Owners and potential buyers Nissan Almera Classic are often faced with the question of the exact dimensions of a car - especially when it comes to body width. This characteristic is critical for everyday use: from choosing a parking space to driving in narrow yards or garages with limited space. Unlike modern models, Almera Classic (also known as Nissan Almera N16 or B10 depending on the market) has compact but not always intuitive proportions that can be misleading.
In this article we will analyze not only the official data on width Almera Classic (including and without mirrors), but also compare them with class competitors sedan B. You will learn how dimensions affect maneuverability, what hidden nuances should be taken into account when buying a used model (for example, the difference in width between restyled versions), and also get practical advice on parking and transporting goods. For clarity, we provide tables, photos and answers to frequently asked questions.
Official dimensions of Nissan Almera Classic: width and other parameters
According to technical documentation Nissan, Almera Classic (body N16 or B10, depending on the year of manufacture) has the following key dimensions:
- 📏 Width excluding mirrors: 1,695 mm (standard for all modifications).
- 🪞 Width including mirrors: ~1,920–1,950 mm (depending on the position of the mirrors and their design).
- 🚗 Wheelbase: 2,535 mm - affects stability and comfort when driving.
- 📐 Length/height: 4,485 mm and 1,435 mm, respectively (for the sedan).
It's important to note that Almera Classic in the back B10 (produced from 2006 to 2018 for the CIS and Asian markets) maintained identical dimensions throughout its entire life cycle. However, after the 2013 restyling, minor changes appeared in the design of bumpers and mirrors, which could affect effective width when parking. For example, the new mirrors have become a little wider (by 10–15 mm), but this is not officially reflected in the documentation.
When measuring the width with mirrors, take into account their reach: when folded Almera Classic can fit into a 2 meter wide garage, but will require a minimum of 2.1 meters with the mirrors folded out.
| Parameter | Value (mm) | Notes |
|---|---|---|
| Body width (without mirrors) | 1 695 | Same for all modifications |
| Width with mirrors (parked) | 1 920–1 950 | Depends on the year of manufacture and configuration |
| Front wheel track | 1 470 | Affects cornering stability |
| Rear wheel track | 1 460 | Narrower than the front by 10 mm |
| Ground clearance (clearance) | 160 | Sufficient for urban conditions |
Comparison of the width of Almera Classic with class B competitors
To understand how much Almera Classic compact or large in its class, let’s compare it with the main competitors in the used car market:
- 🚘 Hyundai Accent (2006–2012): width 1,695 mm (same as Almera), but the mirrors are already 20 mm.
- 🚘 Kia Rio (2005–2011): 1,695 mm without mirrors, but the track is 10 mm wider, which improves stability.
- 🚘 Renault Logan (2004–2012): 1,730 mm - 35 mm wider, which is noticeable when parking.
- 🚘 Volkswagen Polo Sedan (2010–2015): 1,650 mm is narrower by 45 mm, but the interior is tighter.
As you can see, Almera Classic occupies the middle position in width. She's narrower than Renault Logan, but wider than VW Polo. This makes it a universal choice for the city: compact enough for narrow yards, but not cramped for passengers. However, there is a nuance: due to short wheelbase (2,535 mm) vehicle may feel less stable at high speeds compared to Logan or Accent.
- Width (for parking)
- Length (for maneuverability)
- Ground clearance (off-road)
- Trunk volume
How does the width of Almera Classic affect parking and operation?
In practice width 1,695 mm without taking into account mirrors allows Almera Classic Fits in most standard parking spaces (2.3-2.5 meters wide). However, there are several critical points:
⚠️ Attention: When parking in “pockets” with markings exactly 2 meters wide (for example, in some underground parking lots), unfolded mirrors can catch neighboring cars or walls. Always fold mirrors by hand if space is limited.
- 🅿️ Parallel parking: Thanks to the short front overhang (820 mm) and a width of 1.7 m, the car easily fits into standard 5-meter-long “pockets”.
- 🚪 Opening doors: in narrow garages (2.1–2.2 m wide), the rear passenger may have difficulty getting out - the door will hit the wall.
- 🛣️ Driving on narrow roads: on mountain serpentines or forest roads, a width of 1.7 m allows you to drive without the risk of catching bushes or fences.
Fold in the rear view mirrors|Check the distance to the curb (minimum 30 cm)|Make sure that neighboring cars do not interfere with the markings|Use the rear view camera (if equipped)-->
Interesting fact: despite its compact size, Almera Classic has trunk volume 490 liters - more than many competitors (for example, VW Polo Sedan - 460 l). This is achieved by a high trunk roof rather than by increasing the width of the body.
Restyled versions: has the width changed?
During production (2006–2018) Nissan Almera Classic experienced two significant restyling: in 2010 And 2013 years. However, officially body width remains the same — 1,695 mm. However, there are nuances:
- 🔄 Restyling 2010: The front and rear bumpers have changed, but the dimensions remain identical. The mirrors received a new shape, but their width did not increase.
- 🔄 Restyling 2013: There are new exterior mirrors with integrated turn signal indicators. Their Reach increased by 10–15 mm, which can be critical when passing through a narrow gate (for example, 2 meters wide).
- 🔧 Equipment: in top versions (for example,
TEKNA) electric mirrors were installed, which take up 5 mm less space when folded.
