Nissan Juke: where are the fuses, block diagram and DIY replacement

Nissan Juke is a compact crossover with a bright design, but even it has electrical problems. Most often the culprit is the burnt out. fuses, which protect circuits from short circuits. If your headlight, windshield wiper or cigarette lighter does not work, first check the fuse boxes. In this article we will look at where they are located in Juke first (J10, 2010–2019) and second (J11, from 2019) generations, how to replace them correctly and what mistakes owners make.

Many car owners are at a loss when faced with electrical problems. Some people immediately go to the service center, others try to fix it at random - and often aggravate the problem. We have collected current fuse box diagrams for all Juke modifications, including hybrid versions, as well as detailed instructions with photos and videos. This will help save time and money by avoiding unnecessary visits to the service center.

Where are the fuse boxes in Nissan Juke?

B Nissan Juke There are two main fuse blocks:

• 🔧 Main unit in the cabin — located under the steering wheel, to the left of the pedals. To gain access, you need to unscrew the two plastic clips and remove the cover.
• ⚡ Additional block under the hood — located next to the battery (in models with gasoline engines) or in a special compartment (in hybrid versions). The lid is secured with latches.

B Juke J11 (2019–present), the arrangement of the blocks remains the same, but the pinout diagram has changed. For example, the cigarette lighter fuse in the new generation has moved from F30 on F25. Also in hybrid versions, a separate unit for the high-voltage system has appeared - it can be touched without special training prohibited.

If you can't find the block, please take a look at marking on the lid — there is usually a diagram with fuse numbers. As a last resort, use a flashlight: Juke the blocks are often hidden behind plastic panels, which are difficult to see in poor lighting.

Nissan Juke J10 (2010–2019) Fuse Diagram

In the first generation Juke (J10) The fuse diagram depends on the configuration and sales market. For example, in European versions the fuse F10 is responsible for low beam, and in American ones - for fog lights. Below is a universal table for most modifications:

Number	Ampere	Purpose	Note
F5	10A	Low beam (right headlight)	Also protects DRL
F15	15A	Cigarette lighter/socket 12V	Often burns out when connecting powerful devices
F20	7.5A	Audio system, navigation	If the screen does not work, check this fuse
F25	10A	Windshield wipers	Also responsible for the windshield washer
F30	20A	Heated seats	Only in configurations with the option

B Juke J10 with diesel engines (1.5 dCi) fuse added F35 (15A) for injection system Common Rail. If the engine does not start or runs rough, check this element first. Also pay attention to the relay K5 — it is responsible for the fuel pump and often fails when the quality of the diesel engine is low.

What should I do if the fuse blows again?

If after replacement the fuse immediately burns out, this is a sign of a short circuit in the circuit. Do not install a fuse with a larger rating - this may cause a fire! You need to check the wiring with a multimeter or contact a service center for diagnostics.

Fuse diagram for Nissan Juke J11 (2019–present)

In the second generation (J11) the manufacturer has revised the wiring diagram. Now the fuses are grouped more logically, and some circuits have received separate protection. For example, the system Nissan Safety Shield 360 (cameras, radars) connected via fuse F40 (10A).

• 🔋 F10 (10A) — Low beam (left headlight) + DRL
• 📱 F25 (15A) — Cigarette lighter and USB ports (instead of F15 as in J10)
• 🚗 F30 (20A) — Electric power steering (EPS)
• 🔦 F35 (10A) — Fog lights (front and rear)
• 🔌 F50 (30A) — Main relay of the ignition system

In hybrid versions Juke Hybrid added separate fuse block for high voltage system (HV). It is located under the rear seat and is covered by an orange cover with a warning sticker. Strictly prohibited interfere with this block without special equipment - the voltage there reaches 300V, which is deadly!

If in your Juke J11 The 360-degree cameras stopped working, check the fuse F45 (7.5A). It is also responsible for parking sensors. In case of malfunction do not replace it with a higher denomination - this may damage the control module.

How to properly replace a fuse in a Nissan Juke

Replacing a fuse is a simple procedure, but many owners Juke make mistakes that lead to serious damage. Here are the step-by-step instructions:

1. Turn off the ignition and remove the key from the lock. In hybrid versions, press the button POWER and wait until the system shuts down completely.
2. Open the fuse box cover. In the cabin it is secured with two clips, and under the hood with latches.
3. Find the faulty fuse. Usually he has burnt thread or melted body. If it is impossible to determine visually, use a multimeter in dial mode.
4. Remove the fuse with special pliers (they are in the block) or tweezers. Do not use metal tools - they can close the contacts.
5. Install a new fuse same denomination. Using a high ampere fuse may cause a fire!
6. Check the operation of the circuit. If the fuse blows again, look for a short circuit.

If the fuse F15 (cigarette lighter) burns out regularly, the problem may be:

• 🔌 Connecting powerful devices (for example, a compressor or inverter).
• 🔋 Short circuit in the cigarette lighter wiring.
• 🛠️ Malfunctions of the 12V outlet itself (contacts often oxidize).

In such cases, it is better to contact the service for diagnostics. Repairing wiring yourself without experience can lead to a fire.

