Windshield Nissan Serena C26 (2012–2022) is a critical safety element that is often overlooked. This is not just a “window to the world”, but a complex design that affects the rigidity of the body, the operation of ADAS systems (if installed) and even the aerodynamics of the minivan. Owners Serena face unique challenges: from finding original glass with the right VIN code before dealing with the “whistle” after an unskilled replacement.

In this article we will analyze all the nuances — from technical parameters (sizes, article numbers, types of tinting) to step-by-step instructions for replacement, taking into account the features C26. We will pay special attention glass edge corrosion problem - a typical “disease” of this generation, which manifests itself after 3–5 years of operation. You will also find current prices for 2026, comparison of original glasses with analogues from Pilkington, Saint-Gobain Sekurit And Fuyao, as well as care tips that will extend the life of new glass by 30–40%.

Windshield Specifications Nissan Serena C26

Glass for Serena C26 has unique parameters that depend on the configuration and year of manufacture. Basic sizes: 1450 × 900 mm (length × height), but for versions with panoramic roof or option Intelligent Around View Monitor Modifications with other bend radii may be required. The standard glass thickness is 4.8 mm (two-layer laminated), but in some markets (for example, Japan) glass with increased sound insulation (5.2 mm).

Key articles of original glass:

  • 🔹 28510-4M00A — basic version (2012–2016), without rain/light sensors;
  • 🔹 28510-4M01A — with a camera mounting area Around View Monitor (since 2017);
  • 🔹 28510-4M02A - for versions with ProPilot (requires ADAS calibration after replacement);
  • 🔹 28510-JM00A — Japanese version with enhanced sound insulation.

Important: glass for Serena C25 (previous generation) don't fit — the shape of the lower corners and the mountings for the wipers are different. Please also note the availability green stripe in the upper part (UV protection) - some analogues do not have it, which leads to burnout of the dashboard.

📊 What kind of glass is installed on your Serena C26?
  • Original (Nissan)
  • Pilkington
  • Saint-Gobain Sekurit
  • Fuyao
  • Other/don't know

Original vs analogues: what to choose for Nissan Serena C26

Original glass from Nissan (manufacturer - Asahi Glass Co.) guarantees 100% compatibility, but its price in 2026 starts from 45,000 rubles (excluding work). Analogues are cheaper, but require a careful approach. Let's compare the main options:

Manufacturer Article Price (RUB) Pros Cons
Nissan (OEM) 28510-4M01A 45 000–55 000 Perfect fit, no whistling, ADAS compatible Expensive, long delivery times
Pilkington PNG 14509 28 000–35 000 Good sound insulation, close to the original There may be problems with attaching the wipers
Saint-Gobain Sekurit SG 1450900 25 000–32 000 Lightweight (1.2 kg less than the original), resistant to chips Thin green stripe (worse UV protection)
Fuyao FY 14509 18 000–24 000 Budget option, fast production Frequent complaints of “whistle” at speeds >100 km/h

⚠️ Attention: If your Serena C26 equipped with a system ProPilot or Intelligent Cruise Control, installation of non-original glass may lead to incorrect operation of radars. In this case, mandatory calibration is required at a service station with equipment Nissan Consult (cost - from 8,000 rubles).

Advice: when purchasing an analogue, check availability ECE R43 certificate (European safety standard). Glass without a certificate may have distortions that lead to headaches on long trips.

Step-by-step instructions for replacing a windshield

Replacing glass with Serena C26 more difficult than most sedans due to:

  • 🔧 Reinforced adhesive seam (requires a special knife for cutting);
  • 🔧 Integrated antennas (at the top of the glass);
  • 🔧 Rain/light sensor (if disconnected incorrectly, an error occurs B2600).

To work you will need:

Special knife for cutting glass (for example, U-Pol Glass Knife)

Set of plastic spatulas for removing moldings

Sealant 3M Windshield Urethane> (item 08609)

Primer for glass (Betz 7500> or equivalent)

Vacuum cleaner for cleaning the interior from debris

Set of socket wrenches (for removing wipers and plastic panels)

Multimeter (to check the rain sensor circuit) -->

⚠️ Attention: Do not use wire method for cutting old glass - on Serena C26 it often hurts waterproofing membrane under the windshield, which leads to leaks into the cabin. Correct procedure:

  1. Remove the wipers (key on 14 mm) and a plastic cover under the glass (latches on the sides).
  2. Disconnect the rain sensor connector (located under the plastic cover in the center of the glass).
  3. Apply warming gel (For example, Permatex 81730) onto the glue line and wait 15 minutes.
  4. Carefully cut the glass with a knife, starting from the upper right corner (the seam is thinner there).
  5. Remove any remaining sealant and clean the surface degreaser (do not use acetone!).

When installing new glass:

  • 🔹 Apply primer to the edge of the glass and body (2 layers with an interval of 5 minutes).
  • 🔹 Use new moldings - old ones often lose elasticity.
  • 🔹 Secure the glass with clamps and leave for 4-6 hours (minimum!) for the sealant to polymerize.

