Cigarette lighter in Nissan Juke - one of the most popular interior elements, especially if you actively use chargers, DVRs or other gadgets. But what if it suddenly stopped working? In 90% of cases, the problem lies in a blown fuse - a small but critically important part. This article will help you understand where is the cigarette lighter fuse located in Juke first (J10, 2010–2019) and second (J15, from 2019) generations, how to check and replace it without contacting service.

We will look at fuse block diagrams in detail, indicate the exact part numbers for different years of manufacture, and also give practical diagnostic tips. We will pay special attention common mistakesthat owners allow when replacing - this will help avoid repeated breakdowns or even short circuits. If you've never opened a fuse box, don't worry: the instructions are designed so that even a beginner can handle the task.

Where is the cigarette lighter fuse located? Nissan Juke

B Nissan Juke The cigarette lighter fuse is located in interior fuse box (aka fuse box). Its location depends on the generation of the car:

  • 🔧 J10 (2010–2019): the unit is located under the instrument panel, to the left of the steering column. To gain access, you need to open the cover (it is secured with latches).
  • 🔧 J15 (since 2019): the block has been moved under the glove compartment, closer to the central tunnel. The cover is removed by pressing the latches on the sides.

Important: in some trim levels Juke (for example, with the option NissanConnect) maybe additional fuse for a 12V socket in the trunk. His number is different from the main one!

To avoid confusion, remember: in 95% of cases, the fuse with numbers F37 (15A) or F40 (20A) is responsible for the cigarette lighter, but this depends on the year of manufacture and the market (European or Japanese version). See the table below for exact details.

📊 What Nissan Juke do you have?
  • J10 (2010–2019)
  • J15 (since 2019)
  • I don't know the generation
  • I have a different Nissan model

Cigarette lighter fuse numbers by year

The manufacturer does not always adhere to a single diagram, so the fuse number may vary. Below is the current table for Nissan Juke different years:

Generation Year of manufacture Fuse number Rating (A) Location in the block
J10 2010–2013 F37 15 Top row, 5th from left
2014–2017 F40 20 Bottom row, 3rd from left
2018–2019 F37 or F58 15/20 Depends on the configuration
J15 2019–present F42 20 Middle row, 4th from left

⚠️ Attention: On Japanese market vehicles, the cigarette lighter fuse may have a number F20 (10A). This is due to other electricity consumption standards. Check your version Juke by VIN if in doubt.

If your year of manufacture is not listed in the table, check fuse box cover - on its inside there is usually a current diagram with signatures. You can also use official manual (registration required).

How to check the cigarette lighter fuse

Before replacing the fuse, make sure that this is the problem. Here are the step-by-step instructions:

  1. Turn off the ignition and remove the key from the lock. This will prevent a short circuit during testing.
  2. Remove the fuse box cover (as described above).
  3. Find the right fuse by number from the table. For convenience, use tweezers or a special puller (usually included with the car).
  4. Visual inspection:
    • 🔍 If the wire is inside the fuse torn or blackened - it burned down.
    • 🔍 If the wire is intact, but the fuse is hot, this is a sign bad contact in the nest.
  5. Checking with a multimeter (optional):
    • 📊 Switch the tester to circuit test mode (diode icon).
    • 📊 Touch the fuse contacts with the probes. If resistance 0 ohm - he is correct. If OL (break) - replacement required.

⚠️ Attention: Never test a fuse for a spark by inserting it back into its socket with the ignition on. This may damage the on-board electronics!

☑️ What you need to check the fuse

Done: 0 / 5

Step by step replacement of the cigarette lighter fuse

If the fuse is blown, you can replace it in 2-3 minutes. Follow the instructions:

  1. Buy a new fuse of the same rating (15A or 20A). Using a fuse with a different value will lead to a fire or failure of the cigarette lighter!
  2. Remove the blown fuse tweezers. Do not pull it with your fingers; you may damage the socket.
  3. Install a new fuse to the same nest. Make sure it fits snugly.
  4. Check the operation of the cigarette lighterby connecting a known working device (for example, a phone charger).

