Owners Nissan Almera G15 Often faced with the problem of rapid wear of the factory carpet - especially in the pedal areas, under the feet of the driver and front passenger. Dust, moisture, mechanical stress and seasonal reagents turn the interior into a source of unpleasant odors and visual discomfort. There is a solution: **carpet overlays** not only protect the original covering, but also transform the interior, adding practicality and style.

In this article we will look at what types of pads are suitable for Almera G15 (2012–2018), how to choose them correctly in size and material, and also give step-by-step installation instructions - from preparing the interior to fixing the fasteners. We will pay special attention to **universal and original solutions**, compare their pros and cons, and also reveal the secrets of care that will extend the life of your veneers for years.

Why are carpet pads necessary for Nissan Almera G15?

Factory carpet in Almera G15 made of synthetic materials of medium quality. It absorbs noise well, but does not resist well:

  • 💧 Moisture - snow, rain and even condensation from shoes penetrate the fibers, creating a favorable environment for mold.
  • 👟 Mechanical wear — constant friction of the soles erases the pile, exposing the base.
  • 🧂 Chemical reagents — salt and deicing mixtures corrode the structure of the material.
  • 🐕 Wool and dirt — if pets drive in the car, it becomes almost impossible to clean the carpet.

Overlays solve these problems comprehensively. For example, **rubber or PVC products** are completely waterproof, while **textiles with a rubberized base** protect against dirt while maintaining breathable properties. In addition they:

  • 🔄 Makes cleaning easier — just take it out and wash it, instead of cleaning the entire interior.
  • 🎨 Modernize the interior — You can choose a color that contrasts with the seat upholstery.
  • 💰 Save money — replacing carpet at a service center costs 3–5 times more than buying pads.
⚠️ Attention: If you are exploiting Almera G15 In regions with humid climates or frequent rainfall, failure to protect the carpet will result in corrosion of the metal floor underneath. Restoring the body will cost tens of thousands of rubles.
📊 What linings do you use in your car?
  • Factory (no pads)
  • Rubber
  • Textile
  • PVC (polyvinyl chloride)
  • Others

Types of linings: comparison of materials and their features

The market offers four main types of overlays, each with its own advantages and limitations. The choice depends on the climate, driving style and budget.

Material Pros Cons Average price (set)
Rubber (EPDM) Waterproof, resistant to oils and reagents, long service life (5+ years). Rigid, may creak, limited design. 1 500–3 000 ₽
PVC (polyvinyl chloride) Flexibility, wide choice of textures (including “velor”), ease of cleaning. Less resistant to frost (cracks at -25°C), may fade in the sun. 2 000–4 000 ₽
Textiles (polyester, nylon) Softness, “premium” look, good sound insulation. Absorbs moisture, is more difficult to clean, wears out in 2–3 years. 2 500–5 000 ₽
Combined (textile + rubber) Combines the advantages of both materials: the top layer is fabric, the bottom layer is a waterproof base. High price, difficult to choose the size. 3 500–6 000 ₽

For Nissan Almera G15 the best choice would be **rubber or PVC pads** - they cope best with Russian roads and weather. Textile ones are suitable for those who value comfort and are willing to devote more time to care. Combination options are an ideal but expensive compromise.

Important: Cheap PVC linings (price below 1,500 ₽) often contain toxic plasticizers, which emit an unpleasant odor when heated. Check the quality certificates from the seller!

How to choose the right size pads for Almera G15?

Universal eye pads are the worst solution. They slip, wrinkle and do not cover critical areas. For Almera G15 (body N17) there are two options:

  1. Original (OEM) — are produced according to Nissan patterns and perfectly follow the contours of the floor. Article number for front pads: 999T0-3M000 (rubber), for rear - 999T0-3M001.
  2. Analogues from third-party brands - for example, WeatherTech, Lloyd Mats or 3D MAXpider. They are cheaper than the original, but require clarification of compatibility by VIN or year of manufacture.

In order not to be mistaken with the size:

- Remove old mats and clean the surface.

- Measure the length and width of the area under the driver/passenger's feet (including pedals).

- Record the distance from the gas pedal to the central tunnel (must be ≥ 45 cm).

- Check the height of the sides (optimally 2–3 cm).

- Compare the data obtained with the parameters of the linings in the catalog.-->

For Almera G15 standard sizes of front pads:

  • 📏 Length: 50–55 cm (from the pedals) and 60–65 cm (from the door).
  • 📏 Width: 40–45 cm (at the central tunnel) and 50–55 cm (at the threshold).
  • 📏 Side height: 2–4 cm (the higher, the better the protection, but may interfere with the legs).
⚠️ Attention: If your car has winter pedals (with cleats), choose pads with reinforced edges - regular rubber will wear out quickly.

Top 5 rubber brands for Nissan Almera G15

Not all manufacturers take into account the features Almera G15. We tested popular brands and selected the best options in terms of price/quality ratio:

  1. WeatherTech (USA) - premium thermoplastic elastomer overlays. They accurately follow the contours of the floor, do not slip, and are resistant to temperatures from -50°C to +120°C. The downside is the price (from RUB 5,000 per set).
    Where to buy cheaper?

    Official dealer in Russia - [autogood.ru](https://autogood.ru). You can also order on Amazon with delivery (~3 weeks).

  2. Lloyd Mats (Japan) - textile linings with a rubberized base. Suitable for those who want to maintain the “softness” of the interior. Price: 3,500–4,500 RUR.
  3. 3D MAXpider (Korea) - combined overlays with a 3D structure. They keep their shape perfectly and do not smell. The optimal choice for regions with frequent precipitation. Price: 4,000–4,500 RUR.
  4. Tepa (Russia) - budget rubber pads with 3 cm sides. They performed well in wear resistance tests. Price: 1,800–2,200 RUR.
  5. Heyner (Germany) — universal PVC pads with anti-slip coating. Suitable if you couldn’t find specialized ones for Almera. Price: 2,500–3,000 RUR.

