Nissan Almera is one of the most popular sedans in Russia, but the choice of wheels for this model often raises questions. An error in the parameters can lead to vibrations, premature wear of the suspension, or even denial of warranty service. In this article we will analyze official rim sizes for all generations Almera (N16, G15, B17), including rare configurations, and we will also tell you how to avoid common mistakes when selecting.

Few people know, but even discs with the same diameter may differ departure (ET), bolt pattern (PCD) and the central hole (DIA). For example, disks from Nissan Almera Classic (B17) will not fit Almera G15 without adapters, although they look similar in appearance. We have collected current data from factory manuals and the experience of owners so that you don’t have to guess at the tea leaves.

Wheel parameters for Nissan Almera N16 (2000–2006)

First generation Almera N16 (also known as Pulsar in some countries) was equipped with wheels with a classic bolt pattern 4×114.3, which makes it similar to most Japanese cars of that time. However, there are nuances here:

  • 🔧 Standard size: 15×6.0J with departure ET45 and central hole 66.1 mm.
  • ⚠️ Dangerous error: Discs with ET40 will visually stand up, but will increase the load on the wheel bearings.
  • 🔄 Alternative: On versions with engine QR20DE discs allowed 16×6.5J ET40, but only with low-profile tires.

Interesting fact: on Almera N16 with automatic transmission, sometimes discs with ET50 to improve handling, but this is not documented by the factory. If you find such discs on the used market, check them for runout before purchasing.

📊 What generation of Almera do you have?
  • N16 (2000–2006)
  • G15 (2012–2018)
  • B17 (2018–2026)
  • Other

Nissan Almera G15 (2012–2018): wheel sizes by trim level

Almera G15 - this is a version adapted for Russia Nissan Sunny, and here the manufacturer used more modern standards. Basic disk parameters:

Equipment Disk size Bolt Pattern (PCD) Departure (ET) Center Hole (DIA)
Comfort 15×6.0J 4×100 ET45 66.1 mm
Elegance 16×6.5J 4×100 ET40 66.1 mm
Tekna 17×7.0J 4×100 ET38 66.1 mm

Important: you cannot install disks with PCD 4x114.3 on the G15 (as on the N16), despite the visual similarity! This will lead to uneven tightening of the bolts and the risk of the wheel coming off at high speed.

For owners Almera G15 with engine HR16DE (109 hp) installation of disks is allowed 17×7.0J ET35, but only with tires 205/50 R17. In this case, it is necessary to check the gaps in the arches with the steering wheel turned completely.

⚠️ Attention: On machines with the system ESP use of discs with abnormal offset (ET < 38) may cause false sensor alarms. This is due to a change in the rolling shoulder.

Nissan Almera B17 (2018–2026): factory and permissible dimensions

Third generation Almera (index B17) returned the bolt pattern 4×114.3, but with an enlarged central hole. This made it possible to unify the disks with other models Nissan-Renault, for example, Kicks or Duster.

  • 📏 Basic equipment: 15×6.0J ET45 (DIA = 66.1 mm).
  • ⚡ Sports package: 17×7.0J ET38 with tires 205/50 R17.
  • 🔧 Acceptable upgrade: Discs 18×7.5J ET35, but check for compatibility with brake mechanisms is required (on versions with ABS + EBD touching is possible).

Feature Almera B17 — sensitivity to wheel imbalance. Even with a slight departure deviation (ET ±3 mm) at speeds above 120 km/h, the steering wheel may vibrate. Therefore, when purchasing used disks, be sure to check them for radial and axial runout.

☑️ Checking disks before purchasing

Done: 0 / 4

How to correctly measure disk parameters yourself

If you're buying discs secondhand or are unsure about the markings, here's how to check key parameters without a special tool:

  1. Bolt Pattern (PCD):

    Measure the distance between the centers of two adjacent holes (for example, L = 100 mm). For 4 bolts PCD = L. For 5 bolts PCD = L × 1.051.

  2. Departure (ET):

    Place the disc on a flat surface, attach a ruler to the rim and measure the distance to the plane of contact with the hub. Divide in half and compare with the original ET.

  3. Center Hole (DIA):

    Use a caliper or a coin of known diameter (for example, 2 rubles = 25.5 mm). The hole should be ≥ 66.1 mm, otherwise the disc will not fit on the hub.

For accuracy it is better to use laser meter or contact a tire shop. An error of even 1–2 mm in the offset can lead to accelerated wear of the bearings.

