Replacing and selecting a windshield for Nissan Note E11: a complete guide

Owners of a compact hatchback Nissan Note first generation (E11 body) are often faced with the need to replace the windshield due to stone chips or cracks spreading over the entire area. This is not just a matter of aesthetics, but also a critical safety element, as the windshield provides up to 30% of the body's rigidity during a rollover and protects the interior from aerodynamic noise.

Choosing a quality product for the 2005-2012 model requires attention to detail: the geometry of curvature, the presence of places for sensors and the type of glass. An incorrectly selected part can cause distorted vision, difficulty installing wipers, and even problems with sealing when washing.

In this article we will analyze all the nuances of selection, consider the difference between factory and analog options, and also describe in detail the installation process, taking into account design features Nissan Note E11.

Geometry and parameters of the windshield for Nissan Note E11

The windshield for the E11 body has a unique shape that differs from the newer E12 generation. The main difference is the height and angle of inclination, as well as the location of the mirror section (tinted strip) in the upper part. When ordering, it is necessary to check the body code, since even minor changes in modifications can affect the seat.

The key parameter is the type of curvature. The glass should fit tightly to the frame around the entire perimeter without gaps, which in the future will cause wind whistling or leaks. The standard glass thickness for this model is 4.76 mm (3+3), which is the norm for most B-Class cars of the period.

Particular attention should be paid to the presence of holes for mounting the rear view mirror and sensors. On some trim levels Nissan Note rain control systems or light sensors were installed, which require special “pockets” or thickenings in the glass.

• 🔍 The exact glass dimensions for E11 are usually around 1350mm in width and 600mm in height.
• 🛡️ Factory logo Nissan often present in the top corner, but its absence does not affect functionality.
• ⚙️ Glass can be either with a mirror coating (silver stripe) or without it, depending on the year of manufacture.

It is important to check compatibility before purchasing as some glasses are... Renault Symbol or other Alliance models may have similar contours but differ in curvature at the bottom, making installation impossible.

⚠️ Attention: Never buy glass “by eye” based on a photo from the Internet. Even invisible differences in the bending radius can lead to the fact that when gluing you will get a leaky seam that will allow water to pass through even after the sealant has dried.

Glass types: triplex, tempered and coated options

Most windshields for passenger cars, including Nissan Note E11, are manufactured using triplex technology. This is a multilayer structure consisting of two sheets of glass glued together with a polymer film. It is the film that holds the fragments upon impact, preventing them from scattering and injuring passengers.

There are several main manufacturers whose products are on the market. Factory glass is often marked with logos Asahi Glass, Pilkington or Fuyao, since the Nissan concern uses supplies from these giants. High-quality original glass ensures minimal optical distortion, which is critical for night driving.

In addition to the basic options, there are glass with additional properties: heated (transparent heating filaments), with an athermic coating (a green tint that reflects IR rays) or with a hydrophobic layer (water rolls off on its own). For Nissan Note athermal glass is an excellent choice for reducing the load on the air conditioner.

• 🌡️ Athermic glass reduces the temperature in the cabin by 3-5 degrees in hot weather.
• 💧 Hydrophobic coating accelerates the removal of water from the windshield at speeds above 60 km/h.
• 🔊 Noise suppression film inside the triplex reduces aerodynamic noise by 2-3 dB.

Tempered glass on the front part Nissan Note E11 is not installed, since when destroyed it turns into small fragments that can cause serious injury. Therefore, when replacing, make sure that you are purchasing triplex.

Features of installation and sealing

Windshield replacement process Nissan Note requires careful preparation. First you need to dismantle the wipers, the plastic trim (frill) under the windshield and the plastic cover of the rear view mirror. On some versions, it is also necessary to disconnect the rain sensor connector, if provided.

The key step is to remove the old sealant. You need to use a sharp knife or scraper very carefully so as not to damage the paintwork of the body and not leave deep scratches on the metal where the new sealant will be applied. The cleaned surface must be degreased with a special primer.

New sealant should be applied in a continuous line. For Nissan Note E11 It is important to consider that the glass has a specific angle of inclination, so the seam must be uniform over the entire area. After installation, the glass is fixed with masking tape during polymerization.

The drying time of the sealant depends on temperature and humidity. On average it takes from 2 to 24 hours. During this period, the car should not be pressure washed or operated in conditions of strong vibrations.

• 🚫 Do not open or close the doors sharply immediately after installation, so as not to disturb the geometry of the seam.
• 🌡️ The ideal temperature for working with sealant is from +10°C to +30°C.
• 🛠️ Use only polyurethane sealant specifically designed for auto glass.

⚠️ Attention: If you are installing glass with rain sensors, be sure to check the operation of the system before finally gluing the mirror and assembling the decorative trims. Skipping this step may result in the need for repeated disassembly.

What to do if the glass cracks during installation?

