Nissan Almera Classic B10 - a time-tested car that still remains popular in the secondary market. However, over time, the trunk lid trim loses its original appearance: cracks, abrasions appear, and in some cases even peels off from the base. Replacing or repairing this part not only improves the aesthetics of the interior, but also protects the metal from corrosion, prevents squeaks and increases sound insulation.

In this article we will figure out how to choose high-quality cladding, which materials are best suited for long-term operation, and how to replace it yourself without contacting service. We will also consider typical mistakes that owners make during installation and give recommendations for caring for the new skin.

Why does the trunk lid trim need to be replaced?

Trunk lid trim Almera Classic B10 made of pressed cardboard covered with fabric or artificial leather. Over time, this material is subject to several types of wear:

  • 🔥 Thermal impact — temperature changes (especially in winter) lead to cracking of the adhesive layer and peeling of the skin from the metal base.
  • 💦 Humidity and condensation — if the trunk seals are worn out, moisture penetrates under the skin, causing the cardboard to swell and mold to appear.
  • 🚗 Mechanical loads - Frequent transportation of goods, impacts when closing the lid or careless loading of things lead to deformation and ruptures.
  • ☀️ Ultraviolet - the sun's rays burn out the fabric covering, making it fragile and brittle.

If you ignore these problems, over time the casing will begin to “bounce”, make squeaks when moving, and in advanced cases, completely fall off in pieces. On Almera Classic B10 with a mileage of more than 150 thousand km, replacing the trunk lid trim is recommended in 80% of cases during a comprehensive restoration of the interior.

⚠️ Attention! If moisture has accumulated under the casing, be sure to dry the metal base and treat it with an anti-corrosion compound before replacing it. Otherwise, the new casing will quickly become unusable.

What materials are used for cladding?

There are several types of trunk lid trim available on the market. Nissan Almera Classic B10. They are distinguished not only by their appearance, but also by their performance characteristics. Let's look at the main options:

Material Benefits Disadvantages Average service life
Original (OEM) Perfect match in shape, factory quality fasteners High price, difficult to find on the secondary market 8–10 years
Artificial leather (vinyl leather) Moisture resistant, easy to clean, modern look May crack in the cold, slippery surface 5–7 years
Fabric (velor, Alcantara) Pleasant to the touch, good sound insulation Difficult to clean, absorbs odors, gets dirty quickly 4–6 years
Plastic (ABS plastic) Strength, resistance to mechanical damage Low sound insulation, may make noise when driving 7–9 years

For most owners Almera Classic B10 the optimal choice would be vinyl leather — it combines affordable price, durability and ease of maintenance. If originality is important, you should look for a used part in good condition at a disassembly site.

📊 What cladding material do you prefer?
  • Original (OEM)
  • Faux leather
  • Fabric (velor)
  • Plastic
  • Another option

Where to buy trunk lid trim for Nissan Almera Classic B10?

There are several ways to purchase new upholstery. Let's look at the pros and cons of each option:

  • 🛒 Official dealers Nissan - quality guarantee, but the price can reach 10–15 thousand rubles. Suitable if you need a 100% original part.
  • 🔧 Car disassembly - a budget option (2-5 thousand rubles), but the condition of the part must be checked personally. Risk of running into worn-out casing.
  • 🌍 Online stores (Exist, Autodoc, KIA-Motors) — a wide range of analogues, prices from 3 to 8 thousand rubles. It is important to check compatibility with B10.
  • 🏭 Tuning manufacturers (for example, SAD, Heko) — they offer skins with improved sound insulation or non-standard materials (carbon fiber, Alcantara).

When purchasing, pay attention to:

  • 📏 Exact dimensions — the sheathing should fit perfectly on the metal base without gaps.
  • 🔩 Completeness — the kit should contain clips, pistons and, if necessary, glue.
  • 📄 Certificates — trusted sellers always have documents confirming the quality of materials.
⚠️ Attention! When ordering online, please check whether the cladding is suitable for Almera Classic B10, and not for the restyled version Almera N16. These models have different trunk lid shapes!

Step-by-step instructions for replacing the casing

Replace trunk lid trim Nissan Almera Classic B10 You can do it yourself with a minimal set of tools. The whole process will take about 1–2 hours. Here's what you'll need:

Flat blade screwdriver (or plastic puller)

New casing with fastening kit

Car upholstery adhesive (e.g. 3M Super Trim Adhesive)

Degreaser (acetone or alcohol)

Hairdryer (to warm up the adhesive layer)

Gloves and masking tape -->

Step 1. Dismantling the old sheathing

Using a screwdriver or puller, carefully pry the plastic pistons around the perimeter of the casing. On Almera Classic B10 Typically 6–8 fasteners are used. If the skin is glued, heat it with a hairdryer (temperature 50–60°C) and slowly separate it from the metal so as not to tear it.

Step 2. Preparing the base

Remove any remaining old adhesive from the metal trunk lid. Treat the surface with a degreaser. If there are traces of rust, sand them with sandpaper and apply anti-corrosion primer.