If after replacing the fuse the fuse burns out again, the problem lies deeper:

  • 🔌 Short circuit in the cigarette lighter wiring.
  • 🔌 Outlet fault (melted contacts, moisture ingress).
  • 🔌 Overload due to the connection of powerful devices (for example, a car refrigerator).

💡

If you don’t have tweezers at hand, you can carefully remove the fuse with two flat-head screwdrivers, prying it off on both sides. But don't use too much force—plastic clips are fragile!

Common mistakes when replacing a fuse

Even something as simple as replacing a fuse can turn into problems if you make one of these mistakes:

  • Using "bugs" (homemade wire jumpers). This direct path to fire — the fuse is designed for a certain load for a reason.
  • Installing a larger fuse (eg 25A instead of 15A). If overloaded, it will not burn out, but may damage the wiring.
  • Ignoring the cause of burnout. If the new fuse blows immediately after installation, you must check the circuitrather than changing it again.
  • Metal objects getting into the block. Screwdrivers, keys or coins can short circuit adjacent fuses.

⚠️ Attention: B Nissan Juke with the system NissanConnect The cigarette lighter fuse may be connected to the media circuit. If the radio stops working after replacement, check the fuse F10 (10A) in the same block.

What should I do if the fuse blows again?

If the new fuse blows immediately after installation, there is a short circuit in the cigarette lighter circuit. It is difficult to look for it on your own without experience - it is better to contact an auto electrician. A temporary solution may be to disconnect the cigarette lighter connector from the wiring (it is located behind the center console).

How to extend the life of a cigarette lighter fuse

To avoid frequent fuse replacement, follow these guidelines:

  • 🔋 Do not connect devices with power higher than 120 W (for example, car compressors or electric kettles). There is a socket for them in the trunk with a separate fuse.
  • 🔋 Use quality splitters with overload protection. Cheap tees often cause short circuits.
  • 🔋 Clean the cigarette lighter socket regularly from dust and debris. Metal particles can short out the contacts.
  • 🔋 Do not leave devices in the cigarette lighter for a long time, especially with the ignition off. This drains the battery and puts stress on the circuit.

If you often use a cigarette lighter to charge gadgets, consider installing additional 12V socket with separate fuse. This will reduce the load on the standard chain and protect you from unpleasant surprises.

💡

The cigarette lighter fuse in a Nissan Juke is the weak link that protects the electronics from overload. Replacing it costs pennies, but ignoring the problem can lead to expensive wiring repairs.

FAQ: Frequently asked questions about the cigarette lighter fuse in Nissan Juke

Can I use a 25A fuse instead of a 15A fuse?

No, it's dangerous! The fuse is designed for the maximum load of the circuit. If you install a more powerful one, in the event of a short circuit it will not burn out, but the wiring will begin to melt, which can lead to a fire.

Why does the fuse burn out immediately after replacement?

This indicates short circuit in the cigarette lighter circuit. The reasons may be different: damaged wire insulation, a faulty socket, or a connected device with an internal short circuit. Without diagnostics with a multimeter or visual inspection of the wiring, the problem cannot be solved.

Where is the cigarette lighter fuse in the trunk?

B Nissan Juke with the option of an additional 12V socket in the trunk, its fuse is usually numbered F50 (15A) and is located in salon block (not in the trunk!). Some versions for the US market may have a separate fuse box in the luggage compartment - check with the manual.

Which fuse is responsible for the USB ports in Juke?

USB ports in Nissan Juke (eg in the center console) usually connected to a fuse F15 (10A) or F22 (7.5A), depending on the year. They are not connected to the cigarette lighter circuit, but if they burn out they also require checking.

Is it possible to drive without a cigarette lighter fuse?

Technically yes, but this highly not recommended. Without a fuse, the cigarette lighter circuit remains unprotected. A short circuit may burn out the wiring, control unit, or even cause a fire. If the fuse frequently burns out, it is better not to use the cigarette lighter temporarily until the cause is eliminated.