Wheel sizes for Nissan Almera: compatibility table and selection tips

Wheel selection for Nissan Almera - a task that requires attention to detail. The wrong size wheels or tires can lead to handling problems, increased fuel consumption and even damage to the suspension. In this article we will analyze the original wheel parameters for all generations Almera (including G15, N18 And B17), acceptable analogues, as well as typical mistakes that owners make when replacing.

We will pay special attention tire sizes (width, profile, diameter), disk parameters (offset, PCD, hub diameter) and compatibility with different car modifications. If you plan to install non-standard wheels - for example, with an increased diameter or offset - here you will find a checklist for checking the safety of such tuning.

Original wheel sizes for Nissan Almera by generation

Factory wheel parameters depend on the year of manufacture and configuration Almera. Below is a table with data for the most common versions:

Generation	Years of manufacture	Tire size (original)	Disc size (original)	PCD (bolt pattern)	Departure (ET)	Hub Diameter (DIA)
B17 (2019–present)	2019–2026	185/65 R15 195/55 R16	6Jx15 ET45 6.5Jx16 ET45	4×100	45 mm	60.1 mm
G15 (2012–2018)	2012–2018	185/65 R15 195/55 R16	6Jx15 ET40 6.5Jx16 ET40	4×100	40 mm	60.1 mm
N18 (2006–2012)	2006–2012	185/60 R15 195/50 R16	6Jx15 ET38 6.5Jx16 ET38	4×100	38 mm	60.1 mm

Please note: for Almera Classic (sold in some countries), other settings may be used. For example, on versions with engine 1.6 l sometimes disks were installed 5.5Jx14 ET40 with tires 175/70 R14. Check the details for your modification in instruction manual or on a sticker in the driver's doorway.

If you are unsure of the size, check the markings on the sidewall of the tire or the inside of the rim. For example, the inscription 6.5Jx16 ET45 4×100 DIA60.1 means:

• 📏 6.5Jx16 — rim width 6.5 inches, diameter 16 inches.
• ⚖️ ET45 — offset 45 mm (positive).
• 🔧 4×100 — bolt pattern for 4 bolts with a circle diameter of 100 mm.
• 🕳️ DIA60.1 — diameter of the central hole is 60.1 mm.

Acceptable analogues: what sizes can be used instead of the original ones?

Many owners Nissan Almera they want to install larger wheels - to improve appearance or handling. However, not all combinations are safe. Here are the basic rules:

• 🔄 Diameter: Can be increased by 1-2 inches, but The overall outer diameter of the wheel (tires + rim) must remain within ±3% of the original. For example, instead of 185/65 R15 (diameter 621 mm) can be supplied 205/50 R16 (621 mm) or 195/60 R15 (624 mm).
• 📐 Width: An increase of 10–20 mm is allowed (for example, from 185 to 195 or 205), but no more. Tires that are too wide can rub against the arches or suspension.
• ⚖️ Departure (ET): Can be changed ±5mm from the original. For example, if the normal departure ET45, then ET40 or ET50 acceptable, but ET30 - already risky (the load on the wheel bearing will increase).

To check compatibility use wheel size calculator (for example, on sites TyrePlus or WillTheyFit). Enter the original parameters and compare them with the desired ones. If the difference in diameter exceeds 3%, it will lead to malfunctions ABS, speedometer and increased fuel consumption.

⚠️ Attention: On Almera G15/N18 with engine 1.5 l It is not recommended to install disks with a diameter larger than R17 - this can lead to overheating of the brake mechanisms due to insufficient cooling.

Examples of successful combinations for Almera B17 (2019–present):

• 🔹 195/60 R15 (alternative 185/65 R15) - slightly wider, but retains the diameter.
• 🔹 205/50 R16 (alternative 195/55 R16) — sports version with low-profile tires.
• 🔹 185/60 R16 (for winter tires) - high sidewall improves comfort on uneven surfaces.

Make sure the hub diameter (DIA) is the same as the original (60.1mm)

Check the bolt pattern (4×100) - other options will not work

Use spacers only as a last resort (increase load on bearings)

Check the clearance between the tire and the arch when turning the steering wheel completely-->

Bolt pattern and center hole: why is it important?

