National Bank "Goliath": a complete guide to selection, configuration and repair

Bank National Goliath is not just a financial institution, but a unique product that combines advanced technologies for storing valuables and innovative security systems. The first mentions of this type of bank appeared in the early 2000s, when manufacturers began to integrate biometric scanners and multi-layered security systems into traditional safe designs. Today Goliath is considered one of the most reliable solutions for storing cash, documents and jewelry both at home and in commercial structures.

Unlike classic safe deposit boxes or electronic safes, Goliath offers the user a hybrid access system: a combination of a high-end mechanical lock and digital control with support for mobile applications. This makes it resistant to hacking, cyber attacks and even physical damage. However, high functionality requires proper configuration and regular maintenance - these are the issues our article is devoted to.

We will analyze the technical characteristics, compare models, and give step-by-step instructions for installation and troubleshooting of typical faults. And for those who are just choosing a bank, we have prepared an exclusive checklist of criteria that even experienced buyers often miss.

Technical characteristics of the bank Goliath: what you need to know before buying

Main advantage Goliath National Bank - This is its modular design, which allows you to adapt the device to specific needs. Basic models are equipped with:

• 🔐 Castle class CEN Grade 6 (maximum level of burglary protection according to European standards).
• 📱 Bluetooth module for remote control via smartphone (compatible with iOS/Android 10+).
• 🔋 72-hour backup battery - remains operational during a power outage.
• 🚨 Motion and vibration sensors with email/SMS notifications.

Dimensions range from compact desktop versions (30×20×20 cm) to floor safes up to height 180 cm. Weight depends on the model: e.g. Goliath-700 weighs 120 kg, and Goliath-3000 - already 350 kg (which makes it harder to steal). An important nuance: all models are certified according to the standard EN 1143-1, which guarantees fire resistance (up to 2 hours at temperatures 1000°C).

Model	Volume (l)	Wall thickness (mm)	Price (from/to, rub.)	Features
Goliath-500	12	8	45 000 – 60 000	Ideal for documents, jewelry
Goliath-1200	35	12	90 000 – 120 000	Additional compartment for weapons (certified by Rostest)
Goliath-3000	110	20	250 000 – 350 000	Built-in air ionizer, protection against electromagnetic pulses

Please note: models with the prefix «S» (For example, Goliath-1200S) are equipped retinal scanner, which increases the cost by 20–30%, but makes the device virtually invulnerable to copying keys or guessing codes.

⚠️ Attention: When purchasing, check availability FSB certificate of conformity - without it, the bank cannot be used to store weapons or secret documents.

Comparison with analogues: why Goliath better (or worse) than competitors

There are dozens of safes and bank vaults on the market, but not all can compete with Goliath in terms of price and functionality. For objectivity, let’s compare it with three popular analogues:

• 🔹 Rosbank Safe Pro: 15–20% cheaper, but lacks biometric authentication and has thin walls (6 mm against 12–20 mm at Goliath).
• 🔹 Cisa Alpha: Italian quality, but does not support mobile app and requires annual maintenance (Goliath has an interval of 3 years).
• 🔹 Kaba Mas X-10: superior in burglary resistance, but costs 2 times more and weighs 40% more, which complicates installation.

Main advantage Goliath - this is flexibility of settings. For example, only this line has the function "Guest access", which allows you to issue temporary codes for third parties (for example, for a cleaner or an auditor) without the risk of leaking the main password. In this case, all actions are logged, and the owner receives a notification about each opening.

There are also weaknesses:

• ❌ High price for models with biometrics (from 150,000 rub.).
• ❌ Difficulty of self-installation - for models weighing >100 kg professional installation required.
• ❌ Limited compatibility with smart homes (only works with Yandex Alice And Google Home, but does not support Apple HomeKit).

Step-by-step instructions for installation and initial setup

Installation Goliath requires caution, especially when it comes to floor-standing models. Below is a universal algorithm suitable for most versions (exception: Goliath-3000, which requires anchor fasteners).

1. Choosing a location

Ideal location:

• 📍 Away from windows and doors (to avoid direct access of villains).
• 📍 On a concrete base (wooden floors will not support the weight of models from 150 kg).
• 📍 In a humid room <50% (condensation may damage electronic components).

2. Installation

For wall models (Goliath-500/700):

1. Mark the holes for the fasteners (use the template included in the kit).
2. Drill deep into the wall 8–10 cm (for concrete - drill 10 mm).
3. Secure the bank to 4 anchor bolts (included).

For floor models:

1. Установите банк на выбранное место.
2. Отметьте точки крепления через монтажные отверстия.
3. Просверлите пол насквозь (диаметр сверла — 12 мм).
4. Закрепите болтами М10 с шайбами (момент затяжки — 25 Н·м).

3. Electronics setup

After installation:

1. Connect your bank to the network 220V (use only voltage stabilizer!).
2. Activate battery backup: press Menu → Power → Backup ON.
3. Set a master password (minimum length is 8 characters, with numbers and letters).
4. Connect the mobile application Goliath Safe via Bluetooth (instructions in section 4).

⚠️ Attention: If an error code appears on the display when you turn it on for the first time E-03, this means the vibration sensor is faulty. Contact a service center immediately - repairing it yourself will void the warranty.

Connecting to a mobile application and setting up notifications

Application Goliath Safe (available in App Store And Google Play) allows you to manage your bank remotely, receive notifications about hacking attempts, and even block access in case of theft. To connect it:

1. Download and install the application on your smartphone.
2. Turn on Bluetooth on your phone and bank (button Bluetooth ON on the rear panel).
3. In the application, select “Add device” → “Goliath” → enter serial number (located on a sticker inside the door).
4. Confirm pairing on the bank display (the confirmation code will appear in the application).

