Many compact hatchback owners Nissan Tiida are faced with the need to increase the volume of the luggage compartment to transport long cargo. The standard interior configuration allows the backrests to be folded down, but sometimes it is necessary to completely remove the seats for transporting large items or for maintenance.
The process of removing the rear row on this model has its own characteristics, depending on the year of manufacture and body type (hatchback or sedan). Incorrect actions may result in damage to fasteners or interior trim. In this material we will analyze in detail the algorithm of actions, tools and nuances that will help you get the job done quickly and without consequences.
Preparing tools and assessing the situation
Before starting work, you need to make sure that you have a minimum set of tools at hand. Most often for dismantling seats in Nissan Tiida No specialized equipment is required, but having the right keys will speed up the process significantly. You will need sockets, screwdrivers and possibly a pry bar to carefully pry the elements off.
It is important to assess the condition of the fastenings. Over time, plastic fasteners can become brittle and bolts can become stuck with corrosion. If the vehicle is operated in harsh conditions, it is recommended to pre-treat the threaded connections with a penetrating lubricant. This will save energy and protect parts from damage.
- 🔧 Socket wrench or ratchet with a 10 or 12 mm head (depending on the year of manufacture)
- 🪚 Flathead screwdriver with wide blade for removing plugs
- 🛡️ Gloves to protect hands from sharp metal edges and dirt
Make sure the luggage compartment is clear of foreign objects. Debris or forgotten items may interfere with access to fasteners or fall into hard-to-reach areas when removing seats. Give yourself plenty of room to maneuver so you can move comfortably around your vehicle.
Removing the lower seat cushion
The lower part of the rear sofa in Nissan Tiida It is fixed not with bolts, but with special metal hooks hooked onto the hinges of the body. This design solution allows you to quickly empty the trunk floor. You need to approach the front edge of the cushion from the inside of the cabin.
Grab the front edge of the pillow and pull it up sharply. Don't be afraid to apply force, as the latches are quite rigid. Sometimes you need to rock the seat to release the hooks from their grooves. As soon as you feel that the latches are disengaged, remove the cushion from the passenger compartment.
Some modifications may have additional fastenings at the bottom. If the cushion does not budge, inspect the area underneath for bolts or studs. In rare cases, to access them you must first remove the plastic floor coverings.
⚠️ Attention: When removing the cushion, be extremely careful not to scratch the plastic sills or door frame trim with the sharp metal seat frame.
After removing the lower part, access to the base of the backrests will open. At this point you will see where the bolts are attached to hold the top of the sofa in place. Check for any wires or sensors under the pad that could be accidentally damaged by sudden movements.
Removing the backrests of the rear sofa
The rear seat backs are attached to the body with bolts located at the top, near the ceiling, and sometimes at the bottom, near the floor. First you need to unscrew the top bolts. This may require removing the plastic caps covering the fastener heads. Use a flathead screwdriver to carefully pry them up and remove them.
Unscrew the bolts with a socket wrench. Please note that on some models the bolts may be over-tightened. Do not use excessive force to avoid stripping the threads. After unscrewing the upper fasteners, carefully pull the backrest towards you and up, releasing the lower hinges.
- 🔩 Check the condition of the threaded connections before assembly
- 🪑 Carefully place the removed backrest in the trunk so as not to wrinkle the upholstery
- 🔍 Inspect the mounting points for signs of corrosion or damage
If you plan to transport cargo frequently, it makes sense to leave the removed backrests at home or in the garage to avoid taking up space in the trunk. However, if you're just putting them away temporarily to transport long pipes, you can stow them in the cargo area.
- Hatchback (C11/C12)
- Sedan (C11/C12)
- I don't know the body model
Features of the sedan and hatchback body
The removal process may vary slightly depending on the body type of your vehicle. In a hatchback Nissan Tiida The trunk is accessible through the rear door, making it easy to remove large items. In the sedan, access is limited to the trunk lid opening, which requires greater care when removing the backrest.
In a sedan, you often have to fold the seatbacks down and push them through the opening. If the backrests do not fold due to a broken mechanism, they will have to be removed completely. This complicates the process, since the dimensions of the removed backrest may be larger than the trunk opening.