For most owners Almera G15 the optimal choice would be 3D MAXpider or Tepa - they offer the best balance between price, quality and adaptation to the model. If your budget is not limited, pay attention to WeatherTech.

💡

Before purchasing, check reviews on forums (for example, Almera-Club.ru) - they often share photographs of installed overlays and their behavior after a year of operation.

Step-by-step instructions for installing overlays

Installation of overlays on Nissan Almera G15 It will take no more than 30 minutes if you follow the algorithm. You will need:

  • 🧰 Set of screwdrivers (phillips and flat).
  • 🧴 Silicone grease (for plastic latches).
  • 🧹 Vacuum cleaner or brush for cleaning the floor.
  • 📏 Ruler or tape measure (to check symmetry).

Step 1. Preparing the interior

Remove old rugs and thoroughly vacuum the floor. Pay attention to the areas under the pedals - sand and small stones often accumulate there. If there are stains on the carpet, treat them with a cleaner (for example, Profoam 2000).

Step 2. Checking the fasteners

B Almera G15 the pads are fixed:

  • 🔗 Plastic clips (2 pieces in front, one in back).
  • 🧲 Velcro (on some textile models).
  • 🔳 Rubber "spikes" (inserted into holes in the floor).

If the clips are broken, replace them (part number: 08831-4M000).

Step 3. Installing the front pads

  1. Lay the pads on the floor and check that they match the contours of the pedals and the central tunnel.
  2. Attach the clips to the holes near the threshold (they should click).
  3. Press the pad in the pedal area - it should lie flat, without gaps.
  4. If the overlay “walks”, secure it with double-sided tape (for example, 3M VHB).

Step 4. Installing the rear pads

Rear pads in Almera G15 usually whole. Make sure that they do not overlap the seat belts or interfere with the attachment of child seats (ISOFIX). Use clips or Velcro to secure.

Step 5. Final check

Close the doors and check:

  • ✅ The pads do not move when you press the pedals.
  • ✅ The bumpers fit tightly to the thresholds.
  • ✅ No squeaks when rubbing against plastic panels.
💡

If, after installation, the pads “play” when moving, the cause may be an incorrectly fastened clip or dirt that has gotten under them. Repeat steps 2-3.

Caring for pads: how to extend their service life?

Even the best quality pads will not last long if they are not properly cared for. Basic rules:

For rubber and PVC linings:

  • 🧼 Wash once every 2 weeks with warm water and car shampoo (for example, Karcher RM 539).
  • 🚫 Do not use brushes with hard bristles - they leave microcracks.
  • 🌞 After washing, wipe dry to avoid streaks.
  • 🛢 Once a month, apply silicone grease to the fasteners (prevents squeaks).

For textile linings:

  • 🧹 Vacuum once a week to prevent the lint from becoming clogged with sand.
  • 💦 To remove stains, use a foam cleaner (for example, Turtle Wax).
  • 🚿 Wash by hand (machine washing will deform the base).
  • ☀️ Dry in the shade - direct sunlight will fade the paint.

Pay special attention in winter sides of the linings - snow accumulates there, which, when melting, penetrates under the carpet. Once a month, remove the pads and dry the salon floor with a hairdryer.

⚠️ Attention: If cracks appear on the covers (especially PVC), replace them immediately. Through damage, moisture will get onto the metal, which will lead to rust. This is true for cars older than 5 years!

Common mistakes when choosing and installing

Even experienced car owners make mistakes that negate all the benefits of overlays. Here are the most common:

  1. Purchasing universal pads - they do not take into account the location of the pedals and the tunnel, which is why they slip or tear. Always buy a model adapted for Almera G15.
  2. Ignoring fasteners — many people simply put the pads on top without securing them with clips. As a result, they become wrinkled and interfere with control.
  3. Failure to comply with seasonality - textile linings get wet in winter, and rubber linings can “smell” in summer. It is optimal to have two sets.
  4. Using household chemicals - household products (for example, Domestos) corrode rubber and PVC. Use only auto chemicals.
  5. Improper drying — if the pads are dried on a radiator, they will become deformed. Dry them flat at room temperature.

Another typical problem is creaks. They occur if the pad rubs against plastic panels. Solution:

  • 🔧 Place a piece of felt under the edge of the overlay.
  • 💧 Treat contact points with silicone grease.

FAQ: answers to popular questions

Can rubber pads be washed in a washing machine?

No! Rubber and PVC are deformed at high temperatures and centrifugation. Wash them only by hand with warm water (up to 40°C).

Are the pads suitable for Nissan Note or Micra on Almera G15?

Partially. The front pads may be the same size, but the rear ones will be narrower, since the wheelbase is Almera longer. It’s better not to take risks and take the model specifically for G15.

How to remove the smell from new PVC linings?

Place the pads in the sun for 2-3 days or treat them with a vinegar solution (1:1 with water). Activated charcoal also helps - put a few tablets in a bag with pads at night.

Is it possible to drive without pads if the carpet is already worn out?

Technically yes, but this will lead to accelerated corrosion of the floor. If the carpet has worn down to the metal, before installing the overlays, treat the bare areas with an anti-corrosive agent (for example, Dinitrol 409).

Which pads are better for taxis or car sharing?

Optimal for commercial use rubber pads with high sides (For example, WeatherTech or Tepa Pro). They withstand frequent washing and mechanical stress. Textiles are not suitable for taxis - they quickly get dirty and wear out.