1) The tightness of the moldings in the lower corners of the glass;

2) Correct installation of the seal under the hood (they often forget to put it back in place);

3) Quality of sealant - cheap analogues can shrink.-->

Typical problems after replacement and how to avoid them

Even after professional replacement, owners Serena C26 face typical problems:

  1. "Whistling" at high speed - in 80% of cases it is caused by improper installation of moldings or the use of low-quality sealant. Solution: reinstall the seals using 3M Super Weatherstrip Adhesive.
  2. Error C1A10 (radar malfunction) — occurs if the glass is displaced by more than 2 mm from the standard position. Requires reinstallation with laser alignment.
  3. Leaks into the interior - most often due to damage to the drainage tubes under the glass. Check their integrity to installation of new glass!
  4. Camera Image Distortion Around View - if the glass is deformed during transportation. Before installation, check it for flat surface (should lie without gaps).

⚠️ Attention: If after replacement there is creaking in the glass area when driving over uneven surfaces, this is a sign that the sealant has not completely polymerized. In this case you can't wash the car and operate it at speeds >60 km/h for 48 hours.

What should I do if the rain sensor does not work after replacement?

1. Check the integrity of the connector (it is often damaged when removing the glass).

2. Measure the resistance of the sensor with a multimeter - it should be 5–10 kOhm.

3. If the sensor is working properly, reset the errors via Nissan Consult (procedure Erase DTC).

4. In extreme cases, it may be necessary to replace the sensor (part number 28520-4M000, price ~12,000 rub.).

Windshield Care: How to Extend Its Life

The average lifespan of a windshield is Serena C26 - 5–7 years, but with proper care it can be increased to 10 years. The main enemies of glass:

  • 🌡️ Sudden temperature changes (for example, washing with hot water in winter);
  • 🧂 Reagents and sand (lead to microcracks);
  • 🔧 Improper cleaning (abrasive wipes, products with ammonia).

Care instructions:

  • 🔹 Wash glass by special means (For example, Sonax Glass Cleaner) with a microfiber cloth.
  • 🔹Apply hydrophobic coating (For example, Rain-X) every 3 months - this reduces the risk of stone chips.
  • 🔹 In winter don't turn on the stove at full power until the glass warms up (risk of stress cracks).
  • 🔹 Treat the glass edge once a year silicone grease (prevents corrosion of the metal under the seal).

To remove small chips (up to 1 cm) use repair kits (eg Permatex Windshield Repair Kit). But remember: if the crack reaches glass edges or length >10 cm, repair is useless - replacement is required.

💡

Never ignore even small chips! On Serena C26 due to vibrations from the engine MR20DD they will turn into a crack in 2–3 months.

Glass edge corrosion: how to deal with the “disease” Serena C26

One of the most common problems Serena C26 — metal corrosion under the windshield seal. Reasons:

  • 💧 Water leaks through drainage holes (clogged with leaves);
  • 🔋 Electrochemical corrosion due to the close location of the antenna wires;
  • 🛠️ Poor quality galvanization bodies on some batches (2013–2015).

Signs of a problem:

  • 🔹 Rusty leaks under the seal;
  • 🔹 “Bloating” paint at the junction of glass and body;
  • 🔹 Constant moisture on the driver's side mat.

Solution:

  1. Remove the seal and clean the edge sandblaster (it won't work by hand!).
  2. Apply rust converter (For example, Loctite 7507).
  3. Treat the surface zinc spray (Zinc Rich Primer).
  4. Install the seal on new sealant (don't use the old one!).

⚠️ Attention: If corrosion has eaten through the metal, you will need welding the patch. In this case, it is better to contact bodybuilders who specialize in Nissan - standard workshops often do not know the design features Serena C26.

FAQ: Frequently asked questions about windshields Nissan Serena C26

Is it possible to install glass from Nissan Elgrand? It looks similar.

No, despite the external similarity, glass Elgrand have a different bending radius and mountings for wipers. Installing such glass will lead to leaks And incorrect operation of the windshield wipers.

How much does it cost to replace ADAS calibrated glass?

In official services Nissan price starts from 60,000 rubles (including glass and labor). In trusted auto glass workshops - from 35,000 rubles, but check if they have calibration equipment ProPilot (not all service stations work with Nissan Consult IV).

Is it possible to drive with a crack if it does not interfere with your view?

Technically yes, but not recommended. On Serena C26 a crack can lead to:

  • 🔹 Tint peeling off (if it exists);
  • 🔹 Moisture ingress between layers of glass (a cloudy coating will appear);
  • 🔹 Problems with passing technical inspection (a crack >10 cm long is a reason for refusal).

How to check whether the original glass is installed?

Original glass Nissan has:

  • 🔹 Logo ASahi Glass in the bottom corner;
  • 🔹 Serial number corresponding Vehicle VIN;
  • 🔹 Hologram with the inscription Nissan Genuine.

Analogs are usually marked only with the manufacturer’s logo (for example, Pilkington).

What to do if after replacing the glass there is a smell of glue in the interior?

This is normal for the first 2-3 days. To speed up weathering:

  • 🔹 Warm up the salon in the sun with open windows;
  • 🔹 Use ozonator (rent costs ~500 rub/day);
  • 🔹 Do not smoke in the car - tobacco smoke reacts with sealant vapors.

If the smell has not disappeared after a week, the glass was installed incorrectly (too much sealant or it is of poor quality).