Two key parameters that are often overlooked are bolt pattern (PCD) And center hole diameter (DIA). For all generations Almera the bolt pattern is the same: 4×100. This means that the disk is mounted on 4 bolts located around a circle with a diameter of 100 mm.

If you buy a disc with a different bolt pattern (for example, 4×114.3like many Toyota), it will not be possible to install it without adapters. And adapters are risk: They increase the load on the hub and can lead to vibrations or even the wheel coming off at high speed.

Central hole (DIA) for Almera — 60.1 mm. If the disc has a larger hole (for example, 67.1 mmlike Volkswagen), it can be installed using centering rings. However, if the hole is smaller, the disc simply will not fit onto the hub.

⚠️ Attention: Some sellers claim that the bolt pattern 4×100 And 4×114.3 "almost identical". This is a dangerous misconception! A difference of 14.3 mm will result in only 2 of the 4 bolts being tightened correctly, and the rest being misaligned.

How to check the bolt pattern yourself?

1. Remove one wheel and measure the distance between the centers of two adjacent bolts (using a caliper, for example).
2. Multiply this value by 1.414 (for 4 bolts). For example, if the distance between the bolts is 70.7 mm, then 70.7 × 1.414 ≈ 100 mm - this is PCD.

What happens if you ignore the bolt pattern?

If the PCD misaligns, the disc will not fit tightly to the hub. This will lead to:

- Steering wheel beating at speeds above 80 km/h.

- Uneven wear of tires and wheel bearings.

- Risk of the wheels turning loose while driving (especially when driving over uneven surfaces).

Disk ejection (ET): why can’t you install “whatever”?

Departure (ET) is the distance from the mating plane of the disk to its central axis. For Nissan Almera original offset varies from ET38 to ET45 depending on the generation. Changing this setting affects:

• 🚗 Controllability: Too much overhang (ET50+) narrows the track, worsening cornering stability.
• 🔧 Suspension load: Low offset (ET30) increases leverage, which accelerates wheel bearing wear.
• 🛑 Legality: In Russia and the countries of the Customs Union, the offset must correspond to the original (deviation ±5 mm is allowed). Otherwise, the car will not pass inspection.

Example: if on Almera G15 with original offset ET40 install disks ET30, the wheels will move outward by 10 mm. This will lead to:

• 🔴 Increasing the track width (may hit the arches when the steering wheel is turned completely).
• 🔴 Increased load on the steering rack and ball joints.
• 🔴 Risk of the tire getting caught on the fender liner when driving through potholes.

How to check if a flight is suitable? Take a ruler and measure the distance from the inner edge of the disk to the hub. Compare with the original value. If the difference is more than 5 mm, such a disc cannot be installed.

Winter and summer tires: what sizes are optimal?

For winter use Nissan Almera it is recommended to use tires with higher profile (For example, 185/65 R15 instead of 195/55 R16). This improves:

• ❄️ Patency on snow due to the higher sidewall height.
• 🛣️ Comfort on uneven surfaces (less risk of disc damage).
• 🚗 Controllability on ice (narrow tires “crash” into an icy road better).

For summer tires, on the contrary, they often choose low profile tires (For example, 205/50 R16). They provide better directional stability and steering precision, but are less comfortable on bad roads.

Important: if you use studded tires, their width should not exceed the original by more than 10 mm. For example, for Almera B17 with the original 185/65 R15 maximum winter tire width - 195 mm. Wider studs can damage the road surface and reduce handling.

Season	Recommended size (G15/B17)	Recommended size (N18)	Notes
Winter (Velcro)	185/65 R15 175/70 R14*	185/60 R15 175/65 R15	*Only for versions with 1.4 l engine
Winter (spikes)	185/65 R15 195/60 R15	185/60 R15 185/55 R16	Width no more than +10 mm from the original
Summer	195/55 R16 205/50 R16	195/50 R16 185/60 R15	For sporty driving - low profile tires

⚠️ Attention: On Almera N18 With ABS it is not recommended to install tires with a speed index lower H (210 km/h). This can lead to false alarms when braking.

Wheel tuning: what is possible and what is not?

