Nissan Murano Z50 is a premium crossover, which is famous not only for its comfort and dynamics, but also for its advanced multimedia system. As standard, the car is equipped with a radio with a touch screen, support Apple CarPlay/Android Auto (in later versions) and proprietary interface NissanConnect. However, even this technique requires attention: from updating maps to resetting settings in case of glitches.

In this article we will look at everything you need to know about the radio. Murano Z50: from basic functions to hidden features and repairs. You will learn how to update the firmware without the risk of “bricking” the system, what errors most often cause the screen to fail, and why sometimes after replacing the battery, the radio requires entering a code - even if there was never one. The information is relevant for restyled and pre-restyling versions of 2015–2023.

Technical characteristics of the standard radio

Radio in Nissan Murano Z50 depends on the configuration and year of manufacture. Basic versions (eg SV) received a system with a screen 7 inches, while the top ones (SL, Platinum) — 8 inches with navigation and premium acoustics Bose. Main parameters:

  • 📱 Screen: capacitive sensor, resolution 800×480 (7") or 1280×720 (8").
  • 🎵 Audio system: 6–11 speakers (depending on configuration), support Bose Active Sound Management.
  • 📡 Connections: Bluetooth (A2DP, HFP), USB (up to 2 ports), AUX, HDMI (in some versions).
  • 🗺️ Navigation: built-in maps Nissan Navigation (updated through the dealer or independently).
  • 📱 Smartphones: Apple CarPlay (since 2018), Android Auto (from 2020, requires software update).

Important: models before 2017 do not have support Android Auto — it can only be added by replacing the radio with an analogue from Nissan Rogue (compatible with connectors) or installing an after-market solution. Also, the basic versions do not have built-in navigation - it can be purchased as an option from the dealer with re-flashing.

Equipment Screen size Navigation Apple CarPlay Android Auto Bose
S (2015–2017) 7" ❌ ❌ ❌ ❌
SV (2018–2023) 7" ✅ (optional) ✅ ❌ ❌
SL (2015–2023) 8" ✅ ✅ (since 2018) ✅ (since 2020) ✅
Platinum (2015–2023) 8" ✅ (3D maps) ✅ ✅ ✅ (11 speakers)
⚠️ Attention: In radios Murano Z50 before release 2019, an outdated version is used NissanConnect, which does not support Android Auto even after the update. The only way to add a function is to replace the block with an analogue from Rogue 2020+ or installation of a universal system (for example, Pioneer AVH-X590BS).

How to update firmware and navigation maps

Radio software update Nissan Murano Z50 solves most problems: from slow performance to lack of support for new smartphones. Releases official firmware Nissan once every 1–2 years, but you can install them yourself. Upgrade options:

  • 💿 Via USB: download file from website Nissan Owners (vehicle VIN required) and write to a flash drive in the format FAT32.
  • 📱 Over the Air (OTA): Only available on 2020+ models with an active subscription NissanConnect Services.
  • 🔧 At the dealer: paid service (from 5,000 ₽), but guarantees correct installation.

Step-by-step instructions for updating via USB:

  1. Download the archive with firmware for your model (for example, Murano_Z50_2018_NAVI_v3.12.zip).
  2. Unzip the files to the root of the USB drive (format FAT32, volume up to 32 GB).
  3. Insert the flash drive into the radio port (usually located under the screen or in the glove compartment).
  4. Go to Settings → System → Software Update and select the file.
  5. Confirm installation. The process will take 20–40 minutes - don't turn off the ignition!

Download firmware from the official website (by VIN)

Format USB to FAT32

Check battery charge (minimum 70%)

Disable Bluetooth and USB devices

Do not interrupt the process until completion-->

To update navigation maps, use the same USB method, but download map files (for example, Nissan_Navi_Maps_2023_Europe.iso). Important: the cards are tied to the region - European ones are not suitable for radios with US firmware.

Apple CarPlay/Android Auto

Navigation

Bluetooth for music

Radio

Other-->

Resetting the radio to factory settings

If the radio Murano Z50 started to glitch (freezes, phone connection errors, navigation failures), first of all try resetting the settings. This will delete all saved data (favorite radio stations, Bluetooth pairs, routes), but will return the system to a working state.

