Nissan Almera Classic is a legendary sedan that has gained popularity due to its reliability, simplicity and affordable price. Despite the fact that the model has long been discontinued, it still remains in demand on the secondary market, especially in the CIS countries. One of the key factors when choosing a used car is the condition of the interior: its ergonomics, quality of materials and level of comfort.

In this article we will look at the interior in detail Nissan Almera Classic (including photos of the interior of different years and trim levels), we will highlight the strengths and weaknesses of the finish, and also give practical recommendations for care and modernization. We will pay special attention to the typical problems that owners face and how to solve them.

Photos of the Nissan Almera Classic interior: general overview of the interior

Interior Almera Classic (also known as Nissan Sunny B15 in some markets) has a classic early 2000s style. The interior design is laconic, without frills, but at the same time functional. The main materials are fabric (in basic versions) or velor (in top versions), medium-quality plastic and metal inserts on the steering wheel.

Below are real photos of the interior of different modifications:

  • 📷 Basic equipment (2006–2012): gray plastic, fabric seat upholstery, manual transmission. Steering wheel without steering wheel paddles, simple instrument panel with analogue arrows.
  • 📷 Medium equipment (Comfort): velor upholstery, power accessories (windows, mirrors), air conditioning. A radio with CD support appears on the center console.
  • 📷 Top version (Luxury): leather steering wheel, heated front seats, climate control (rare), on-board computer. In some examples there is a wooden panel finish.

Salon feature Almera Classic — high driving position, which not everyone likes. However, this is compensated by good visibility and convenient location of controls. The instrument panel is informative, but the illumination of the scales at night leaves much to be desired.

📊 What upholstery material do you prefer?
  • Fabric
  • Velor
  • Leather
  • Doesn't matter

Finishing materials: pros and cons

Quality of materials in Nissan Almera Classic corresponds to the budget class. The plastic is hard, but not creaky (under normal use). The fabric upholstery of the seats is wear-resistant, but over time, abrasions may appear on the side bolsters. Velor is more pleasant to the touch, but more difficult to care for - dust and dirt get stuck in the pile.

Let's take a closer look at the main materials:

Material Benefits Disadvantages Service life (with care)
Fabric (basic) Durable, fade resistant, easy to clean Over time, it loses color and a “gloss” may appear. 7–10 years
Velor (Comfort) Softness, better sound insulation, pleasant to the touch Collects dust, difficult to clean from stains 5–8 years
Leather (Luxury, rare) Premium look, easy to clean, durable May crack if not properly cared for, expensive to repair 10+ years
Plastic panel Does not fade, scratch resistant Hard, may squeak in cold weather 15+ years

Important: in cars produced from 2006–2008, the plastic of the center console often turns yellow due to poor-quality coating. This is a material defect and not a consequence of use. The problem is solved by polishing or replacing the panel.

⚠️ Attention! Upon purchase Almera Classic With mileage, be sure to check the condition of the plastic under the steering wheel and on the door cards. If it is “porous” or crumbling, this is a sign of prolonged exposure to moisture (for example, after a flood or leaking seals).

Ergonomics and comfort: what you need to know before buying

Salon Nissan Almera Classic designed for five passengers, but only four will feel comfortable. The rear seats are a bit narrow for three adults, and legroom is limited due to the high floor tunnel. However, for its class (B+) the car offers quite acceptable capacity.

Key points of ergonomics:

  • 👍 Convenient steering wheel position: Adjustable only for angle, but the range is sufficient for most drivers.
  • 👎 High rise: may seem uncomfortable for drivers taller than 185 cm - the ceiling “presses”.
  • 👍 Good visibility: Thin pillars and large windshield provide excellent visibility.
  • 👎 Uncomfortable armrests: in the basic versions they are absent, in the top versions they are too hard.

Particular attention should be paid seat adjustments. The driver's seat has only longitudinal adjustment and a change in the angle of the backrest. There is no lumbar support even in top trim levels, which can cause discomfort on long trips.

💡

If you are tall, be sure to test your driving position before purchasing. Some drivers have trouble placing their foot on the clutch pedal due to the high seat.

Typical interior problems and ways to solve them

Like any used car, Almera Classic has a number of interior “diseases”. Most of them are associated with wear and tear of materials or poor workmanship. Let's look at the most common ones:

  1. Plastic creaks - appear over time due to drying of the lubricant in the panel fastenings. Solution: Disassemble the console and apply silicone grease to the joints.
  2. Seat sagging — springs lose elasticity after 150–200 thousand km. Solution: replacing foam rubber or installing new seats from Nissan Note (suitable for fastenings).
  3. Electronics malfunctions — instrument lighting bulbs often burn out or buttons on the center console fail. Solution: replacing the contacts or the entire panel (article no. 28501-BM400 for tidying).
  4. Smell in the cabin - appears due to clogged air conditioner drainage or mold in the air ducts. Solution: cleaning the system Liqui Moly Klima-Anlagen-Reiniger.

One of the most annoying problems is floor corrosion under rugs. Water enters the cabin through leaky door seals or the fuel tank hatch. To check this, lift up the floor mats and inspect the metal underneath. If there is rust, welding repairs will be required.

How to check the salon for hidden problems?