Common mistakes when working with fuses

Many owners Nissan Juke make the same mistakes that lead to expensive repairs. Here are the most common:

⚠️ Attention: Never replace a fuse with a "bug" (wire or foil). This may cause a fire in the interior! B Juke It is especially dangerous to do this in circuits connected to EPS (electric power steering) and ABS.

• ❌ Using a larger fuse. For example, instead of 10A put 15A, thinking that “it’s more reliable this way.” This actually causes the wiring to overheat.
• ❌ Replacing a fuse without finding the cause. If it burns out, there is a problem in the circuit (short circuit, overload). A simple replacement without diagnostics will lead to re-combustion.
• ❌ Ignoring corrosion in the block. Oxidized contacts increase resistance, which can cause false fuses to trip.
• ❌ Working under voltage. Even if you are just checking the fuse with a multimeter, it is better to remove the battery terminal.

It is especially dangerous to experiment with fuses in hybrid versions Juke. For example, if you mix up the fuse F60 (responsible for the inverter) with another, it may damage the battery on 12V or even a high voltage system. In such cases, repairs will cost thousands of dollars.

If you are not sure of your actions, it is better to contact an authorized dealer Nissan. They have special electrical diagnostic scanners that show the exact cause of the problem.

How to check a fuse without a multimeter

Not everyone has a multimeter at hand, but you can check the fuse without it. Here are some ways:

• 👁️ Visual inspection. A blown fuse usually has a broken thread inside or a melted body. B Juke The fuses are translucent, so it's easy to see.
• 🔄 Replacing with a known good one. If the device worked after replacement, the problem was in the fuse. This method is suitable if you have spare fuses.
• 💡 Checking with a light bulb tester. You can assemble a simple tester from a light bulb 12V, batteries and two wires. If the light does not light when connected to the fuse, it has burned out.

B Nissan Juke J11 some fuses (eg F40 for a security system) have built-in indicators. If the indicator does not light, the fuse is faulty. This simplifies diagnostics, but such fuses are more expensive than conventional ones.

If you are checking the fuse F20 (audio system), please note fuse in the radio itself. Sometimes the problem lies there, and not in the main unit. B Juke with the system NissanConnect This fuse is located on the back of the head unit.

Where to buy fuses for Nissan Juke

Fuses for Nissan Juke They are sold in any auto store, but not all of them are the same in quality. Here's what you need to know when purchasing:

• 🛒 Original fuses Nissan. They are sold in dealerships, but are more expensive than analogues. But they are guaranteed to fit in size and material.
• 🔧 Analogues from Bosch, Hella, Valeo. High quality and cheap options. The main thing is to check the denomination and type (in Juke fuses are used mini blade).
• ⚠️ Cheap Chinese fuses. They often have poor-quality contacts that oxidize over time. It's better not to save money.

The table below shows the average prices for fuses for Juke in Russia (for 2026):

Type	Denomination	Original (Nissan)	Analogue (Bosch/Hella)
Mini Blade	5A	120–150 ₽	40–60 ₽
Mini Blade	10A	100–130 ₽	30–50 ₽
Mini Blade	15A	90–120 ₽	25–45 ₽
Mini Blade	20A	110–140 ₽	35–60 ₽
Maxi Blade	30A	200–250 ₽	80–120 ₽

When purchasing, pay attention to fuse color - it corresponds to the nominal value:

• 🟠 Orange - 5A
• 🔴 Red - 10A
• 🔵 Blue — 15A
• 🟡 Yellow - 20A
• 🟣 Purple - 30A

If you buy fuses online (for example, Wildberries or Ozon), check reviews. There are times when sellers send fuses of the wrong rating, but with the correct color.

FAQ: Frequently asked questions about fuses in Nissan Juke

Why does the cigarette lighter fuse keep blowing on my Juke?

This is a big problem Juke, especially if you connect powerful devices (for example, a car vacuum cleaner or an inverter). Reasons:

• Excess load (more 120W for 10A fuse).
• Short circuit in the socket (oxidation of contacts).
• Poor quality fuse (Chinese analogues often do not maintain the nominal value).

Solution: Use a power strip with its own fuse or connect high-power devices directly to the battery.

Is it possible to replace a fuse on a Juke yourself if you have no experience?

Yes, replacing a fuse is one of the simplest procedures. The main thing:

1. Turn off the ignition.
2. Use fuse same denomination.
3. Do not use metal tools for removal.

If the fuse burns out again, it is better to contact service.

Where can I find the fuse diagram for my Juke?

The diagram is usually printed on back side of the block cover. If it's not there:

• For J10 (2010–2019) - download official manual (section Fuse Box).
• For J11 (2019–present) - check the sticker on the block or use Nissan website (enter VIN).

There are also diagrams on the forums (Drive2, Juke-Club.ru).

What should I do if the device does not work after replacing the fuse?

Possible reasons:

• The fuse is not making contact with the connector (check that it is inserted tightly).
• The problem is not the fuse, but the relay or wiring.
• The consumer itself has burned out (for example, a light bulb in a headlight or a windshield wiper motor).

Check the circuit with a multimeter or contact an electrician.

Can fuses from other cars be used in the Juke?

Yes, if they match:

• Tipu (mini blade for most circuits).
• Denomination (for example, 10A instead of 10A).
• Size (in Juke standard fuses are used, as in most Japanese cars).

Fuses of the type are not suitable maxi or ATO (they are larger in size).