Front fender liners for Nissan Note E11: complete selection and installation guide

Front fenders on Nissan Note E11 - These are not just plastic shields, but a critical element in protecting the body from dirt, stones and corrosion. Owners of this compact van often face the problem of wear of the standard fender liners after 3-4 years of operation, especially in Russian winter conditions with reagents and salt. But how to choose a high-quality replacement without overpaying for the original? And is it possible to install them yourself without experience?

In this article we will look at all the nuances: from the differences between the original fender liners Nissan 68110-4M000 and analogues to step-by-step installation instructions with photos. You will learn which materials can withstand frost better, how to avoid installation mistakes (for example, misalignment of fastenings, which leads to friction on the tire), and why some cheap analogues begin to “crunch” after just a month. And at the end - answers to frequently asked questions, including compatibility with lift kits and tuning arches.

Original vs similar fender liners: what to choose for E11?

From the factory Nissan Note E11 (2013–2020) is equipped with fender liners made of polypropylene with reinforcement, which have an article number 68110-4M000 (right) and 68110-4M001 (left). Their main advantage is a perfect fit and durability (with careful use they last 5–7 years). However, the price for a pair of original parts often exceeds 8–10 thousand rubles, which forces owners to look for alternatives.

Among analogues there are three categories:

• 🔹 OEM analogues (For example, Febi or Meyle) - repeat the shape of the original, but may be 1–2 mm thinner. Price: 3–5 thousand per pair.
• 🔹 Universal (For example, Heko or Polcar) - require pruning, but are cheaper (1.5–3 thousand rubles). Suitable for temporary replacement.
• 🔹 Tuning (For example, Rally Armor) - are made of more durable polyurethane, but cost 12–15 thousand rubles. and weigh 30% more than standard ones.

The key point when choosing an analogue is checking mounting holes. For example, fender liners from Febi 24376 are completely compatible with the original, but Meyle 681104M000 may require modification of the mounting to the bumper. Also note material thickness: if it is less than 3 mm, the fender liner will quickly crack in the cold.

Top 5 mistakes when buying fender liners for Note E11

Even experienced car owners sometimes fall into traps when choosing. Here are the most common mistakes:

1. Ignoring the installation side. Front fender liners for Nissan Note E11 not symmetrical! The right and left differ in the form of attachment to the spar. Original articles: 68110-4M000 (right) and 68110-4M001 (left).
2. Buying “universal” ones without trying them on. For example, fender liners Heko P911 They fit in size, but require trimming in the area of ​​attachment to the arch - otherwise they will cling to the tire when turning.
3. Saving on material. Fender liners made of cheap polyethylene (for example, NoName for 1 thousand rubles) become brittle at -15°C and break from a slight blow.
4. Not taking body modifications into account. For versions with 16-inch wheels (For example, Note 1.5 dCi Tekna) you need fender liners with increased ground clearance, otherwise they will rub against the rubber.
5. Lack of content check. The original set includes clips and bolts (article 08915-4M00A). Cheap analogues often don’t have them - you’ll have to buy them separately.

⚠️ Attention: If you are installing fender liners on Note E11 with a lift kit (+20–30 mm), standard parts will not fit - you need models with extended fasteners (for example, Rally Armor UR).

Step-by-step instructions for installing front fender liners

Installation of fender liners on Nissan Note E11 takes 1.5–2 hours if you have the tools. You will need:

• 🔧 10 mm socket wrench (for bolts attaching to the side member).
• 🔧 Screwdriver with a Phillips bit (for self-tapping screws for the arch).
• 🔧 Plastic clips (6–8 pcs., article number 08915-4M00A).
• 🔧 Silicone sealant (for example, ABRO WS-904) for processing joints.

Step 1: Removing the old fender liner

1. Remove the front wheel and unscrew 3 bolts fastening the fender liner to the side member (with a 10 mm socket wrench).
2. Disconnect 4 clips along the edge of the arch (be careful, they often break!).
3. If the fender liner is stuck, treat the joints WD-40 and wait 10 minutes.

Step 2: Preparing the new fender liner

Before installation, check:

Step 3: Installation and fixation

Start with the top mounts to the arch, then secure the bolts to the spar. Important: Do not immediately tighten them all the way - first align the fender liner along the entire perimeter. After installation, check the gap between the wheel arch liner and the tire (must be at least 15 mm).

How to extend the life of fender liners: 5 tips from the experts

Even the original fender liners are on Nissan Note E11 wear out faster if you do not monitor their condition. Here's what service station experts recommend:

1. Anti-gravel treatment. Apply Dinitrol 479 or Tectyl Bodysafe on the inside of the fender liner before installation. This will protect against sandblasting and salt.
2. Regular washing. Dirt and sand that accumulate between the fender liner and the arch act as an abrasive. Clean this area every 2–3 weeks (especially in winter).
3. Fastening control. Clips and bolts become loose over time. Check them every six months - if the play is more than 2 mm, tighten or replace the fasteners.
4. UV protection. Polypropylene fades in the sun. If the car is parked outdoors, treat the fender liners colorless wax (For example, Sonax NanoPro).
5. Using "mud flaps". Additional bumper guards (for example, Heko Mudflap) will reduce the load on the fender liners by 30–40%.

