Alloy wheels on Nissan Note - this is not just a tuning element, but an important detail that affects the safety, handling and appearance of the car. Compact hatchback Note, popular in urban environments, requires a special approach to the selection of wheels: a balance between style, durability and compliance with factory parameters is important here. The wrong choice can lead to problems with the suspension and incorrect operation ESP or even refusal to undergo technical inspection.

In this article we will look at all key aspects: from original sizes and offsets to compatibility with winter tires, popular brands and installation nuances. We will pay special attention unique parameters Nissan Note (for example, minimum ground clearance of 150 mm and hub mounting features), which are often ignored when choosing wheels. You will also find practical care tips, warnings about common mistakes and answers to frequently asked questions from owners.

Original sizes of alloy wheels for Nissan Note: compatibility table

Factory disk settings for Nissan Note depend on the generation and configuration. For example, models E11 (2004–2012) and E12 (2012–2020) have different width and reach tolerances. Below is a table with official data for the most common versions:

Generation Year of manufacture Diameter (inches) Width (inches) Reach (ET, mm) PCD (bolt pattern) DIA (hub diameter, mm)
Nissan Note E11 2004–2012 14–15 5.0–6.0 35–40 4×100 66.1
Nissan Note E12 (dorestyle) 2012–2016 15–16 5.5–6.5 38–42 4×100 66.1
Nissan Note E12 (restyle) 2016–2020 15–17 6.0–7.0 38–45 4×100 66.1
Nissan Note Aura (Japan) 2020–present 16–18 6.5–7.5 40–48 4×100 66.1

⚠️ Attention: Discs with diameter over 17 inches require modification of the arches or the use of low-profile tires (which negatively affects comfort). Also note PCD 4×100 - this is the standard for most Japanese compacts, but some Chinese replicas may have deviations in the bolt pattern of up to ±0.5 mm, which will lead to steering wheel beating.

For an accurate selection, use VIN code vehicle or data from the plate on the door pillar. For example, if on your Note E12 there are standard wheels 6J×15 ET40, then the maximum permissible overhang for disks 7J×16 will be ET38 (with tire width 205/50 R16).

📊 What is the diameter of the rims on your Nissan Note?
  • 14–15 inches
  • 16 inches
  • 17 inches
  • 18+ inches
  • I don't know

How to choose alloy wheels: 5 criteria for Nissan Note

The choice of alloy wheels is a compromise between aesthetics, reliability and budget. For Nissan Note especially important:

  • 🔧 Material and casting technology. The best option is wheels made of aluminum-magnesium alloy (markings A356 or A356.2), made using the method low pressure casting (low pressure). They are 30-40% lighter than steel and better remove heat from the brakes.
  • ⚖️ Weight. Disk for Note should not weigh more than 7-8 kg (for 15-16 inches). Heavy discs increase the load on the wheel bearings and reduce acceleration dynamics.
  • 📏 Geometry. Check availability Humpov (protrusions for fixing a tubeless tire) and the radius of the bolt holes. For example, for Note E12 critical center hole diameter (DIA) 66.1 mm - even a deviation of 1 mm will require the use of adapter rings.
  • 🎨 Design. For a city hatchback, wheels with 5–7 knitting needles or mesh design (mesh structure). Avoid overly aggressive models with deep recesses - they are more difficult to maintain and accumulate dirt faster.
  • 🛡️ Certification. The disc must have markings TÜV (Germany), JWL (Japan) or SAE (USA). The absence of a certificate is a sign of a fake or low-quality replica.

💡 Helpful tip: When purchasing, check the disc for radial and axial runout using a balancing stand. Permissible deviation is no more than 0.5 mm. Even new wheels from well-known brands (for example, Enkei or BBS) may have casting defects.

Check compatibility by vehicle VIN|

Measure the ground clearance taking into account future tires |

Make sure you have a quality certificate|

Compare the weight of the disc with the factory equivalent|

Check the complete set (bolts, centering rings) -->

The best brands of alloy wheels for Nissan Note: 2026 ranking

There are hundreds of brands on the market, but for Nissan Note We recommend manufacturers who specialize in lightweight and durable wheels for compact cars. Below are the top 5 proven brands, taking into account the price/quality ratio:

  1. Enkei (Japan). Leader in casting technology. Models Enkei PF05 (15-16 inches) and Enkei Raijin (17 inches) ideal for Note thanks to a weight of 6.2 kg and reinforced spokes. Average price: 12,000–18,000 RUR per disc.
  2. BBS (Germany/Japan). Legendary discs with molding technology (not casting!). BBS CH-R (16 inches) weighs only 5.8 kg, but is expensive - from 25,000 ₽. Optimal for tuned versions.
  3. OZ Racing (Italy). Discs OZ Superturismo (15-17 inches) popular among owners Note due to the aggressive design and price from 9,000 ₽. The downside is that they require frequent polishing.
  4. Advanti Racing (Taiwan). Budget premium. Model Advanti Storm S1 (16 inches, ET40) costs ~8,500 RUR and has a reinforced design for bad roads.
  5. Kosei (Japan). Lightweight wheels for everyday use. Kosei K1-TS (15 inches) weighs 5.3 kg and costs from 10,000 ₽. Suitable for winter set.

