Nissan Murano Z50 is a crossover that combines elegant design and practicality, where the front bumper plays a key role not only in appearance, but also in safety. This body element takes the first blows in an accident, protects the radiator and optics, and also shapes the appearance of the car. However, over time, the bumper loses its presentable appearance: chips, cracks, and scratches from road gravel or poor parking appear. In some cases, a complete replacement is required due to severe damage or a desire to update the style.

In this article we will look at everything you need to know about the front bumper. Murano Z50 (2008–2014): from original articles and high-quality analogues to step-by-step instructions for dismantling and tuning options. We will pay special attention to typical replacement errors that can lead to problems with mountings or parking sensors. If you are planning a repair or upgrade, here you will find proven solutions and advice from experts.

Original bumper Nissan Murano Z50: articles and features

Factory front bumper for Murano Z50 made of impact-resistant plastic (polypropylene) with reinforcement and coated with paint to match the body color. Original parts are distinguished by precise geometry, perfect fit on the mounts and compatibility with standard parking sensors. However, their price often exceeds 30–40 thousand rubles, which forces owners to look for alternatives.

Main articles of original bumpers:

  • 🔹 62110-4M000 — bumper assembly (without radiator grille), suitable for models 2008–2010.
  • 🔹 62110-4M001 — modification for restyled versions 2011–2014. (with modified fog light mounts)
  • 🔹 62110-4M020 — option for configurations with the system Intelligent Park Assist (additional holes for sensors)

Important: original bumpers are supplied unpainted (color code is indicated separately, for example, KAD for "Titanium Silver") When ordering, check compatibility with your modification - restyled models (after 2010) have a changed shape of the lower edge and mounts for fog lights.

⚠️ Attention: On the market there are counterfeits of original articles with low-quality plastic. Check for a hologram Nissan on packaging and certificates of conformity. A bumper without markings may crack with minimal impact.

Analogs and non-original bumpers: what to choose?

If your budget is limited, you can consider analogues from trusted manufacturers. High-quality non-original bumpers cost 30–50% less, but require careful selection in terms of geometry and material. Top Brands:

  • 🏆 Febi (Germany) - article 22350, an exact copy of the original, but without holes for parking sensors (needs modification).
  • 💎 Dorman (USA) — 924-100, reinforced plastic, suitable for installing additional foglights.
  • 🔧 TYC (Taiwan) - budget option (11-6211-00), but may require adjustment to the fasteners.

When choosing an analogue, pay attention to:

  1. System compatibility Around View Monitor (if installed).
  2. The presence of technological holes for the towing hook (on some versions Murano they are closed with plugs).
  3. The thickness of the plastic - for cheap Chinese bumpers it often does not exceed 3 mm (for the original - 4-5 mm).
📊 Which bumper would you prefer for the Murano Z50?
  • Original Nissan (expensive but reliable)
  • High-quality analogue (Febi, Dorman)
  • Budget option (TYC, Chinese)
  • Already installed the non-original one - happy
Manufacturer Article Price, ₽ Features
Nissan (original) 62110-4M001 35 000–45 000 Perfect fit, compatible with all systems
Febi 22350 22 000–28 000 Needs modification for parking sensors
Dorman 924-100 18 000–24 000 Reinforced plastic, universal fastenings
TYC 11-6211-00 12 000–16 000 May require adjustments

Step-by-step instructions for replacing the front bumper

Replacing the bumper with Murano Z50 does not require special equipment, but will require care - especially when working with parking sensors and mounts. Average work time: 2–3 hours.

Required tools:

  • 🔧 10 and 12 mm socket wrenches.
  • 🔨 Plastic spatulas for removing clips.
  • 🔌 Screwdriver with a Phillips bat.
  • 🧲 Magnet for holding bolts (so they don’t get lost in the engine compartment).

Disconnect the battery (remove the negative terminal)|

Remove the front wheel (if you need to get to the side mounts)|

Disconnect the fog lights and parking sensors connectors|

Prepare a new clip mount (old ones often break during dismantling) -->

Procedure:

  1. Removing the old bumper:
    • Unscrew the 4 bolts securing the bumper to the subframe (access from under the hood).
    • Remove the clips on the sides (in the area of the wheel arches) - there are 6 of them.
    • Disconnect the parking sensor connectors (gently pull the clips).
    • Remove the bumper by sliding it forward and down.
  2. Installing a new bumper:
    • Transfer all fasteners, plugs and sensors (if they are working) from the old bumper.
    • Connect the parking sensor connectors to final fixation of the bumper.
    • Attach the bumper to the clips, then tighten the bolts (do not overtighten - the plastic may crack!).
⚠️ Attention: When installing a bumper with the system Around View Monitor check the camera calibration after replacement. If the image on the screen is distorted, a reset via the diagnostic connector is required (the procedure is described in the manual Nissan Consult).
💡

Before painting a new bumper, be sure to treat it with an antistatic agent - this will prevent dust from sticking during drying. Use a primer with plastic adhesive additives (e.g. 3M Plastic & Paint Prep).

