Nissan Consult 3 for Scanmatic 2: how to download and install for free in 2026

Car diagnostics Nissan using an adapter Scanmatic 2 requires specialized software - Nissan Consult 3 (or its modified versions to work with Chinese clones). Many car owners are looking for opportunities download this software for free, but face risks of viruses, broken links, or compatibility issues. In this article, we will look at where to find the latest versions of the program, how to install it correctly, and what pitfalls await when using unlicensed solutions.

It is important to understand: Consult 3 is a professional diagnostic tool, officially distributed only through dealerships Nissan or certified partners. Free versions available online are often hacked assemblies with limited functionality or reduced protocol support. However, for personal use (for example, error reporting or basic diagnostics), such solutions may be suitable - provided that security measures are observed.

In the material below you will find:

• 🔍 Official and alternative sources for download Consult 3 (including modifications for Scanmatic 2).
• 🛠️ Step by step instructions on installing and configuring the program for Windows 7/10/11.
• ⚠️ Risks of using pirated versions and how to minimize them.
• 📊 Functionality comparison original software and free analogues.

What is Nissan Consult 3 and why is it needed for Scanmatic 2

Nissan Consult 3 is a diagnostic software developed by Nissan for working with brand cars (including Infiniti and some models Renault). It allows:

• 🔧 Read and reset errors DTC (Diagnostic Trouble Codes) in all electronic control units (ECU).
• 📈 View parameters of the engine, transmission, ABS and other systems in real time (live data).
• 🔄 Program keys, adapt the throttle, carry out service procedures (for example, changing the oil in an automatic transmission).
• 🔄 Update ECU firmware (requires additional licenses and equipment).

Scanmatic 2 - this is a Chinese clone of the original adapter Nissan Consult 3 Plus, which connects to the car via OBD-II connector and connects to a PC via USB or Bluetooth. Unlike original equipment, Scanmatic 2 has no official support from Nissan, so it requires modified software versions or special drivers.

Important nuance: Consult 3 initially not intended to work with adapter clones. Free versions of the program that can be found on the Internet are often:

• 🔓 Hacked assemblies bypassing license verification.
• 🛠️ Modified versions (For example, Consult 3 Lite or Nissan DataScan), adapted to Scanmatic 2.
• 📦 Stripped-down demos with limited functionality (for example, without the ability to write parameters or program keys).

⚠️ Attention: Using unlicensed software may lead to blocking the car's ECU when trying to write data or update firmware. Working with blocks is especially risky ECM (Engine Control Module) and TCM (Transmission Control Module) - errors can make the car malfunction.

Where to download Nissan Consult 3 for Scanmatic 2 for free

Search for a working version Consult 3 for Scanmatic 2 - not an easy task. Most links on torrents or file hosting sites lead to outdated builds (2012–2015) that do not support new models Nissan (For example, Qashqai J11, X-Trail T32 or Ariya). Below are trusted sources where you can find current versions:

The most reliable way is to look for modified versions on closed diagnostic forums (For example, Diag.NET or ChipTuner Forum). Assemblies with:

• 🔧 Patches for working with Scanmatic 2 (for example, fixed drivers FTDI).
• 📋 Russified interface (Original software is in English/Japanese only).
• 🔄 Bypassing hardware key verification (to run without the original adapter).

When downloading from torrents or file hosting services (for example, Mega.nz, Google Drive) pay attention to:

• 📅 Build date — versions older than 2018 do not support new protocols (for example, CAN FD for Nissan Leaf 2020+).
• 💾 File size — the full version weighs ~1–1.5 GB (small archives are most likely truncated).
• 🛡️ Availability of digital signature — pirated assemblies often replace system files, which can cause conflicts with the antivirus.

Step-by-step instructions for installing Nissan Consult 3

Installation Consult 3 on a PC to work with Scanmatic 2 requires preliminary preparation of the system. Below are universal instructions suitable for most modified assemblies:

Disable antivirus (especially Avast/Kaspersky - they block patches)

Install .NET Framework 3.5 and 4.8 (via "Turn on Windows features")

Download and unpack the archive with the software to the root of drive C: (for example, C:\Nissan_Consult3\)

Connect Scanmatic 2 to a USB port (use the rear ports of the motherboard) -->

Step 1. Installing drivers for Scanmatic 2

Most connection problems are related to incorrect drivers. For Scanmatic 2 required:

1. Download driver FTDI (For example, from here).
2. Disconnect the adapter from USB.
3. Remove old drivers via Device Manager (if the adapter was defined as Unknown device).
4. Connect Scanmatic 2 and manually specify the path to the driver FTDI.

Step 2. Install Nissan Consult 3

Unpack the software archive and run the installer Setup.exe. During installation:

• Choose a path C:\Nissan\Consult-III\ (important for the correct operation of patches).
• Avoid installing additional components (for example, Nissan DataScan, if it is not needed).
• After installation, copy the files from the folder Crack or Patch to the directory with the program (replacing the original .dll And .exe).

Step 3. Connection setup

Run Consult 3 on behalf of the administrator. From the connection menu, select:

• Interface: USB (FTDI)
• Protocol: Auto (or ISO9141 for older models Nissan).
• Baud Rate: 9600 (for Scanmatic 2 this value is usually used).

If the adapter is not detected, check Device Manager, what COM port assigned to it, and manually specify it in the program settings.

⚠️ Attention: Some modified versions Consult 3 contain built-in VIN restrictions. If your car is newer than 2018, the program may not connect or show an error "Vehicle not supported". In this case, you will need to look for a newer build or use alternative software (for example, Nissan DataScan).

Compatibility of Nissan Consult 3 with Nissan models

Functionality Consult 3 depends not only on the program version, but also on diagnostic protocol, which supports your car. Below is the compatibility table for popular models:

For cars newer than 2018 (For example, Nissan Ariya, Qashqai J12, X-Trail T33) free versions Consult 3 often not suitable due to:

• 🔒 New encryption protocols (For example, UDS instead of KWP2000).
• 🔧 Modified ECU structure (for example blocks ECM with protection against unauthorized access).
• 📡 Updated diagnostic connectors (For example, DoIP instead of CAN).

In such cases, it is better to use alternative programs:

• 🔧 Nissan DataScan — supports new protocols, but requires a license (~$50).
• 🔧 Launch X431 - multi-brand scanner with support Nissan (there are free modifications).
• 🔧 Torque Pro + adapter ELM327 — for basic diagnostics (only reading errors).

1. Откройте Диспетчер устройств.
2. Найдите устройство с желтым восклицательным знаком.
3. Кликните правой кнопкой → Обновить драйвер → Выполнить поиск на этом компьютере.
4. Укажите путь к драйверу FTDI (например, C:\Nissan\Drivers\FTDI).
5. Перезагрузите ПК.