⚠️ Attention: Avoid Brands Replica, Dezent (Chinese fakes) and nameless manufacturers from AliExpress. Such discs often have hidden cracks in the places where the spokes are attached, which appear after 10,000–15,000 km. Example: disk "Style 5" without marking may burst if caught in a hole at a speed of 60+ km/h.

For savings, consider used wheels from Japanese auctions (For example, Yahoo! Auctions). Original Nissan or Enkei in good condition will cost 2-3 times cheaper than new ones. The main thing is to check them for ultraviolet lamp (traces of repair by welding will glow).

Installing alloy wheels on Nissan Note: step by step instructions

You can install alloy wheels yourself, but there are nuances that are often overlooked. For example, incorrect tightening of bolts (not in a criss-cross pattern) leads to hub deformation. Let's look at the process step by step:

  1. Preparation. Jack up the car and remove the wheel. Clean the hub from rust and dirt (use wire brush And WD-40). Check the bolt threads - they should be clean and free of burrs.
  2. Compatibility check. Make sure that:
    • 🔹 The diameter of the central hole of the disk coincides with DIA 66.1 mm (or use an adapter ring).
    • 🔹 The bolts are the correct length (standard for Note — M12×1.25, length 25–28 mm).
    • 🔹 Wheel humps correspond to the tire profile (for example, for rubber 195/55 R16 needed full hum).
  • Installation. Place the disc on the hub, screw in the bolts manually (no tools!) and tighten them criss-cross moment 90–110 Nm (use a torque wrench).
  • Balancing. After installing all wheels necessarily do balancing on the stand. Even a new disc can have an imbalance of up to 15–20 grams.

    • 💡 Helpful tip: If you have Nissan Note with ESP, after replacing the disks, run ABS sensor calibration. To do this:

    1. Заведите автомобиль.

    2. Поверните руль до упора влево, затем вправо.
    

    3. Проедьте 100 метров по прямой со скоростью 40–50 км/ч.

    This will reset errors in the directional stability system that may appear due to changes in the moment of inertia of the wheels.

    What happens if you don't tighten the bolts?

    Loose bolts lead to the disc “unscrewing” while driving, especially when driving over uneven surfaces. For example, if you hit a hole at a speed of 80 km/h, an unfixed disc can move by 2-3 mm, which will cause the steering wheel to wobble and damage the hub. In the worst case, the wheel will fall off.

    Compatibility of alloy wheels with winter tires: what you need to know

    For winter use Nissan Note disks with reinforced humps And reduced reach (2–5 mm less than summer). This is due to:

    • ❄️ Heavy weight of winter tires. For example, a tire 185/60 R15 weighs 1.5–2 kg more than the summer one 195/50 R16.
    • 🛑 Increased load on the suspension. Winter tires with a soft compound create additional resistance, which leads to an increase in the temperature of the wheel bearings.
    • ⚙️ Risk of corrosion. Salt and reagents quickly destroy the paintwork of alloy wheels, especially in the places where the spokes are attached.

    🔹 Recommendations for selection:

    • 🔸 For Note E11 discs are optimal 6J×15 ET38 with rubber 185/60 R15.
    • 🔸 For Note E12 — 6.5J×16 ET40 and tire 195/50 R16.
    • 🔸 Avoid discs with deep recesses — snow and ice accumulate in them, which impairs balancing.

    ⚠️ Attention: Do not use summer alloy wheels in winter without protective coating (For example, ceramic layer or powder paint). Low temperatures make aluminum brittle, and reagents cause intercrystalline corrosion, which is not visible from the outside, but destroys the disk from the inside.

    💡

    For a winter set, choose wheels with markings Snowflake or Winter Approved — they undergo additional tests for impact resistance at -30°C.

    Tuning and non-standard sizes: risks and opportunities

    Many owners Nissan Note want to install larger disks - for example, 18 inches instead of standard 15–16. It's possible, but requires compromises:

    • 🚗 Maximum dimensions without modifications:
      • 🔹 Note E11: 17×7.0 ET35 with rubber 205/40 R17.
      • 🔹 Note E12: 18×7.5 ET40 with rubber 215/35 R18.
    • ⚠️ Consequences:
      • 🔹 Reducing ground clearance by 10–15 mm (risk of damage to fender liners).
      • 🔹Increasing the load on shock absorbers by 20–30%.
      • 🔹 Reducing the resource of wheel bearings by 1.5–2 times.

