Lenses for Nissan Almera N16: how to choose, replace and upgrade optics

Nissan Almera N16 is a legendary sedan that still remains popular due to its reliability and ease of maintenance. However, over time, even the highest quality optics lose brightness, become cloudy or fail. If your car does not “punch” the road at night, and standard lamps H4 or H7 can no longer cope - it's time to think about replacing lenses or upgrading headlights.

In this article we will look at everything you need to know about lenses for Almera N16: from original catalog numbers to inexpensive analogues, from step-by-step instructions for replacement to tuning for xenon or LED. And also - unique data on the compatibility of lenses from other Nissan models that fit the N16 without modifications.

Original lenses for Nissan Almera N16: articles and features

Factory optics Almera N16 (2000–2006) was equipped with two types of lenses, depending on the configuration and the sales market. In Europe, headlights with low beam lens, whereas in Asian versions (e.g. Nissan Sunny N16) reflective units could be installed. Original lenses are produced by the company Stanley Electric (Japan) and have the following articles:

Lens type	Article	Applicability	Cost (guideline)
Low beam lens (right)	26110-4M000	Almera N16 (Europe, 2000–2003)	8 000–12 000 ₽
Low beam lens (left)	26110-4M001	Almera N16 (Europe, 2000–2003)	8 000–12 000 ₽
Near/far lens (universal)	26110-4M025	Almera N16 (Asia, 2003–2006)	9 500–14 000 ₽
Lens set (pair)	26110-4M000 + 26110-4M001	Complete replacement of optics	16 000–24 000 ₽

Original lenses are distinguished by high quality glass and precise focusing of the light beam, but their main disadvantage is the price. In addition, over time, plastic elements may turn yellow and the mirror coating may become dull. If your budget is limited, it is worth considering analogues from trusted manufacturers.

⚠️ Attention: When purchasing original lenses, check for the presence of a hologram Stanley Electric on the body. Counterfeits often have inaccurate geometry, which results in light scattering and blinding oncoming drivers.

Analogs of original lenses: what to choose for replacement

The market offers dozens of alternatives to original lenses for Almera N16, but not all of them are of equal quality. We have selected proven brands that guarantee compatibility and durability:

• 🔹 Depo — budget option (items 335-1109-R And 335-1109-L). Price: 3,500–5,000 RUR per pair. The downside is that there may be errors in light distribution.
• 🔹 TYC — middle price segment (articles 20-6210-00-1 And 20-6210-00-2). Price: 6,000–8,000 RUR. Plus - UV-resistant coating.
• 🔹 Hella — premium replacement (articles 1DL 008 631-001 And 1DL 008 631-011). Price: 12,000–15,000 RUR. The advantage is ideal geometry and service life of up to 10 years.
• 🔹 Bosch — universal lenses (item no. 1 987 302 040 for right and left sides). Price: 7,000–9,000 RUR. Suitable for tuning under xenon.

When choosing an analogue, pay attention to base type - for Almera N16 relevant H4 (near+far) and H7 (close only). Also check if the lens is suitable for right or left light (in Europe and Russia different light distribution schemes are used).

How to replace lenses on a Nissan Almera N16 yourself: step-by-step instructions

Replacing lenses with Almera N16 does not require special skills, but will require accuracy and patience. The whole process will take about 2–3 hours. You will need:

• 🔧 Screwdriver set (phillips, flat)
• 🔥 Construction hair dryer (to soften the sealant)
• 🧴 Sealant for headlights (for example, ABRO WS-904)
• 🧤 Gloves (to avoid leaving fingerprints on the glass)

Step-by-step algorithm:

1. Removing the headlight. Disconnect the negative terminal of the battery, then unscrew the headlight mounting bolts (2 on top and 1 on bottom). Disconnect the power connector.
2. Disassembling the block. Heat the sealant around the perimeter of the glass with a hairdryer (temperature ~100°C). Carefully pry the glass with a flathead screwdriver and remove it.
3. Removing the old lens. Unscrew the 3 screws securing the lens to the headlight housing. Disconnect the lamp power connector.
4. Installing a new lens. Place the lens into the slots and secure with screws. Make sure that it is level - distortions will lead to incorrect light distribution.
5. Headlight assembly. Apply new sealant to the edge of the glass and press it against the body. Secure with clamps for 1–2 hours.

⚠️ Attention: If after replacement the light begins to “float” or blind oncoming drivers, check headlight adjustment at the stand. Even a slight misalignment of the lens can result in incorrect focusing.

Lens tuning: xenon, LED and bi-xenon for Almera N16

Standard halogen lamps in Almera N16 Owners are often not satisfied with their brightness. The solution is to modernize the optics for xenon, LED or bi-xenon. However, there are nuances here:

• 💡 Xenon (HID). Requires installation lenses with projector (For example, Morimoto Mini D2S), otherwise the light will be blinding. Average price of a set: 15,000–20,000 rubles.
• 🔦 LED lenses. The best option is Osram LEDriving HL or Philips X-tremeUltinon. Important: you need lenses with a cooling radiator.
• 🔄 Bixenon. Allows you to switch between low and high beam. Popular lenses Sho-Me G5 with a motor.

