Cigarette lighter in Nissan Almera Classic - one of the most popular elements of electrical equipment, especially if you actively use car gadgets: recorders, navigators or chargers. When it suddenly stops working, the first thought is that the fuse has blown. But where exactly to look for it in this model?

Unlike many modern cars, where the fuse box is hidden under the hood or in the cabin behind complex panels, Almera Classic (especially in bodies B10 And N16) it is relatively easy to access. However, there are nuances: the location of the fuse depends on the year of manufacture and configuration. In this article we will analyze precise block diagrams, we’ll tell you how to check and replace the fuse, and also list typical reasons why the cigarette lighter may not work even after replacement.

If you've never opened a fuse box or are afraid of breaking something, don't worry. We will give step-by-step photo instructions and video examples so that the process takes no more than 10 minutes. And for those who like to understand thoroughly, we will add electrical circuit diagrams and tips for diagnosing the circuit.

Models and years of manufacture: where to look for the fuse?

Nissan Almera Classic was produced in several modifications, and the location of the cigarette lighter fuse is different in them. Here are the key options:

  • 🔧 Almera Classic B10 (1995–2000) - the fuse is in salon block under the instrument panel (to the left of the steering wheel). This is usually a fuse F18 on 15A, but in some versions - F20.
  • 🚗 Almera Classic N16 (2000–2006) - fuse moved to block under the hood (near the battery). Designation - F30 or F32, denomination 20A.
  • 🔄 Restyled versions (2003–2006) — sometimes the fuse is duplicated in both blocks (interior and engine compartment). In this case, you need to check both.

Important: in some trim levels (for example, with climate control), the cigarette lighter may be connected to the same circuit as 12V socket in trunk. If both do not work for you, look for a fuse marked CIGAR or POWER OUTLET.

📊 What Nissan Almera Classic do you have?
  • B10 (1995–2000)
  • N16 (2000–2006)
  • Restyling (2003–2006)
  • I don't know the model

Fuse box diagrams: where exactly is the right one located?

To avoid trying all the fuses at random, use the diagram. Below are the current wiring for Almera Classic B10 And N16.

1. Salon block (B10)

Located under the instrument panel on the driver's side. To access:

  1. Open the driver's door.
  2. Unscrew the two screws securing the plastic cover under the steering wheel (you need a Phillips screwdriver).
  3. Remove the cover - under it you will see the fuse box.
Designation Denomination (A) Purpose Notes
F18 15 Cigarette lighter In some versions - F20
F19 10 Interior lamps —
F21 15 Audio system May be related to the cigarette lighter in rare cases

2. Engine compartment (N16)

It is located next to the battery, in a plastic box with a black lid. To open:

  • Press the latches on the sides of the cover.
  • Lift the lid up - underneath there are diagrams with symbols.
Designation Denomination (A) Purpose Notes
F30 20 Cigarette lighter/socket 12V Can be duplicated with F32
F32 20 Additional outlet (if available) Not available in some configurations
What to do if there is no diagram on the block cover?

If the diagrams are erased or missing, take a photo of the fuse box and compare it with a photo on the Internet using the query “Nissan Almera Classic [your year] fuse box diagram”. Typically, diagrams are available on owner forums, for example, on Drive2 or Almera-Club.ru.

Step-by-step instructions: how to check and replace the fuse

If you have found the right fuse, all you have to do is check it and replace it if necessary. Here step-by-step algorithm:

☑️ Preparing to replace the fuse

Done: 0 / 4

1. Removing the fuse

Fuses in Almera Classic usually knife type (flat blade). To take them out:

  • 🔧 Take plastic tweezers (usually included with the car in the fuse box).
  • 🖇️ If you don’t have tweezers, use small pliers or even your nails (carefully!).
  • 🔍 Examine the fuse to the light: if the thread inside is burned out, it is faulty.

2. Checking the circuit with a multimeter (optional)

If the fuse is intact but the cigarette lighter does not work, check circuit voltage:

  1. Turn on the ignition.
  2. Connect black multimeter probe to ground (any metal part of the body).
  3. Red dipstick insert into the cigarette lighter socket (central contact).
  4. The voltage should be 12–14 V. If 0 V - there is a problem in the wiring or relay.
💡

If you don't have a multimeter at hand, you can use a 12V light bulb with wires. Connect it to the cigarette lighter contacts: if it lights up, the fuse and circuit are good.

3. Installing a new fuse

Important: never install a fuse of a higher rating! This may cause a fire. If the new fuse blows immediately, look for short circuit in the wiring.