1. Smell the rugs - the smell of dampness indicates leaks. 2. Check the operation of all buttons and controls (especially heated seats). 3. Inspect the ceiling for sagging - this is a sign of peeling upholstery.

Comparison of Almera Classic interior with competitors

In my class Nissan Almera Classic competed with such models as Toyota Corolla E12, Honda Civic 7 And Hyundai Accent. Let's compare their salons according to key parameters:

Parameter Nissan Almera Classic Toyota Corolla E12 Honda Civic 7
Plastic quality Average, may creak High, soft touch Solid, but without squeaks
Rear legroom 250 mm 270 mm 240 mm
Noise level High (poor sound insulation) Low Medium
Steering wheel ergonomics Angle adjustment only Reach and angle adjustment Angle adjustment

Almera Classic loses Corolla in terms of sound insulation and quality of materials, but wins in price and ease of repair. Compared to Civic, the Nissan has a more spacious interior but a less sporty riding position.

💡

If silence in the cabin is important to you, pay attention to additional sound insulation.Even for Almera Classic offers kits for 15–20 thousand rubles, which reduce noise levels by 30–40%.

Interior tuning: how to improve the interior without high costs

Update the salon Nissan Almera Classic possible even on a limited budget. Here are some proven methods:

  • 🔧 Replacing the steering wheel: the original steering wheel can be replaced with a leather one from Nissan Tiida (article 32600-4M000) or install the sports version from NRG.
  • 🎨 Seat reupholstery: velor or leatherette will cost 20–30 thousand rubles for a complete set. Popular colors are black, gray and burgundy.
  • 💡 LED backlight: Flex strips under the dash and at the passenger footwells (6000K color) add a modern touch. Important: do not overload the on-board network!
  • 📻 Multimedia system: instead of the standard radio, you can install Pioneer AVH-X2800BT with support Apple CarPlay And Android Auto.

For those who want drastic changes, there is the option of completely redoing the dashboard. For example, the panel from Nissan Note (2006–2012) matches the mountings and looks more modern. However, this is a labor-intensive process that requires re-soldering the wiring.

Select materials (leather, Alcantara, carbon fiber)|Check the compatibility of parts with your modification|Remove the old upholstery carefully so as not to damage the fasteners|Check the operation of the electrics after installing new elements-->

How to choose an Almera Classic with a good interior: tips for the buyer

Upon purchase Nissan Almera Classic in the secondary market, interior is one of the key criteria. Here's what you should pay attention to:

  1. Smell: If the interior smells damp or musty, there is a high chance of leaks or flooding. Check the rugs and the space underneath them.
  2. Condition of the seats: Sagging, torn seams or stains indicate rough use. Velor should be evenly colored, without bald spots.
  3. Electronics operation: Check all buttons, power windows, heated seats (if equipped). A common problem is a non-working on-board computer.
  4. Backlashes and creaks: shake the steering wheel, instrument panel, gear lever. Plays of more than 5 mm are a sign of wear of the fasteners.

The best option is a car with a mileage of up to 150 thousand km and a service history. If the interior is in perfect condition, but the mileage is over 200 thousand, this is a reason to doubt the seller’s honesty (the odometer may be twisted).

⚠️ Attention! B Almera Classic 2006–2008 a common problem with electrical wiring under the driver's seat. The wires rub against the metal, which leads to a short circuit. Before purchasing, be sure to check the integrity of the harnesses!

FAQ: Frequently asked questions about the Nissan Almera Classic interior

Is it possible to install heated seats if they didn't come with them from the factory?

Yes, it's possible. You will need to buy a set of heating elements (for example, Webasto Thermo Top) and control unit. The average cost of service work is 8–12 thousand rubles. Important: heating should not exceed a power of 100 W per seat, otherwise the on-board computer will be overloaded.

What size covers are suitable for Almera Classic seats?

The size of covers suitable for the front seats is Station wagon 5 (according to the classification of most manufacturers). For the back sofa - Station wagon 7. Popular brands: Covercraft, WeatherTech, Autostyle.

What to do if the instrument panel squeaks?

Squeaking usually occurs due to plastic parts rubbing against each other. Solution:

  1. Remove the panel (unscrew the 4 screws under the decorative trim).
  2. Apply silicone grease to the joints.
  3. Place felt pads at the fastening points.

If the squeak does not disappear, check the fastening of the dashboard to the body (the bolt under the steering column may become loose).

Which radio is suitable to replace the standard one?

For Almera Classic 1-DIN or 2-DIN devices are suitable. Popular models:

  • Pioneer DEH-S4200BT (1-DIN, Bluetooth, USB)
  • Sony XAV-AX1000 (2-DIN, support Apple CarPlay)
  • JVC KD-X351BT (1-DIN, budget option)

To install 2-DIN, you will need to modify the center console (cut out plastic).

How to remove yellowness from the plastic panel?

Yellowness appears due to oxidation of the top layer of plastic. Solutions:

  1. Polishing: use paste 3M 09374 with a polishing machine.
  2. Coloring: special paint for plastic Plasti Dip (lasts 2–3 years).
  3. Panel replacement: the original part costs ~15 thousand rubles (article 62004-BM400).
Do not use bleach! They destroy the structure of the plastic.