Fuse box in the Nissan Almera interior: location, diagram and replacement

Nissan Almera is a popular sedan known for its reliability and ease of maintenance. However, even in such a car, electrical problems periodically arise: the headlights, power windows, or cigarette lighter stop working. In 90% of cases the burnt person is to blame fuse in the salon block. But where is it? How to check and replace it without contacting service?

In this article you will find detailed fuse box diagram for all generations Almera (including G15, B17 And N18), a decoding of each element, as well as step-by-step diagnostic instructions. We will look at common mistakes when replacing, tell you what tools you will need, and give tips on how to avoid short circuits when working with electrical equipment.

Where is the fuse box located in the Nissan Almera interior?

B Nissan Almera The interior fuse box is located to the left of the steering column, behind a plastic cover. The exact location depends on the vehicle generation:

• 🔹 Almera G15 (2012–2018) — the unit is hidden behind a cover on the instrument panel, next to the steering wheel. To open, pull the tab at the bottom.
• 🔹 Almera B17/N18 (2019–present) — the block is shifted slightly lower, closer to the pedal assembly. The cover is secured with a latch.
• 🔹 Almera Classic (N16) — the unit is located under the glove compartment, but it is accessible from the driver’s side.

On some versions (for example, Almera Tino) the fuse box can be divided into two parts: main and additional. The second is usually located under the hood, but always remains in the cabin main module with the most popular fuses.

⚠️ Attention: On right-hand drive models (for example, Japanese versions), the fuse box is mirrored and located to the right of the steering column. Do not confuse this with the relay box, which is often located nearby!

To get to the fuses, you don't need tools - the cover can be opened by hand. However, it is useful for checking and replacing flat screwdriver (to remove fuses) and tester (multimeter) for diagnostics.

Nissan Almera fuse box diagram: decoding by numbers

Each fuse in the block is responsible for a specific circuit. Below is universal scheme for most versions Almera (exact values may vary slightly depending on the year of manufacture and configuration).

Fuse no.	Denomination (A)	Purpose	Symptoms of a problem
F1	10A	Body Control Module (BCM), Immobilizer	The central locking does not work, the car does not start (the immobilizer does not recognize the key)
F5	15A	Cigarette lighter, 12V socket	Cigarette lighter does not work, devices do not charge
F10	20A	Power windows (all 4 doors)	Power windows do not work (or only one)
F15	10A	Low beam (left headlight)	Low beam on one side does not work
F20	15A	Audio system, navigation	The radio does not turn on, the settings are reset

Important: On Almera G15 with engine HR16DE fuse F25 (10A) responsible for the operation of the oxygen sensor. If it burns out, the dashboard lights up Check Engine.

The complete diagram for your model can be found:

• 📄 B instruction manual (section "Electrical equipment").
• 🔧 On the back of the fuse box cover (there is often a diagram there).
• 🌍 On official resources Nissan or owner forums (for example, drive2.ru).

How to check a fuse without a tester?

If you don't have a multimeter at hand, you can visually inspect the fuse for broken wires inside. You can also use the “replacement method” - temporarily install a known working fuse with the same rating from another circuit (for example, from the cigarette lighter).

How to check a fuse in a Nissan Almera: step-by-step instructions

If you suspect a fuse has blown, follow this procedure:

1. Turn off the ignition and disconnect the negative terminal of the battery (this is mandatory for safety!).
2. Open the fuse box cover and find the required element according to the diagram.
3. Remove the fuse using plastic tweezers (usually included with the block) or a flat-head screwdriver.
4. Check the fuse using one of the following methods:
   • 🔍 Visually - if the wire inside is burned out, the fuse must be replaced.
   • 📊 Using a multimeter - set the circuit test mode and touch the contacts with the probes. If the resistance is infinite, the fuse has blown.

If the fuse is good, check relay (it may click, but not work) or the circuit itself for a short circuit.

⚠️ Attention: Never replace a fuse with a component with large denomination (eg 10A instead of 15A)! This may cause the wiring to catch fire. If the new fuse blows immediately, look for short circuit in the chain.