⚠️ Attention: If, after replacing the fuse, the cigarette lighter sparks or gets hot, immediately unplug it and check the socket for foreign objects (coins, paper clips).

Typical faults: why does the cigarette lighter not work even after replacing the fuse?

Replacing the fuse does not always solve the problem. Here common causes, for which the cigarette lighter may remain inoperative:

  • 🔌 Oxidation of contacts — over time, the cigarette lighter socket becomes coated, which impairs contact. Solution: Clean with alcohol or WD-40.
  • 🔧 Broken wiring — most often the wires fray under the panel or near the battery. Check for breaks.
  • 🔄 Faulty relay - in some versions Almera Classic cigarette lighter controlled by relay K30 (in the engine compartment).
  • 🔥 Short circuit - if the fuse blows immediately after replacement, look for a short circuit in the wiring or in the socket itself.

Pay special attention cigarette lighter socket. Often small metal objects (paper clips, coins) get into it, which close the contacts. Disassemble the nest and check for debris.

💡

If the cigarette lighter works “every time”, the problem is most likely in the oxidized contacts of the socket, and not in the fuse.

How to disassemble the cigarette lighter socket for cleaning or replacement?

If the fuse is working, but the cigarette lighter does not heat or sparks, you will have to disassemble the socket. B Nissan Almera Classic it's done like this:

  1. Disconnect the negative terminal of the battery (required!).
  2. Remove the plastic trim around the gearshift lever (snap the clips with a screwdriver).
  3. Unscrew the two screws securing the cigarette lighter socket (they may be hidden under the decorative panel).
  4. Disconnect the wiring connector from the socket and remove it.

Now examine the nest:

  • 🔍 Check it out central contact - it should spring back when pressed.
  • 🔧 Clean contacts from oxidation (use sandpaper or alcohol).
  • 🔄 If the nest is melted, replace it completely (it’s inexpensive, ~300–500 rubles).
⚠️ Attention: When assembling, make sure that the wires are not twisted or touch metal parts of the body. This may cause a short circuit.

Where to buy a fuse and cigarette lighter socket for Almera Classic?

Fuses and spare parts for the cigarette lighter are sold in any car store, but there are nuances:

Detail Article (example) Price (RUB) Where to buy
Fuse 15A BOSCH 1 987 312 115 50–100 Any auto store, Ozon, Wildberries
Fuse 20A HELLA 8EA 008 637-121 60–120 Autoanalysis, Exist.ru
Cigarette lighter socket Nissan 28550-4M000 400–800 Official dealer, Autodoc

Advice: if you don’t want to waste time searching, take fuse with reserve - 10A, 15A and 20A. They are universal and are suitable not only for the cigarette lighter, but also for other circuits in the car.

For the cigarette lighter socket it is better to take original part (article 28550-4M000), but if the budget is limited, analogues from Hella or Bosch. The main thing is to check the compatibility of the connector.

FAQ: Frequently asked questions about the cigarette lighter fuse in Nissan Almera Classic

Is it possible to install a fuse of a higher rating (for example, 25A instead of 20A)?

No, it's dangerous! The fuse is designed for a certain load. If you install a more powerful one, if there is a short circuit, the wires may melt or even catch fire. Always use the fuse of the rating shown in the diagram.

The cigarette lighter works, but gets hot. What's the problem?

Most likely, poor contact in the socket or overload of the circuit. Check:

  • Are there too powerful devices connected to the cigarette lighter (for example, a tire compressor).
  • Is there any oxidation on the socket contacts (clean them).
  • Is the central spring in the socket loose (if so, replace the socket).
Where is the cigarette lighter relay located?

In most versions Almera Classic The cigarette lighter does not have a separate relay. However, in some configurations (for example, with an additional 12V socket) a relay may be used K30 in the engine compartment. Check the diagram on the block cover.

How to check if there is voltage to the cigarette lighter without a multimeter?

You can use a simple 12V light bulb with wires:

  1. Connect one wire of the light bulb to ground (car body).
  2. Insert the second wire into the cigarette lighter socket (central contact).
  3. If the light comes on, there is voltage, the problem is in the socket or fuse.

You can also try connecting a known working device (for example, a phone charger) - if it doesn’t work, the problem is in the circuit.

What should I do if after replacing the fuse it blows again?

This is a sign short circuit. Proceed like this:

  1. Disconnect the wires from the cigarette lighter socket.
  2. Insert a new fuse.
  3. If it does not burn out, the problem is in the socket or connected devices.
  4. If it burns out, look for a short circuit in the wiring (check with a multimeter in continuity mode).

Most often, a short circuit occurs due to damaged wire insulation under the panel or at the point of passage through the body.