After connecting, it is recommended to configure notifications:

• 🔔 Hacking attempt: SMS + push notification (reacts to 3 incorrect code entries in a row).
• 🔔 Opening the door: push only (to avoid spam).
• 🔔 Low battery: email + SMS (critical threshold - 20%).

Important nuance: if you use Goliath to store weapons, activate the mode in the application settings "Police Protocol". In this case, if there is a break-in, the bank will automatically send a signal to the nearest security post (the function only works in Russia).

Typical faults and solutions

Even the most reliable devices sometimes break down. Below is a list of the most common problems and step by step solutionswhich you can do yourself.

1. The bank does not open (the code is not accepted)

Reasons and actions:

• 🔋 The battery is low: connect the bank to the network for 1 hour, then enter the code again.
• 🔑 Mechanical lock jams: lubricate the bolt WD-40 (do not use silicone based oils!).
• 📱 Synchronization with the application failed: Reboot the bank (button Reset on the rear panel) and pair again.

2. Error E-01 (sensor malfunction)

This error indicates a problem with infrared sensor, which is responsible for detecting movement inside the bank. To resolve:

1. Disconnect your bank from the network.
2. Remove the inner panel (screwdriver PH2).
3. Wipe the sensor with a cotton swab dipped in alcohol.
4. Check the connection of the cable (must be tightly inserted into the connector J3).

3. Bluetooth doesn't work

If the bank is not detected in the application:

• 📵 Make sure the distance between the phone and the bank <10 meters.
• 🔄 Reboot the Bluetooth module: Menu → Settings → Bluetooth → Restart.
• 📱 Update the application to the latest version (in App Store/Google Play).

Error code	Reason	Solution
E-02	Electronic unit overheating	Turn off for 30 minutes, check ventilation
E-05	Fingerprint mismatch	Overwrite biometric data
E-08	Server synchronization error	Check your internet connection, reboot the bank

⚠️ Attention: If after rebooting the bank gives an error E-09, it means blocking on suspicion of hacking. To unlock, you will need a code from the service center (call the number on the warranty card).

What to do if the bank is blocked after 10 incorrect attempts?

In this case, the "Emergency blocking" mode is activated. To unlock:

1. Disconnect the bank from the network for 15 minutes.

2. Enter the factory code (indicated in the device passport, usually this is a combination of the production date).

3. Reset user settings via menu Factory Reset.

If this does not help, the intervention of a service engineer is required.

Maintenance and life extension

Average service life Goliath — 15–20 years, but only subject to regular maintenance. Here's what to do:

1. Cleaning and lubrication

• 🧹 External surface: Wipe with a soft cloth and soapy water (do not use abrasives!).
• 🛠️ Lock mechanism: lubricate graphite lubricant 1 time per year.
• 🔋 Battery contacts: Clean oxidation with alcohol every 6 months.

2. Electronics check

Once every 3 months:

• Test the backup power (unplug the power cable and check if the bank opens).
• Update firmware via menu Settings → System → Update.
• Check the application event log for suspicious access attempts.

3. Replacing consumables

Time frame for replacing key elements:

• 🔋 Battery: every 3–4 years (original art. GB-2000).
• 🔑 Keys: at the first signs of wear (seizing, tight turning).
• 📡Bluetooth Antenna: When you lose signal in the distance <5 meters.

Owner reviews: pros and cons from real experience

Analysis of reviews on sites (Yandex.Market, Wildberries, Ozon) shows that Goliath is estimated on average at 4.7/5. Here's what users note:

Pros

• ✅ Reliability: “Bought Goliath-1200 5 years ago - not a single breakdown, despite frequent power outages" (Ivan, Moscow).
• ✅ Convenient application: “I can open a bank from work if my wife has forgotten the code” (Elena, St. Petersburg).
• ✅ Child lock: “The child tried to find the code - the bank blocked and sent me an SMS” (Alexey, Yekaterinburg).

Cons

• ❌ Complex installation: “I had to hire craftsmen - I couldn’t handle the anchors myself” (Dmitry, Novosibirsk).
• ❌ Expensive repairs: “Replacing the biometric scanner cost 15,000 rubles.” (Olga, Kazan).
• ❌ Noisy alarm: “Triggered by the vibration of passing trucks” (Sergey, Krasnodar).

Interesting fact: among the owners Goliath-3000 80% use it to store not only money, but also cryptocurrency hardware wallets (type Ledger or Trezor), since the bank protects against electromagnetic pulses.

FAQ: Frequently asked questions about the bank Goliath

Is it possible to install Goliath in a rented apartment?

Yes, but only wall-mounted models weighing up to 50 kg (For example, Goliath-500). Floor-standing versions require permission from the property owner as they are secured with anchors. Also keep in mind that when moving, dismantling the bank may damage the wall/floor finish.

What to do if you lost the key to a mechanical lock?

Contact the service center with your passport and purchase and sale agreement. Replacing the key will cost 3,000–5,000 rub., but the lock will need to be recoded (a 2-3 hour lesson). Never order a duplicate from private craftsmen - this will void the warranty.

Does it support Goliath integration with smart home systems?

Partially. The bank is compatible with Yandex Alice (commands “open”, “close”, “report status”) and Google Home (read status only). For full integration it is required cloud bridge (sold separately for 8,000 rub.).

How often should I change my access code?

The manufacturer recommends updating the code every 6 months. If the bank is used in an office or public place - every 3 months. There is a reminder about this in the app (Settings → Security → Password Reminder).

Is it possible to store in Goliath weapons?

Yes, but only if the model is certified by the FSB (the name must have the prefix «W», for example, Goliath-1200W). For legal storage you need:

1. Agreement with a licensed security company.
2. Monthly inspection by an inspector of the Russian Guard.
3. Installation of an additional humidity sensor (to avoid barrel corrosion).