Typical problems with fuses in Nissan Almera and their solutions

Owners Almera Often faced with several typical faults related to fuses:

• 🔥 The cigarette lighter fuse (F5) burns out when connecting devices.
  Reason: Short circuit in the socket or connection of powerful consumers (for example, a compressor). Solution: Check the socket contacts and clean them from oxidation. Use a fused power strip.
• 🚗 The power window fuse (F10) burns out when the glass moves.
  Reason: The window mechanism is worn out or moisture gets into the door. Solution: Lubricate the glass guides, check the integrity of the wiring in the door corrugation.
• 💡 The low beam fuse (F15/F16) burns out when the headlights are turned on.
  Reason: Breakdown in the lamp or oxidation of contacts in the headlight. Solution: Replace the lamp, clean the contacts. Check the voltage at the headlight connector (should be ~12V).

If the fuse burns again after replacement, don't ignore the problem This is a sign of a serious problem. For example, a short circuit in a wiring harness can cause a fire. In such cases, it is better to contact an auto electrician for diagnosis.

How to replace a fuse in a Nissan Almera: videos and tips

The fuse replacement process takes no more than 5 minutes, but there are several nuances:

1. Use only original fuses or high-quality analogues (for example, Bosch, Hella). Cheap Chinese fuses may not trip if overloaded.
2. If the fuse is stuck to the contacts, do not break it out by force. Spray contacts WD-40 and gently rock from side to side.
3. After replacement, check the operation of the circuit. For example, if you changed the cigarette lighter fuse, connect the charger and make sure it works.

For clarity, we recommend watching video instructions (for example, at YouTube on request"Nissan Almera fuse replacement"). Please pay attention to models of the same generation - the block diagram may differ.

An example of a correct replacement:

1. Отключить аккумулятор.
2. Открыть крышку блока (надавить на защелку).
3. Найти предохранитель F5 (15A) для прикуривателя.
4. Извлечь его пинцетом.
5. Установить новый предохранитель (15A!).
6. Подключить аккумулятор и проверить работу.

Frequently asked questions about fuses in Nissan Almera

In this section we have collected answers to the most popular questions from owners Almera.

Is it possible to drive without a fuse if it's blown?

No! The fuse protects the circuit from overload. If it is removed, the risk of short circuit and fire increases significantly. As a last resort, you can temporarily install a fuse with same denomination from another circuit (for example, from a reserve slot), but only for a trip to the service.

Why do fuses light up on Almera after washing?

Most likely, water got into the fuse box or electronics connectors (for example, in the door). Dry the unit with a hairdryer (cold air!) and check the circuits for short circuits. The fuses for power windows and audio systems are especially vulnerable.

Which fuse is responsible for the alarm on Almera?

A fuse is usually responsible for the standard alarm F3 (10A) in the salon block. If you have an aftermarket alarm, look for a separate fuse box under the hood or behind the dashboard.

Is it possible to repair a blown fuse (for example, re-solder it)?

Technically yes, but this is extremely dangerous. Homemade wire “bugs” are not designed to carry current and can melt, causing a fire. The fuse costs pennies - don't risk it!

Conclusion: How to Avoid Fuse Problems

To keep the fuses in your Nissan Almera served for a long time, follow simple rules:

• 🔌 Do not connect devices with more power to the cigarette lighter. 120 W (for example, car vacuum cleaners). Use a power strip with protection.
• 🚿 After washing, check whether water has entered the interior unit. Dry it if necessary.
• 🔧 Regularly inspect the wiring for chafing (especially in the doors and under the hood).
• 🔋 Before winter, check the condition of your battery - a weak battery can cause voltage surges that kill fuses.

If you encounter repeated burnout the same fuse, do not delay diagnosis. B Almera common problems with:

• 🔥 Wiring in the corrugated doors (window lifters).
• 💡 Contacts in the headlights (light fuses).
• 🎵 Audio system connectors (radio fuse).

Remember: The fuse is the "weak link", which protects your car from serious damage. Do not ignore its combustion - this is a signal of a malfunction!