    💡 How to minimize risks?

    1. Install shortened springs (For example, Tein S.Tech or H&R) with a hardness 15–20% higher than standard.
    2. Use high profile tires (For example, 205/50 R17 instead of 205/40 R17).
    3. Check wheel alignment every 5,000 km (non-standard wheels change settings faster).

    📌 An example of successful tuning: Owner Note E12 installed disks Work Emotion CR Kiwami 17×7.5 ET38 with rubber 205/45 R17 and springs Tanabe NF210. Result: the ground clearance decreased by 12 mm, but handling improved due to reduced roll in corners.

    Caring for alloy wheels: how to extend their service life

    Alloy wheels on Nissan Note require regular maintenance, especially on Russian roads. Basic rules:

    • 🧼 Washing. Use acid-free shampoos (For example, Sonax Full Effect) and a soft brush. Do not use Karcher under high pressure - this damages the paintwork.
    • 🛡️ Protection. Apply ceramic coating (For example, Ceramic Pro 9H) or wax (Collinite 845) - this will protect against reagents and make it easier to clean from bitumen stains.
    • 🔧 Check. Every 10,000 km, inspect the disc for:
      • 🔹 Cracks in the places where the knitting needles are attached.
      • 🔹 Corrosion on the inside (especially for discs without powder paint).
      • 🔹 Rim deformation (checked dial indicator).
    • 🚘 Storage. If discs are seasonal, store them in microfiber covers (For example, Michelin Wheel Bag) at a temperature of +5...+20°C and humidity up to 50%. Do not stack discs as this will distort the rim.

    ⚠️ Attention: Never use to clean disks abrasive pastes (For example, Autosol) or metal brushes. They scratch the surface, which leads to pitting corrosion. To remove stubborn dirt (such as brake dust), use special cleaners (Iron X or CarPro TarX).

    💡 Helpful tip: If the disc is scratched, do not paint it spray paint from a can. It peels off after 2–3 months. It is better to contact a workshop for powder painting (cost ~3,000 ₽ per disk, but lasts 3–5 years).

    Frequently asked questions about alloy wheels Nissan Note

    Is it possible to install wheels with a 4x114.3 bolt pattern instead of 4x100?

    No, it's unacceptable. Bolt pattern 4×114.3 (for example, from Nissan Juke) is incompatible with 4×100 due to different bolt diameters. The use of adapters or "eccentric bolts" results in:

    • 🔹 Uneven tightening (risk of unscrewing while moving).
    • 🔹 Vibrations at speeds above 80 km/h.
    • 🔹 Refusal of technical inspection (according to traffic rules clause 5.5).

    The only exception is discs with universal bolt pattern (For example, Mutsu Modular M70), but they cost from 30,000 ₽ each.

    What is the maximum reach (ET) for the Note E12?

    For Note E12 safe departure range - from ET35 to ET45. Exceeding these values leads to:

    • 🔹 ET < 35: the disc protrudes beyond the arch, risk of damage when parking.
    • 🔹 ET > 45: the disc rests against the brake caliper (on versions with ABS).

    For an accurate calculation, use departure calculator (for example, on the website WillTheyFit.com).

    What bolts are needed for alloy wheels on Note?

    For Nissan Note All generations use bolts:

    • 🔹Carving: M12×1.25.
    • 🔹 Length: 25–28 mm (for discs up to 20 mm thick).
    • 🔹 Material: chrome molybdenum steel (labeling 10.9).

    ⚠️ Important: Bolts for alloy wheels must have cone fit (60° angle) rather than flat. Using unsuitable bolts will result in microcracks in the disc holes.

    Is it possible to restore a bent alloy wheel?

    Yes, but not always. The disk can be recovered if:

    • 🔹 Only the rim is bent (no cracks in the spokes).
    • 🔹 Deformation does not exceed 3–5 mm.
    • 🔹 The disc has not been subjected to shock load (for example, after an accident).

    The cost of recovery is from 2,000 ₽ per disk (method rolling on a machine). However, after repair, the disc loses up to 20% of its strength, so it not recommended for use on the front axle.

    Which wheels are better: cast or forged?

    For Nissan Note alloy wheels preferable in 90% of cases. Benefits:

    • 🔹 2-3 times cheaper than forged ones.
    • 🔹 They dampen vibrations better (important for a compact car).
    • 🔹More design options.

    Forged wheels (BBS LM, OZ Leggera) are justified only for sports use (for example, on the track), since they are 15–20% lighter, but cost from 40,000 rubles apiece.