If the crack appears due to improper tension during installation, the glass must be replaced. Do not attempt to glue it in place as this will compromise the structural strength and optical properties. Contact professionals for a turnkey replacement to avoid distortions.

Repairing chips and cracks

Not every damage requires a complete windshield replacement. If the chip is no larger than a 5 ruble coin, and the crack is no longer than 10-15 cm and is located outside the wiper operating area, you can try to restore the integrity.

The repair process involves cleaning the damage, pumping air out of the crack and filling the cavity with a special polymer composition under pressure. After this, the repair area is polished, and the difference in transparency becomes minimal.

However, if the crack is off-center or on the edge of the glass, repairs may be ineffective or even dangerous as the glass loses its structural integrity. In the case of Nissan Note E11 It is worth considering that thin glass is more sensitive to vibrations.

• ✅ Repairing a chip takes about 30-40 minutes and costs significantly less than replacement.
• ⛔ Repair is not recommended if the damage is in the area of the rain sensor or camera.
• 🔧 High-quality repairs restore up to 90% of the strength of the glass at the point of damage.

The decision to repair or replace must be made based on the nature of the damage. Sometimes it is cheaper and more reliable to replace the glass right away than to waste money on attempting a repair that will not fix the crack in the future.

Pricing policy and supplier selection

Windshield cost for Nissan Note E11 varies over a wide range. An original from a dealer can cost 2-3 times more than a high-quality analogue from well-known brands, such as AGC, Steko or Cardon. The difference in price is not always justified, since the quality of analogues is often not inferior to factory samples.

When choosing a supplier, it is important to pay attention to the availability of quality certificates and guarantees. Cheap Chinese glass can have poor transparency, distort the colors of traffic lights and quickly become cloudy when exposed to ultraviolet radiation. This directly affects your safety.

It is also worth considering the cost of installation work. In specialized services, the turnkey price often includes dismantling, body preparation, sealing and assembly. This may be more profitable than buying glass and looking for a specialist separately.

Manufacturer	Type	Approximate price (RUB)	Features
Nissan (OEM)	Original	18 000 - 25 000	Perfect geometry, logo
Asahi / Pilkington	High-quality analogue	8 000 - 12 000	High transparency, reliability
Steko / Cardon	Middle segment	5 000 - 7 500	Good price/quality ratio
Budget brands	Economy	3 000 - 4 500	Possible optical distortion

Don't skimp on safety. High-quality glass provides clear visibility and protection in case of an accident, which cannot be compensated by saving a couple of thousand rubles. Always check the packaging and labeling on the product itself before installation.

Frequent errors during operation and maintenance

Many owners Nissan Note make mistakes that shorten the life of the windshield. One of the most common is the use of windshield wipers with damaged rubber. Old rubber scratches the surface, creating micro-scratches that accumulate dirt over time and impair visibility.

It is also dangerous to use dry wipers. If the glass is dirty or icy, turning on the wipers can cause deep scratches or even chips from frozen dirt. Always use washer fluid, even in cold weather.

Another problem is the use of harsh chemicals to clean glass. Some compounds can corrode rubber seals or harm the polymer layer of triplex. Use only specialized car shampoos and microfiber.

• 🚿 Wash glass regularly outside and inside to maintain transparency.
• ❄️ In frosty conditions, pre-warm the interior before turning on the wipers.
• 🧴 Do not use household glass cleaners, they may leave streaks.

Replacing your windshield wiper blades promptly (every 6-12 months) will extend the life of your glass and provide clear vision in any weather. Clogged wipers are the main cause of streaks and streaks.

⚠️ Attention: Do not attempt to scrape off ice with an ice pick or a hard scraper with a metal blade. Use only plastic scrapers and warm liquid, otherwise you risk getting a network of cracks throughout the glass.

FAQ: Answers to frequently asked questions from owners

Do I need to reprogram the sensors when replacing glass?

If you are replacing a rain sensor glass with the same or a similar one in the same location, reprogramming is usually not required. However, if the sensor geometry is different, sensitivity calibration may be required via a diagnostic scanner.

Is it possible to install Nissan Tiida glass on Note E11?

No, despite the fact that both cars belong to the same concern, the geometry of the glass and the location of the fasteners differ Titida and Note E11 varies. Installing incompatible glass will lead to leaks and seal failure.

How long does it take for sealant to dry after replacement?

The initial setting time is about 1-2 hours, but complete drying and achievement of maximum strength takes up to 24 hours. During this period, it is better not to operate the car at high speeds and not to wash it.

What should I do if a whistle appears after replacing the glass?

Whistling most often occurs due to a loose fit of the glass to the body or improper installation of the sealing rubber. It is necessary to check the tightness of the seam and, if necessary, tighten the fasteners or add sealant.

Is it possible to drive with a crack in the windshield?

The law prohibits the operation of a vehicle with cracks on the driver's side that impair visibility. In addition, the crack can expand at any time, resulting in loss of glass strength and danger to life.