Front bumper tuning: upgrade options

Standard bumper Murano Z50 It looks discreet, but many owners want to give the crossover a more aggressive or sporty look. Popular tuning areas:

1. Installation of body kit:

  • 🚗 Lip spoilers (for example, from Stillen or Nismo) - add dynamics, do not require repainting.
  • 💨 Sports bumpers with enlarged air intakes (suitable for versions with turbo engine VQ35DE).

2. Additional lighting:

  • 💡 LED strips in the lower edge of the bumper (illumination DRL).
  • 🔦 Fog lamps with a beam angle of 120° (for example, Hella Micro DE).

3. Protective elements:

  • 🛡️ Installation metal protection (for off-road use, but worsens ground clearance).
  • 🧲 Magnetic bumper covers (protection against chips when driving on gravel).
How to avoid problems with the traffic police when tuning?

According to Order of the Ministry of Internal Affairs No. 399, any changes to the design of the car (including the bumper) must be certified. If you are installing a body kit that protrudes beyond the body dimensions by more than 50 mm, you will need to make changes to the title. Exception: factory accessories Nismo, which have a certificate of conformity.

Important: when installing additional headlights or LED strips, be sure to use relays and fuses to avoid overloading the standard wiring. On Murano Z50 maximum load on the lighting circuit is 15 A.

Common problems and their solutions

Even after carefully replacing the bumper, problems may occur. Let's look at typical cases and ways to eliminate them:

1. Parking sensors do not work:

  • Check the integrity of the connectors and wiring (often frays near the wheel arch).
  • Reset errors via diagnostic scanner (code C1A10 — sensor malfunction).

2. The bumper does not fit well to the fender:

  • Bend the metal brackets under the hood (do not overdo it - you may break the clips).
  • Check whether the seats on the body are deformed (after an accident).

3. Cracks on the new bumper:

  • If the bumper cracks with a light impact, this is a defect in the material. Contact your dealer for a replacement.
  • For temporary repairs, use welding plastic (device Leister Triac ST) or epoxy glue with reinforcing mesh.
💡

When purchasing a used bumper, be sure to check it for hidden cracks - they may appear after installation. Inspect the inside of the part with a flashlight: microcracks will be visible as white stripes.

Painting a bumper: technology and tips

If the bumper has lost its appearance, but is intact, it can be restored by painting. The process includes several stages:

1. Preparation:

  • Remove the bumper and wash it thoroughly with car shampoo (remove silicone and wax).
  • Fill chips and scratches (use plastic putty, e.g. Novol Plastic).
  • Sand the surface with sandpaper P800→P1200.

2. Primer and painting:

  • Apply an adhesive primer (eg Sikkens Autowave) in 2 layers.
  • Paint the bumper in 3 layers, drying between them (temperature in the chamber - 20–25°C).
  • Apply varnish (recommended PPG Clearcoat for resistance to UV rays).

The cost of professional painting in the service: from 8,000 to 15,000 rubles (depending on color and complexity). Self-painting will cost 3–5 thousand rubles (materials), but requires experience - otherwise smudges or uneven color are possible.

Where to buy a bumper for Nissan Murano Z50: verified suppliers

When choosing a place to buy, be guided by the reputation of the seller and the availability of a guarantee. Best options:

1. Official dealers Nissan:

  • Pros: 100% original, 1 year warranty.
  • Cons: high price, long delivery times (up to 3 weeks).

2. Online stores:

  • 🌍 EXIST.ru — wide range of analogues, fast delivery.
  • 🌍 EMEX.ru — there are often discounts on original spare parts.

3. Disassembly:

  • You can find a used bumper in good condition for 5–10 thousand rubles.
  • Check on Bamper.by or Avito (filter by region).
⚠️ Attention: When purchasing from a salvage yard, be sure to check the VIN number of the donor car with yours. Bumpers for Murano Z50 before and after 2010 are similar in appearance, but have different mounts for fog lights.

FAQ: Frequently asked questions about the front bumper Nissan Murano Z50

Is it possible to install a bumper from Murano Z51 on Z50?

No, these models have different body geometry. Bumper Z51 (2015+) are wider and lower, and the mountings do not line up with Z50. The exception is some body kits from Nismo, which are universal for both generations, but require improvement.

What glue is best to use to repair cracks?

For plastic bumpers, a two-component epoxy adhesive with a reinforcing mesh is optimal (for example, 3M Scotch-Weld DP8005). An alternative is welding plastic with solder Polyvance. Don't use superglue or hot glue - they won't withstand vibrations.

Do I need to remove the bumper to replace the fog lamps?

No, on Murano Z50 fog lamps (H11) can be changed without removing the bumper. It is enough to unscrew the plastic protection under the arch and remove the cartridge through the technological hole. Use lamps with a color temperature no higher than 4300K to avoid dazzling oncoming drivers.

What to do if the bumper lights up after replacing Check Engine?

Most likely, during dismantling, the air temperature sensor connector (located behind the radiator grille) was damaged. Check the error code using a scanner (for example, P0115). If the sensor is faulty, replace it (part no. 22680-4M000).

How to protect the bumper from chips?

Effective ways:

  • Installing a transparent protective film (3M Scotchgard).
  • Vinyl armor sticker on the bottom edge.
  • Regular treatment with a polish containing ceramic particles (for example, Ceramic Pro).

Avoid wax polishes - they wash off quickly and do not protect against gravel.