It is important to consider the geometry of the cabin. In a sedan, the rear parcel shelf may prevent the backrest from being fully removed. Sometimes it is necessary to remove the rear shelf to clear the way. This is an additional operation that takes time, but is necessary to complete the job successfully.
☑️ Dismantling in a sedan
Technical nuances and hidden fastenings
Sometimes manufacturers hide fasteners under decorative trim or upholstery. IN Nissan Tiida This is rare, but it is worth checking all possible options. Inspect the side panels of the cabin to see if there are additional fasteners or bolts that hold the seat in place in emergency situations.
Also pay attention to the ISOFIX fastening system. If your car has child seats, the ISOFIX anchor may be located under the seat upholstery. When dismantling, do not damage these elements, as they are necessary for the safety of children. Carefully remove the upholstery if access to the bolts is blocked.
In some cases, it may be necessary to remove the seat belts. If the belt interferes with the removal of the backrest, unscrew the bolt securing it and move the belt to the side. Be sure to mark the position of the bolts so that everything will fall into place during assembly.
⚠️ Attention: Never leave seat mounting bolts on the floor of the cabin or in the trunk unattended. Small parts can get lost or get caught in the mechanisms.
What to do if the bolt does not come off?
If the bolt is stuck, use a penetrating lubricant and give it time to work. You can gently tap the head of the bolt with a hammer to break up the rust. If a bolt breaks, use a bolt extractor to remove the broken bolts.
Reinstallation and testing
After completing the necessary work or transporting goods, proceed to install the seats in place. The process is the reverse of dismantling: first, the lower hinges are inserted into the floor grooves, then the backs are attached to the ceiling. Make sure all latches engage until they click into place.
Tighten the mounting bolts sufficiently, but do not overtighten them. Excessive force can lead to thread breakage or metal deformation. Check the secure fit by rocking the seat with your hands. It must be firmly fixed and have no backlash.
Reinstall the plastic plugs. They protect the bolts from dirt and moisture, and also improve the appearance of the interior. Make sure the seat upholstery is not twisted or wrinkled. Adjust the fabric as necessary to ensure it lies flat.
Before tightening the bolts, check that no foreign objects have fallen under the seat. Stones or small parts can create an unpleasant squeaking noise when driving.
Mount Compatibility Chart
Below is a table with the main types of mounts for different generations Nissan Tiida. This will help you prepare for work in advance and choose the right tool.
| Generation | Body type | Pillow attachment | Backrest fastening |
|---|---|---|---|
| C11 (2004-2011) | Hatchback | Metal hooks | M10 bolts (top) |
| C11 (2004-2011) | Sedan | Metal hooks | M10 bolts (top + bottom) |
| C12 (2011-2019) | Hatchback | Combined | M12 bolts (top) |
| C12 (2011-2019) | Sedan | Combined | M12 bolts (top + bottom) |
Please note that newer models may use custom head bolts or special hex keys. If the standard tool kit does not fit, check the vehicle's equipment or refer to the manufacturer's specifications.
The correct sequence of actions and accuracy when working with fragile plastic elements is the key to successful dismantling and installation of seats without damage.
Frequently asked questions and answers
Do I need to disconnect the battery before removing the seats?
In most cases, it is not necessary to disconnect the battery as there are no electrical components in the rear seats that require disconnection. However, if you have heated seats or weight sensors, it is best to disconnect the terminal for safety.
Is it possible to transport cargo without removing the seats?
Yes, in Nissan Tiida The backrests can be folded down to increase trunk volume. But for carrying very long or heavy loads, completely removing the seats will provide greater safety and easier stowage.
How to prevent loss of bolts during dismantling?
Use a magnetic stand or a special container for small parts. You can also tape the bolts to the washers with masking tape to prevent them from falling out while working.
Is it difficult for one person to put the seats back on?
You can install the bottom cushion yourself, but to fix the backrests it is better to have an assistant who will hold the backrest while you tighten the bolts. This is especially true for sedans.
What to do if the hook lock is broken?
You can purchase a new clamp at specialized spare parts stores. If the latch is broken, you can temporarily use ties or wire, but for permanent use it is better to replace the part.
It is critically important to check that all elements are securely fastened before driving, as loose seats can become dangerous projectiles during sudden braking.