Reset methods:

  • 🔄 Soft reset: go to Settings → System → Reset data and confirm the action.
  • 🔋 Hard reset: Disconnect the battery for 10-15 minutes (will also reset the climate control settings!).
  • 🔧 Hidden combination: hold down the buttons Menu + Nav + Power for 10 seconds (does not work on all versions).

After a reset, you may need to reactivate Apple CarPlay or Android Auto — to do this, connect your phone via USB and confirm the permissions on the radio screen. If the reset does not help, the problem may be in the hardware (for example, a faulty sensor or control unit).

⚠️ Attention: On some radios Murano Z50 After reset, you are prompted for input unlock code (even if it wasn't there before). The code can be obtained from the dealer using the VIN or using online services (for example, RadioCode). Do not enter the code at random - after 3 incorrect attempts, the system will be blocked for 1 hour.

Common problems and their solutions

Owners Murano Z50 often encounter typical radio malfunctions. Here are the most common of them and ways to eliminate them:

Problem Possible reason Solution
The screen does not respond to touches Sensor contamination, software failure, cable damage Wipe the screen with alcohol, reset settings, check the cable (requires disassembly)
Bluetooth doesn't work Synchronization failure, outdated firmware Delete all paired devices, update software, reset settings
Navigation shows wrong location Outdated maps, weak GPS signal Update maps, check GPS antenna (located under the dashboard)
The radio does not turn on Power problems, fuse blown Check fuse F37 (10A) in the block under the hood, measure the voltage at the connector
The sound is distorted or disappears Amplifier malfunction, contact oxidation Check the speaker connectors, test the radio in another car

If the radio is completely “dead” (does not respond to buttons, the screen is black), first check the fuse. B Murano Z50 The fuse is responsible for multimedia F37 (10A) in the main unit (under the hood, next to the battery). If the fuse is intact, the problem may be in the control unit or wiring harness.

What should I do if the radio requires a code after replacing the battery?

After disconnecting the battery, some radios Nissan activate protection and require entering a 4-digit code. It can be found:

1. In the documents for the car (sometimes the code is indicated on a sticker in the glove compartment or service book).

2. On the website Nissan Radio Code by serial number of the radio (you need to enter VIN).

3. From an authorized dealer (payment may be required).

If the code is lost, do not try to find it - after 10 incorrect attempts, the radio will be blocked forever and will require flashing.

Replacing the radio with an analogue or after-market system

If the standard radio Murano Z50 not satisfied (for example, due to lack of Android Auto or slow operation), it can be replaced with a more modern one. Options:

  • 🔄 Original analogue: radio from Nissan Rogue 2020+ (supports Android Auto, connector compatible).
  • 📱 Universal system: for example, Pioneer AVH-X590BS or Sony XAV-AX5500 (requires adapter frame and rear view camera adapter).
  • 🎵 Premium option: Alpine iLX-F411 (wireless CarPlay/Android Auto, high sound quality).

When replacing, consider:

  • Maintaining steering wheel functions (volume control, answering calls) requires an adapter (for example, Metra ASWC-1).
  • The rear view camera is connected via a special connector - in some cases a signal converter is needed.
  • In radios with Bose You may need an amplifier emulator (for example, Nissan Bose Amp Bypass Harness).

Average replacement cost:

  • Radio tape recorder + adapters: 30,000–80,000 RUR.
  • Installation by professionals: 5,000–15,000 RUR.
⚠️ Attention: When installing an aftermarket radio in Murano Z50 with the system Bose Possible sound deterioration. The fact is that the standard amplifier Bose optimized for the original radio. The solution is to use a sound processor (for example, JL Audio FiX 86) or complete replacement of acoustics.