Pay special attention the junction of the fender liner with the bumper. If there is a gap there, dirt will fly through it directly onto the spar. The solution is to glue the joint 3M Scotch-Weld or install a rubber seal.

What to do if the fender liner is cracked?

If the crack is less than 5 cm, it can be repaired using epoxy glue (For example, Loctite Epoxy) and fiberglass. To do this:

1. Sand the edges of the crack with sandpaper.

2. Apply glue and attach a fiberglass patch.

3. Secure with a clamp for 24 hours.

If the crack is larger or the fender liner is cracked, just replace it.

Comparison of fender liners for different versions of Nissan Note E11

Not all fender liners fit all modifications Note E11. For example, for versions with 1.2 DIG-S (gasoline) and 1.5 dCi (diesel) the form of attachment to the subframe is different. The table below shows the compatibility of popular models:

Fender liner model	Engine compatibility	Need some work?	Average price, rub.
Original 68110-4M000/1	All versions (1.2, 1.5, 1.6)	No	8 000–10 000
Febi 24376	1.2, 1.5 (not suitable for 1.6 with automatic transmission)	No	4 500–5 500
Meyle 681104M000	1.2 DIG-S, 1.5 dCi	Yes (trimming in the bumper area)	3 800–4 200
Heko P911	All versions	Yes (trimming along the arch contour)	1 800–2 500
Rally Armor UR	All versions (including lifted)	No	12 000–15 000

For diesel versions (1.5 dCi) it is important to choose fender liners with reinforced fastening to the subframe, since engine vibrations are higher. For example, original parts have an additional metal insert in the area of ​​the bolt to the spar - analogues often do not have it.

Tuning and protection: alternative solutions for Note E11

If you want not only protection but also a change in appearance, consider these options:

• 🚗 Fender liners with LED backlight (For example, Morimoto XB). LEDs are built in to illuminate the arches. Price: 18–22 thousand rubles. per set. Minus: require connection to the on-board network.
• 🚗 Kevlar fender liners (For example, Rally Armor Kevlar). They weigh 40% less than standard ones, but cost 20–25 thousand rubles. Suitable for sporty riding.
• 🚗 Fender liners with integrated mudguards (For example, Heko Mudflap Pro). They protect not only the arch, but also the bottom of the doors. Price: 5–7 thousand rubles.
• 🚗 3D printing of fender liners. Some workshops make parts according to an individual template from polyamide. Cost: 10–12 thousand rubles. Plus: perfect fit, minus: long production time (2–3 weeks).

For owners who often drive off-road, the best choice is Rally Armor with reinforced fastenings. And if aesthetics is important to you, pay attention to Morimoto XB with backlight: they are connected to the dimensions and look impressive in the dark.

⚠️ Attention: When installing tuning fender liners, check that they do not block access to drain holes in the arch. If yes, drill additional drainage holes (diameter 8–10 mm), otherwise water will accumulate and rust the spar.

FAQ: Frequently asked questions about fender liners on Nissan Note E11

Is it possible to drive without front fender liners?

Technically yes, but this will lead to:

• Accelerated corrosion of side members and arches (2-3 times faster).
• Dirt entering the interior through the ventilation holes.
• Damage to brake hoses and wiring from flying stones.

If your fender liner breaks, replace it as soon as possible—even a temporary, universal option is better than nothing.

What sealant is best to use for joints?

Optimal options:

• ABRO WS-904 — budget, keeps down to -40°C.
• 3M Scotch-Weld DP8005 - professional, but expensive (1.5 thousand rubles per tube).
• Liqui Moly Silikon-Spray — convenient for processing clips.

Don't use regular silicone bathtub caulk - it won't withstand vibrations and will fall off after a month.

Will fender liners from Nissan Micra K13 fit Note E11?

No, despite the external similarity of the platform, the mounts are different:

• U Micra K13 fender liners are attached to the bumper two bolts, and Note E11 — three.
• The shape of the arch cutout is 15 mm narrower, so the fender liner will cling to the tire.

The exception is universal models (for example, Heko P911), which fit both cars after trimming.

How often should the condition of the fender liners be checked?

Recommended schedule:

• Every 5 thousand km — visual inspection for cracks and looseness of fasteners.
• Every 10 thousand km — checking the tightness of joints (if necessary, re-treat with sealant).
• Before winter - a complete inspection (replacing broken clips, cleaning from dirt).

If you frequently drive on gravel, inspect your fender liners every 3 thousand km — stones can even penetrate polyurethane.

Can fender liners be painted?

Yes, but only with special formulations:

• For plastic - Plasti Dip (matte finish) or Rust-Oleum Plastic Primer (for painting).
• For polyurethane - Dupli-Color Flexible Coating (withstands stretching).

Do not use regular car paint - it will crack after 2-3 months. Before painting, be sure to degrease the surface antisilicon.