Step 3. Installing new trim

Before installation, try on the part - it should fit snugly without distortion. Apply glue to the metal base (in a thin layer, without gaps). Press the trim down, starting from the center, and secure it with masking tape for 15-20 minutes. Then install the pistons.

Step 4. Check

Close and open the trunk lid several times to make sure that the trim does not come off or make any unusual noises. If necessary, tighten the fasteners.

💡

If the covering does not want to “sit” in place, warm it up with a hairdryer - this will make the material more elastic and make installation easier.

Typical mistakes when replacing casing

Even experienced car owners sometimes make mistakes that lead to rapid wear of the new trim. Here are the most common of them:

  • 🧴 Using the wrong glue - for example, “Moment” or PVA are not intended for auto sheathing. Over time they turn yellow and lose elasticity.
  • 🔥 Hairdryer overheating - if the temperature exceeds 70°C, the artificial leather may become deformed and the fabric may shrink.
  • 🔩 Insufficient number of fastenings - if you save on pistons, the casing will “walk” and creak.
  • 🚿 Ignoring moisture - if you do not dry the metal before gluing, mold will appear under the skin.

Another common problem is incorrect installation sequence. For example, some people glue the sheathing on first and then try to install the caps. This leads to distortions and unevenness. On Almera Classic B10 First, fix the trim with clips in the corners, and then glue the center.

⚠️ Attention! If, after replacement, the casing begins to “bounce” when moving, check to see if dust or debris has gotten under it. Sometimes it is enough to remove the part and blow out the base with compressed air.

How to care for new cladding?

To make the trunk lid trim last longer, follow these simple recommendations:

  • 🧼 Regular cleaning - for artificial leather, use damp microfiber and a mild detergent (for example, Sonax). Fabric upholstery is cleaned with a vacuum cleaner or a special brush.
  • 🌞 UV protection — in hot weather, cover the trunk with a light blanket or use UV protective sprays.
  • 🚫 Avoid harsh chemicals — solvents, gasoline or acetone can damage the coating.
  • 🔧 Check the fastenings — once every six months, inspect the caps and, if necessary, tighten them.

If the upholstery is made of velor or Alcantara, use special foam cleaners (For example, Turtle Wax). Under no circumstances rub it with hard brushes - this will ruin the bristles.

What should I do if the sheathing is peeling off at the edges?

If gaps appear around the perimeter, do not rush to completely change the casing. In many cases, it is enough to apply a thin layer of glue 3M Super Trim Adhesive under the peeled areas and press them with a weight for 12–24 hours. For reliability, you can additionally secure the edges with double-sided tape.

Tuning the trunk lid trim

Replacing the upholstery is a great reason to add personality to the interior Almera Classic B10. Here are some tuning ideas:

  • 🎨 Upholstery in a different color — for example, red or blue trim looks contrasting against the background of a gray interior.
  • 🔊 Additional sound insulation - before installing the casing, stick a layer on the metal Splen or Bimast. This will reduce the noise level by 20-30%.
  • 💡 Trunk light — an LED strip connected to the lighting can be built into the casing.
  • 📦 Organizers and pockets — some craftsmen sew mesh compartments for small items to the trim.

If you want to radically change the design, pay attention to carbon film. It can be used to cover plastic trim, giving the interior a sporty look. The main thing is not to overdo it with the decor, so as not to spoil the classic style Almera.

💡

When tuning the trim, take into account the overall style of the interior. For example, if the seats are covered in leather, then the trunk lid should be in the same material and color.

FAQ: Frequently asked questions about the trunk lid trim Nissan Almera Classic B10

Is it possible to restore old siding instead of replacing it?

Yes, if the damage is not critical. For example, small cracks in artificial leather can be repaired liquid skin (sold in auto stores). Fabric upholstery can be cleaned and painted with a special spray. However, if the cardboard base is delaminated or rotten, restoration is pointless - a replacement is needed.

How much does it cost to replace the casing at the service?

The cost of work in car services in Moscow and the regions varies from 1,500 to 3,500 rubles. Includes dismantling the old sheathing, preparing the base and installing a new one. If additional sound insulation is required, the price will increase by 500–1,000 rubles.

What glue is best to use for sheathing?

Optimal options:

  • 3M Super Trim Adhesive — elastic, does not turn yellow, withstands temperature changes.
  • Kleo Proffessional 8105 - sets quickly, suitable for fabric and leather upholstery.
  • Cosmofen CA 12 - superglue for plastic parts (use carefully, as it is inelastic).

It is not recommended to use universal adhesives such as “Moment” or “Titan” - they are not intended for car upholstery.

What to do if the casing creaks after replacement?

Creaks usually occur due to:

  • poorly fixed pistons (tighten them);
  • debris getting under the casing (remove and blow out);
  • insufficient layer of glue (re-glue problem areas).

If the squeaking persists, try gluing a thin layer of foam rubber or vibroplast between the sheathing and the metal.

Is the casing suitable for Nissan Almera N16 on Classic B10?

No, these models have different trunk lid shapes. Sheathing from N16 It will either be too big or the fastenings will not match. Always check compatibility by VIN or part number.