Hidden features and lifehacks

Radio tape recorder Nissan Murano Z50 has several hidden features that few people know about:

  • 🎚️ Engineering menu mode: press Menu + Map + Power for 5 seconds. Here you can test the sensor, check the software version and calibrate the screen.
  • 🔊 Disable warnings: in sound settings (Settings → Sound → Alerts) you can reduce the volume of the parking sensors and seat belt signals.
  • 📻 Hidden radio stations: In FM mode, press Menu → Advanced → Manual Tuning and enter the frequency manually (for example, 87.5 MHz for some European stations).
  • 📱 Quick CarPlay connection: If the radio “thinks” for a long time when connecting the iPhone, turn off Wi-Fi in the phone settings - this will speed up the synchronization.

Another useful life hack: if navigation often fails, try resetting your GPS data. To do this:

  1. Go to Settings → Navigation → Reset GPS data.
  2. Confirm the reset and reboot the radio (turn off/on the ignition).
  3. Wait for the location to be determined again (may take up to 5 minutes).
💡

If the radio Murano Z50 started to slow down, try disabling interface animation. To do this, go to Settings → Display → Animation and select "Fast" mode. This will speed up the menu by 20–30%.

Repair and troubleshooting

If the radio Murano Z50 is out of order, do not rush to change it - many problems can be solved by repair. Common malfunctions and their diagnosis:

  • 🔥 Fuse blown: check F37 (10A) And F10 (15A) in the fuse block.
  • 📶 The sensor does not work: most often the cable is to blame (replacement cost - 3,000–5,000 ₽).
  • 🔊 No sound: Check the speaker connections and amplifier (in versions with Bose it is located in the trunk).
  • 🖥️ Screen flickers or goes blank: the problem is in the backlight inverter (repair will cost 8,000–12,000 ₽).

You can use a scanner for diagnostics ELM327 (connects to OBD-II connector). It is used to check errors on the CAN bus associated with the multimedia system (for example, U1000 — loss of communication with the control unit).

Average prices for repairs:

Malfunction Repair cost (₽) Cost of spare parts (₽)
Replacing the sensor 4 000–6 000 3 000–5 000
Backlight inverter repair 8 000–12 000 2 000–4 000
Replacing the cable 3 000–5 000 1 500–2 500
Flashing after a failure 5 000–10 000 0 (if there is official firmware)
💡

Before repairing the radio Murano Z50 Always check fuses and connectors. In 30% of cases, the problem lies in oxidized contacts or a blown fuse, and not in the radio itself.

FAQ: Frequently asked questions about the Nissan Murano Z50 radio

Can I install Android Auto on my 2016 Murano Z50 radio?

No, officially this is not possible. Models before 2020 lack hardware support Android Auto. Solutions:

  • Replace the radio with an analogue one from Nissan Rogue 2020+ (compatible by connectors).
  • Install a post-market system (for example, Pioneer AVH-X590BS).
  • Use screen mirroring via Carlinkit or AAWireless (works unstable).
Why does the radio ask for a code after replacing the battery?

This is standard theft protection. The code can be:

  • Find it in the car documents (sometimes a sticker in the glove compartment).
  • Get it on the website Nissan Radio Code by VIN.
  • See dealer (fee may apply).

Do not enter the code at random - after 10 incorrect attempts, the radio will be blocked forever.

How to reset navigation settings if it's lying?

Go to Settings → Navigation → Reset GPS data and confirm the action. If this doesn't help:

  1. Update your maps via the official website Nissan.
  2. Check the GPS antenna (located under the dashboard).
  3. Perform a complete reset of the radio (in Settings → System).
Which fuses are responsible for the radio?

B Murano Z50 Responsible for multimedia:

  • F37 (10A) — main power supply for the radio.
  • F10 (15A) - sound amplifier (in versions with Bose).
  • F22 (7.5A) — screen backlight.

The fuse box is located under the hood, next to the battery.

Is it possible to connect a rear view camera from another car?

Technically yes, but you will need:

  • Adapter for signal (eg Nissan Camera Emulator).
  • Connector matching (in Murano Z50 used RCA or LVDS, depending on the year).
  • Settings in the engineering menu (enabling support for non-standard cameras).

It's better to use a camera from Nissan Rogue or X-Trail - they are protocol compatible.