If you are planning to buy Almera Classic for use in confined spaces (for example, in a garage with a width of 2.1 meters), we recommend checking the year of manufacture and visually checking the width of the mirrors. For clarity, below is a table with the differences:
| Year of manufacture | Width of mirrors (unfolded) | Features |
|---|---|---|
| 2006–2009 | ~1 920 mm | Mirrors without repeaters, minimal offset |
| 2010–2012 | ~1 930 mm | New shape of mirrors, offset increased by 5–10 mm |
| 2013–2018 | ~1 950 mm | Turn signal repeaters in mirrors, maximum reach |
Practical tips: how to measure the width yourself
If you doubt the accuracy of the factory data or are planning tuning (for example, installing flared wheel arches), here's how to measure the width Almera Classic on your own:
- Preparation: Place the car on a level surface, make sure that the tire pressure is correct (usually
2.0–2.2 bar). - Body Measurement: use a tape measure or laser rangefinder. Measure the distance between the extreme points of the front and rear bumpers (excluding mirrors).
- Measurement with mirrors: Place the mirrors in their working position and measure the distance from the far left to the far right point.
- Checking the wheelbase: measure the distance between the centers of the front and rear wheels on one side - it should be ~2,535 mm.
⚠️ Attention: When measuring width with mirrors, take into account their angle of inclination. If the mirrors are deployed for better visibility (for example, when reversing), they may protrude an additional 20–30 mm.
For accuracy, we recommend taking measurements at three points:
- 📍 Along the front bumper (including fog lights, if any).
- 📍 Along the rear bumper (taking into account the protrusions for towing).
- 📍 Along the roof (between the extreme points of the door seals).
What to do if the width does not match the passport data?
If your measurements differ from the official ones by more than 20 mm, this may indicate:
- Body deformation after an accident (check the gaps between the doors and fenders).
- Installation of non-standard bumpers or arch extensions.
- Error in measurements (for example, if the machine is on a slope).
In such cases, we recommend carrying out computer diagnostics of the body geometry at a service station.
Tuning and modifications: how width affects upgrade options
Many owners Almera Classic are considering tuning that can change the dimensions of the car. Let's look at popular modifications and their effect on width:
- 🔧 Wheel arch extensions: increase the width by 20–50 mm on each side. This can lead to problems driving through automatic car washes or parking in garages.
- 🔧 Low profile tires: bus width (for example, transition from
185/65 R15on195/50 R16) increases the overall width of the vehicle by 10–15 mm. - 🔧 Spoilers and body kits: side skirts or trunk spoilers usually do not affect the width, but the front aero can protrude by 10–20 mm.
- 🔧 Mirrors-"ears": sports mirrors (eg from Nissan Silvia) wider than standard ones by 30–40 mm, which is critical for narrow parking lots.
Example: if you install arch extensions (+40 mm per side) and wide wheels, the overall width of the car can reach 1,775 mm (without mirrors). It will do Almera Classic wider than Renault Logan, and will require a review of parking habits.
Before tuning, check that the new vehicle width does not exceed 1,800 mm - this is the threshold value for many car washes and parking meters.
Frequent problems associated with the width of Almera Classic
Despite its compact size, owners Almera Classic face a number of problems related to dimensions. Here are the most common:
- 🚗 Scratches on mirrors: Due to the large overhang, mirrors often suffer when parking next to high curbs or in cramped garages.
- 🚪 Difficulty opening doors: in narrow courtyards, the rear passenger may not be able to open the door completely (opening angle ~65°).
- 🛠️ Difficulties during repair: Some body parts (for example, the front fender) have a non-standard shape, which makes adjustment difficult after an accident.
- 📦 Transportation of oversized cargo: Despite the wide trunk, the trunk opening is narrow (width ~1,000 mm), which limits possibilities.
Solutions:
- To protect mirrors, use covers or stickers to the extreme points.
- When parking in a tight space, open the driver's door first, then the rear door (this will allow the passenger to get out without scraping neighboring cars).
- To transport long items (such as skis), use roof rack — its width coincides with the width of the body (1,695 mm).
FAQ: answers to frequently asked questions about the width of the Nissan Almera Classic
Is it possible to drive into a 2 meter wide garage with an Almera Classic?
Theoretically, yes, but only if you fold the mirrors. The width of the body without mirrors is 1,695 mm, but taking into account the open doors, a minimum of 2.1 meters will be required. Also keep in mind that when opening the doors, the driver and passenger need additional space (about 50 cm on each side).
How does the width of the Almera Classic compare to the Nissan Note?
Nissan Note (hatchback) is 60 mm wider (1,755 mm without mirrors), but 300 mm shorter. This makes it more stable on the road, but less comfortable for rear passengers due to its smaller wheelbase.
Does the width of the wheels affect the overall width of the car?
Yes, but only slightly. For example, switching from standard wheels 185/65 R15 on 195/55 R16 increases the width of the car by ~10 mm on each side (total +20 mm). However, this is not critical for parking, but may affect passage through narrow gates.
What is the minimum width of a parking space suitable for Almera Classic?
The optimal width is 2.3 meters. You can park in a 2-meter-wide “pocket,” but there is a risk of hitting neighboring cars when the doors are opened. In Europe, a standard parking space is 2.5 meters wide.
Is it possible to install mirrors from another Nissan model on Almera Classic?
Technically yes, but it will require some work. For example, mirrors from Nissan Tiida 20 mm wider, which can lead to parking problems. There may also be discrepancies in fastenings and electrics (if the mirrors are heated or repeaters).