When tuning, be sure to consider legal restrictions: in Russia, xenon is allowed only in lensed headlights with a washer and auto-corrector. LED lamps in halogen headlights H4/H7 officially prohibited (fine 500 rubles under Article 12.5 of the Administrative Code).

What happens if you install xenon without lenses?

Without a projector, xenon light scatters chaotically, blinding oncoming drivers. This is not only dangerous, but also fraught with deprivation of rights for 6–12 months (under Article 12.5 Part 3 of the Administrative Code).

If you decide to do tuning, we recommend contacting trusted professionals. For example, studios are popular in Moscow and St. Petersburg XenonShop And LightTuning, where they offer ready-made turnkey solutions with a guarantee.

Frequent problems with Almera N16 lenses and ways to solve them

Over the years, lenses Almera N16 they begin to act up. Here are the most common faults and what to do about them:

Problem	Reason	Solution
The light has become dim	Cloudy glass or reflector	Glass polishing paste 3M or lens replacement
Light "floats" when moving	Wear of lens mounting springs	Replacing springs or the entire lens assembly
Condensation inside the headlight	Depressurization of joints	Drying the headlight and resealing it
The lens gets hot and cracks	Overheating from powerful lamps (over 60W)	Replacement with standard wattage or LED lamps

If the lens is cracked or the optics constantly fog up, do not delay repairs. Moisture inside the headlight leads to oxidation of the contacts and failure of the ignition unit (in the case of xenon).

Compatibility of lenses from other Nissan models

Interesting fact: lenses from some models Nissan suitable for Almera N16 without modifications. This is true if original parts are difficult to find or are too expensive. Here are the tested options:

• 🚗 Nissan Primera P12 (2002–2007). Lenses with articles 26110-4M200 (right) and 26110-4M201 (left) 90% compatible. Some minor adjustment of the fasteners will be required.
• 🚗 Nissan Sunny B15 (1998–2004). Lenses 26110-4M100 They fit, but have a different power connector (need to be soldered).
• 🚗 Nissan Bluebird Sylphy (G10). Articles 26110-4M600 And 26110-4M601 identical in seating, but differ in the shape of the reflector.

Before purchasing non-original lenses, be sure to check the dimensions and mounting diagram. For example, lenses from Primera P12 slightly narrower, so may require the installation of adapter plates.

Where to buy lenses for Almera N16: verified stores and prices

When purchasing lenses, it is important to avoid dubious sellers. Here are verified sites with a product guarantee:

• 🛒 Exist.ru — original lenses and analogues from Hella, Bosch. Delivery within Russia 3–5 days.
• 🛒 Autodoc.ru - wide selection of budget options (Depo, TYC). There are often discounts of up to 30%.
• 🛒 Emex.ru — specializes in Japanese spare parts. Rare items for Asian versions can be found here Almera N16.
• 🛒 Avito/Yula — used original lenses starting at RUB 3,000. Risk of running into broken copies.

Average prices for lenses for Almera N16 (for 2026):

• Original (Stanley Electric): 8,000–14,000 RUR per piece.
• Analogues (Depo, TYC): 3 500–7 000 ₽.
• Tuning lenses (bi-xenon, LED): RUB 12,000–25,000 per set.

⚠️ Attention: When purchasing used lenses, check the integrity mirror coating And mounting lugs. Damaged elements will cause the light to focus incorrectly.

FAQ: Frequently asked questions about Nissan Almera N16 lenses

Is it possible to install lenses from Almera N16 on Almera Classic (B10)?

No, these models have different headlight shapes and seats. Lenses from N16 physically not suitable for Almera Classic (aka Nissan Pulsar in some countries).

Which lamps are better to install in new lenses - halogen, xenon or LED?

Depends on lens type:

• For standard lenses halogen lamps are optimal H7 power 55W (for example, Osram Night Breaker).
• For projector lenses suitable xenon D2S or LED with base H7/H4.

LED requires lenses with a heatsink, otherwise it overheats.

How to adjust the light after replacing lenses?

The adjustment is carried out at a special stand (service cost ~1,000 ₽). If you don’t have a stand, you can roughly adjust the light yourself:

1. Place the machine on a level area 5 meters from the wall.
2. Apply markings on the wall with chalk according to the diagram (the border of the light should be 5 cm below the height of the headlights).
3. Adjust the adjustment screws on the headlight until the light spot matches the markings.

What to do if condensation appears after replacing lenses?

Condensation is a sign of depressurization. Proceed like this:

1. Remove the headlight glass and dry the unit with a hairdryer (temperature up to 50°C).
2. Check the integrity of the rubber seal.
3. Apply new sealant (ABRO WS-904 or Permatex 81730) and assemble the headlight.

If condensation appears again, look for cracks in the headlight housing.

Is it possible to install adaptive light on Almera N16?

Technically possible, but economically impractical. For adaptive light you need:

• Special servo-motorized lenses (e.g. Valeo),
• Control unit,
• Body level sensors.

The cost of such tuning exceeds 50,000 ₽, which is comparable to the price of a used one Almera in good condition.