⚠️ Attention: On Almera G15 With ABS, you cannot use wheels with magnetic inserts (for example, for tire pressure sensors). This will cause interference with the anti-lock braking system.

Common mistakes when choosing disks and how to avoid them

Even experienced car owners sometimes make mistakes. Here are the most common mistakes and ways to prevent them:

  • 🔄 "This will do": Installing disks with PCD 4×100 on Almera B17 (where necessary 4×114.3) using extended bolts. This is dangerous because the bolts will not be tightened evenly.
  • ⚖️ Ignoring crash: Discs with ET30 instead of ET45 will move the wheel outward, increasing the load on the suspension by 15–20%.
  • 🔧 DIA mismatch: If the center hole is smaller than 66.1mm, the disc will not seat on the hub. If more, centering rings will be required.

To avoid running into a fake, check the discs for:

  • 🏷️ Availability certificate of conformity (for Russia - sign E22 or PCT).
  • 🔍 Marking on the inside (all parameters must be indicated: size, PCD, ET, DIA).
  • ⚖️ Weight: original wheels weigh no less than 6.5 kg (for R15) and no more than 9 kg (for R17).
💡

When purchasing discs by hand, ask the seller to present a receipt or document confirming the origin. Often on the market they sell wheels after an accident with hidden cracks.

Is it possible to install larger diameter wheels?

Increasing the diameter of disks is a popular tuning, but Almera there are strict restrictions:

Model Max. diameter without modifications Terms
N16 R17 Only with tires 205/45 R17 and departure ET38–40.
G15 R18 It is necessary to check the gap with the brake caliper (on versions with ABS touching is possible).
B17 R18 Allowed only with tires 215/45 R18 and departure ET35.

When installing disks R18 on Almera G15/B17 required:

  1. Check ground clearance in the arches with the steering wheel turned completely.
  2. Calibrate ESP And ABS (on some versions there is an error C1130).
  3. Use tires with low profile load index not lower than 91T.
⚠️ Attention: On Almera B17 with engine H4M (1.6 l) wheels R18 may hit the suspension springs when the vehicle is fully loaded. Check the lift clearance before purchasing.

Where to buy wheels for Nissan Almera: proven options

The choice of place to purchase depends on your budget and goals:

  • 🏬 Official dealers:

    Pros: guaranteed compatibility, original discs Nissan (article, for example, 40500-4M000 for G15).

    Cons: the price is 1.5–2 times higher than the market price.

  • 🛒 Online stores:

    We recommend: Kolesa-Darom, Shina.ru, Autodoc. Look for discs marked "selection by car" and a PCD filter.

  • 🔄 Used market:

    Dangerous, but rare discs can be found (eg. R17 ET35 for N16). Check on hidden cracks ultrasonic flaw detector.

Average prices for new wheels (2026):

  • R15 (steel) - from 3,500 ₽/piece.
  • R16 (light alloy) - 8,000–12,000 RUR/piece.
  • R17 (original) - 15,000–20,000 RUR/piece.
💡

When purchasing discs online, always check the part number with the manufacturer's database. For example, for the Almera G15, the original wheels have the prefix 40500- or 40510-.

FAQ: Frequently asked questions about wheels for Nissan Almera

Is it possible to install wheels from Renault Logan on Almera G15?

Yes, but only if it Renault Logan II (2014–2020) with bolt pattern 4×100 and D.I.A. 66.1 mm. Discs from Logan I (PCD 4×100, but DIA = 60.1 mm) will not fit without centering rings.

What happens if you install wheels with an offset of ET30 instead of ET45?

The wheel will move outward by 15 mm, which will lead to:

  • Accelerated wear of wheel bearings (30–40% faster).
  • There is a risk of the tire hitting the fender liner when turned completely out.
  • Incorrect speed sensor readings (error P0500).
What is the maximum reach that can be installed on the Almera B17?

Allowed ET50 (for example, winter steel wheels), but:

  • The track will decrease, which will worsen stability at high speed.
  • There may be contact with the brake caliper (check on a lift!).
Do I need to balance disks after replacement?

Definitely! Even new discs can have an imbalance of up to 15–20 grams. On Almera recommended dynamic balancing (cost ~500 ₽/wheel), since static does not eliminate axial runout.

Can wheels be powder coated?

Yes, but:

  • Must be removed before painting balancing weights.
  • The thickness of the paint layer should not exceed 0.1 mm (otherwise the balancing will be disrupted).
  • After painting, re-balancing is required.

Don't paint the wheels at home spray can - this will lead to an uneven layer and corrosion.