Many owners Nissan Almera want to give the car a sporty look with large wheels. However, there are limitations:

• 🚘 Max diameter: For G15/B17 — R17 (with tires 205/45 R17). Larger wheels will require modification of the arches or changes in ground clearance.
• 🎨 Color and design: You can select any wheels (forged, cast, stamped) if their parameters match the original.
• 🔧 Spacers: Allowed only if the disc offset is greater than the original (for example, ET50 instead of ET45). Spacers to reduce offset (ET30) are dangerous!

An example of successful tuning for Almera B17:

• 🔹Disks: 7Jx17 ET45 (bolt pattern) 4×100, DIA60.1).
• 🔹 Tires: 205/45 R17 (speed index V, load index 88).
• 🔹Additional: short-stroke spring (lower by 30 mm) to improve appearance.

What not to do:

• ❌ Install disks with PCD 4×114.3 or 5×112 (even with adapters).
• ❌ Use tires with a load index lower than the original (for example, 82 instead of 88).
• ❌ Install wheels with negative offset (ET0 or ET-10) without modification of the suspension.

Where to buy wheels for Nissan Almera: proven methods

When purchasing wheels for Almera It is important to avoid fakes and low-quality discs. Here are reliable options:

• 🛒 Official dealers Nissan: Guarantee of original parameters, but high price.
• 🌍 Online stores:
  • 🔹 Kolesa.ru — a large catalog with filters by car.
  • 🔹 Shina.ru - convenient selection by size and season.
  • 🔹 Exist.ru - to search for rare sizes.
• 🏬 Local tire shops: They often offer used wheels in good condition at a low price.

When purchasing used drives, be sure to check:

1. No cracks (especially on the spokes and rim).
2. Evenness of landing (turn the disk on a balancing machine).
3. The condition of the bolt threads (there should be no breakage or corrosion).

For tires, pay attention to:

• 📅 Production date (no older than 3–4 years, even if the tires are new).
• 🔍 Speed and load index (must match the original or be higher).
• 🌡️ Seasonality (Do not use all-season tires in areas with harsh winters).

💡

When purchasing tires online, always check with the manufacturer to see if they fit your model. For example, on Almera G15 tires with markings are not recommended XL (reinforced), if they are not provided by the factory.

FAQ: Frequently asked questions about wheels for Nissan Almera

Is it possible to install wheels from Renault Logan on the Almera G15?

Yes, but with reservations. Renault Logan (2nd generation) has the same bolt pattern 4×100 And DIA60.1, but the original flight Logan — ET50, and Almera G15 — ET40. If the difference is more than 5 mm, discs cannot be installed. Also check the rim width: Logan disks are often used 5.5J, whereas Almera requires 6J.

What pressure should the Almera B17 tires have?

Recommended pressure for Almera B17:

• 🔹 Front wheels: 2.2 bar (for size 185/65 R15).
• 🔹 Rear wheels: 2.0 bar.
• 🔹 When fully loaded: increase the pressure by 0.2–0.3 bar.

The exact values are indicated on the sticker in the driver's doorway.

What happens if you put tires of a different size, but with the same outer diameter?

If the outer diameter of the wheel (tires + rim) remains the same, then:

• ✅ Speedometer and odometer will show correct values.
• ✅ ABS And ESP will not trigger falsely.
• ⚠️ However, changing the tire width or profile may affect:
  • Fuel consumption (wide tires increase drag).
  • Handling (low profile tires are stiffer, but more accurate in corners).
  • Suspension wear (heavy discs accelerate shock absorber wear).

Is it possible to install R17 wheels on Almera N18?

Technically possible, but with caveats:

• 🔹Low profile tires will be required (e.g. 205/40 R17).
• 🔹 It is necessary to check the gap between the tire and the arch when turning the steering wheel completely.
• 🔹 The load on the suspension will increase due to the greater weight of the discs.
• 🔹 The wheel bearings may need to be replaced with reinforced ones.

For daily use it is better to stay on R16.

How often do you need to change tires on Almera?

Tire life depends on operating conditions, but on average:

• 🔹 Summer tires: 4–5 seasons or 40–50 thousand km.
• 🔹 Winter tires: 3–4 seasons or 30–40 thousand km (studded ones wear out faster).
• 🔹 Signs of wear:
  • Remaining tread depth less 1.6 mm (for summer) or 4 mm (for winter).
  • Cracks on the side.
  • Uneven wear (signal of wheel alignment violation).