulty (for example, a relay K7 for seat heating).
  • The problem is in the device itself (for example, the window lift motor has burned out).
  • Broken wiring or oxidation of contacts in connectors.

For diagnostics, use a multimeter or contact service.

How to distinguish a fuse from a relay in a block?

In blocks Qashqai J11 fuses and relays are visually different:

  • Fuses - small plastic parts with a metal thread inside (usually colored).
  • Relay - large black or gray boxes with legs (about 2x3 cm in size).

On the fuse box cover, the relays are identified by the letter K (For example, K1, K2), and fuses - letter F.

Is it possible to clean the contacts in the fuse box yourself?

Yes, but be careful! To clean use:

  • 🧴 Special contact cleaner (For example, Kontakt 60 or CRC).
  • 🧽 A soft brush or cotton swab soaked in alcohol.
Prohibited: use sandpaper or metal brushes - this will damage the contact coating. After cleaning, dry the block and apply protective lubricant (For example, Liqui Moly Electronic-Spray).