Nissan Teana 2007 bolt pattern: wheel and tire parameters for J31

Nissan Teana The second generation (J31), released in 2007, remains a popular choice among car enthusiasts due to its reliability, comfort and balanced performance. However, when replacing wheels, many owners are faced with the question: which bolt pattern is suitable for this model? An error in choosing the parameters of wheels or tires can lead not only to problems with handling, but also to premature wear of the suspension.

In this article we will analyze in detail all the technical nuances: from standard values PCD (bolt patterns) And departure (ET) to the diameter of the central hole (DIA) and recommended tire sizes. You will also find compatibility tables, tips on selecting non-original drives, and answers to frequently asked questions. If you are planning tuning or seasonal wheel changes, this material will help you avoid costly mistakes.

What is a bolt pattern and why is it important for Nissan Teana J31

Bolt pattern (or PCD — Pitch Circle Diameter) is the diameter of the circle on which the wheel mounting holes are located. For Nissan Teana 2007 this parameter is strictly regulated by the manufacturer. A mismatched bolt pattern leads to:

• 🔧 Uneven load distribution on the hub, which accelerates bearing wear.
• 🚗 Vibrations at high speeds, especially noticeable on the highway.
• 🛠️ Problems with balancing, even if the discs are perfectly aligned.

Owners Teana J31 It is often mistakenly believed that discs from other models can be used Nissan (For example, Maxima or Altima), but this is not always true. Even if the PCDs are the same, they may differ departure (ET) or center hole diameter (DIA), which will make installation impossible without adapter rings.

⚠️ Attention: Using rims with an incorrect bolt pattern will void the suspension warranty and may result in denial of insurance claims in the event of an accident. Always check the parameters with the technical documentation!

Standard bolt pattern parameters for Nissan Teana 2007

For Nissan Teana J31 2007 The manufacturer has set the following factory wheel parameters:

Parameter	Meaning	Note
Bolt Pattern (PCD)	5×114.3	5 holes, circle diameter 114.3 mm
Departure (ET)	+40 mm	Acceptable deviation is ±5 mm for tuning discs
Center Hole Diameter (DIA)	66.1 mm	When using discs with a large DIA, centering rings will be required
Mounting bolt thread	M12×1.25	Bolt length - 27–30 mm
Factory tire size	215/60 R16 or 215/55 R17	Depends on the configuration

It is important to note that the parameters PCD 5×114.3 matches most models Nissan And Infiniti that period, but departure (ET) may vary. For example, disks from Nissan Maxima A34 have PCD 5x114.3, but their offset is +35 mm, which is not critical, but can affect handling.

Acceptable wheel and tire sizes for Teana J31

The manufacturer allows the use of several wheel sizes for Nissan Teana 2007, but with reservations. Below is a compatibility table based on official data and owner experience:

Disk size	Recommended tire size	Notes
6.5J×16 ET40	215/60 R16	Standard for basic equipment
7J×17 ET40	215/55 R17	Optional for versions with engine VQ25DE
7.5J×18 ET40	225/50 R18	Requires checking clearances in arches when fully loaded
8J×19 ET38	235/45 R19	Only for tuning versions, problems with the odometer are possible

When choosing custom sizes, consider:

• 📏 Disc width should not exceed 8J without modification of arches.
• 🔄 Departure (ET) less +35 mm increases the load on the wheel bearings.
• ⚖️ Tire diameter should not differ from the standard by more than 3% (affects the speedometer readings).

How to measure bolt pattern yourself

If you do not have access to technical documentation, you can measure the bolt pattern yourself. You will need:

• 📐 Caliper or ruler.
• 🔧 Wheel removal key (optional).

Step by step instructions:

1. Remove the wheel or measure the distance between the centers of two adjacent holes (A).
2. For a 5-bolt mount, multiply this value by 1.701 (coefficient for 5 holes). For example, if A = 70 mm, then PCD = 70 × 1.701 ≈ 119 mm. But for Teana this value should be 114.3 mm - if the result is different, the disc is not suitable.
3. Check the diameter of the center hole (DIA) - it must be no less 66.1 mm.

Check PCD with technical data|Measure offset (ET) of stock wheel|Check center hole diameter (DIA)|Make sure bolt threads are compatible-->

⚠️ Attention: When measuring the bolt pattern on an installed wheel, the error can reach 2–3 mm. For accuracy, remove the disc from the hub or use specialized templates.

Compatible with other Nissan and Infiniti models

Owners Teana J31 People often wonder whether it is possible to use disks from other models. Here is the list of compatible cars with PCD 5×114.3:

• 🚘 Nissan Maxima A34/A35 (2004–2014) - same PCD, but offset may vary (ET35–45).
• 🚗 Nissan Altima L32/L33 (2007–2012) - wheels fit 16–17".
• 🏎️ Infiniti G35/G37 (2003–2013) - compatible, but require DIA verification (often 66.1 mm).
• 🚙 Nissan Murano Z50/Z51 (2003–2014) - discs only 18" with departure ET40.

However, there are nuances:

• Departure (ET): Discs from Infiniti often have overshoot ET35, which moves the wheel outward by 5 mm. This may cause friction against the arch when fully loaded.
• Center Hole (DIA): U Maxima A35 DIA is 66.1 mm, and Altima — 66.1 or 73.1 mm. In the second case, centering rings will be required.

What happens if you ignore the DIA mismatch?

Using rims with a large center hole without rings will cause the wheel to run out because the hub is not centered correctly. This causes vibrations at speeds above 80 km/h and accelerated wear of the wheel bearings.

Common mistakes when selecting disks and how to avoid them

Even experienced car owners sometimes make mistakes when choosing wheels for Teana J31. Here are the most common mistakes:

1. Ignore departure (ET): Wheels with offset ET30 visually look more aggressive, but shift the axis of rotation, increasing the load on the suspension by 15–20%.
2. Incorrect DIA: The centering rings must be metal, and not plastic ones - the latter are deformed when the bolts are tightened.
3. Disc width mismatch: Wheels are wider 8J require rolling out the arches or using spacers, which is unsafe.
4. Saving on bolts: Bolts with incorrect threads (M12×1.5 instead of M12×1.25) can strip the threads in the hub.

Critical error: using disks with PCD 5x112 (for example, from Audi or VW). The difference of 2.3 mm seems insignificant, but it leads to uneven tightening of the bolts and the “eight” of the wheel when driving.

FAQ: Answers to frequently asked questions about the Teana 2007 bolt pattern

Is it possible to install 5x112 disks instead of 5x114.3?

No, this is strictly prohibited. A difference of 2.3 mm leads to the fact that only 2-3 bolts out of 5 will be tightened correctly, and the rest will be skewed. This causes vibrations and the risk of the wheel coming off at high speed.

What is the maximum diameter of discs that can be installed without modifications?

Without modification of arches and suspension, the maximum safe size is - 18" with tires 225/50 R18. Discs 19" will require the tire profile to be reduced to 40–45, which will negatively affect comfort.

Do I need to balance wheels after replacing rims?

Yes, even if the discs are new. Balancing compensates for uneven weight distribution between tire and wheel. For Teana J31 Dynamic balancing on a machine with motion simulation is recommended.

Can spacers be used to adjust offset?

Technically yes, but this solution has risks: spacers increase the load on the wheel bearings and can cause them to wear out prematurely. If the offset differs by no more than 5 mm, it is better to choose wheels with the correct ET.

Which tires are best for the winter season?

For Teana 2007 optimal tire size 215/60 R16 with speed index H (up to 210 km/h) and load index not lower 95. Popular models: Nokian Hakkapeliitta R3, Michelin X-Ice North 4.