Nissan Qashqai J10 The first generation (2007–2013) remains a popular crossover on the secondary market, but as owners age, they increasingly have questions about replacing lamps. The original light sources dim, burn out, or are simply not bright enough. In this article we will analyze all types of lamps in Qashqai J10 — from low beam to dimensions, we will select the best analogues and show you how to replace them without mistakes.

Feature J10 — combined optics with halogen lamps in basic versions and xenon in top trim levels. At the same time, even in cars with xenon, halogen lamps often remain in the turn signals or dimensions. We have collected current data on bases, power and manufacturers, and also added tips on choosing LED alternatives (where permitted by traffic regulations).

Types of lamps in Nissan Qashqai J10: complete table by position

B Qashqai J10 Up to 15 different lamps are used - from the head light to the license plate light. Below is a table with original sockets and power for all positions. Please note: in cars with xenon (D2S) halogen low beam lamps are missing, but other positions are identical.

Position Base type Power, W Notes
Low beam (halogen) H7 55 In xenon versions - lamp D2S (35 W)
High beam H1 55 Separate lamp in the headlight
Front marker/parking light W5W (T10) 5 Often used as DRL in European versions
Front turn signal PY21W 21 Orange flask, in some versions - WY5W
Fog lights (PTF) H11 55 Not installed on all trim levels

The following lamps are used for the rear lights: P21/5W (stop/clearance), PY21W (turn signal), W16W (reverse) and W5W (number illumination). In the salon - C5W (plafond) and W5W (glove compartment light).

⚠️ Attention: In cars with xenon (D2S) replacement of lamps is required mandatory light settings at a service station - even a slight shift of the reflector leads to dazzling of oncoming drivers.

Which lamps are better for Qashqai J10: halogen vs LED vs xenon

The choice of lamp type depends on position and legal restrictions. Let's look at each option:

  • 🔦 Halogen: Standard selection for low/high beam (H7/H1). Top brands - Osram Night Breaker, Philips X-treme Vision (+30% brightness). Service life ~500–800 hours.
  • 💡 LED: Allowed only in dimensions (W5W), turn signals (PY21W) and salon. For the head light - prohibited by traffic rules of the Russian Federation (fine 500 rubles under Article 12.5 of the Administrative Code). The exception is certified LED modules (for example, Osram LEDriving HL), but their installation requires inclusion in the PTS.
  • ⚡ Xenon: Installed only in standard headlights with lenses (D2S). It is prohibited to install xenon in halogen headlights - it blinds oncoming traffic and is punishable by deprivation of your license for 6-12 months.

For fog lights (H11) LED lamps are allowed if they have a certificate ECE R19. Popular models: Philips Ultinon Essence (6000K) or Osram LEDriving FOG. The main thing is to check compatibility with the on-board computer Qashqai J10, since cheap LEDs can cause an error CAN-bus.

📊 Which lamps do you prefer in the Qashqai J10?
  • Halogen (original)
  • LED (where allowed)
  • Xenon (standard)
  • Economical (long service life)

Step-by-step replacement of H7 low beam lamps in Qashqai J10

Replacing the low beam lamp (H7) in Qashqai J10 takes 15–20 minutes. You will need: a new lamp, gloves (to avoid leaving greasy marks on the bulb) and a flat-head screwdriver. Algorithm:

  1. Open the hood and disconnect the negative terminal of the battery (to avoid short circuit).
  2. Remove the rubber boot from the back of the headlight unit by pulling it towards you.
  3. Disconnect the power supply by pressing the latch.
  4. Remove the spring clip from the hooks by moving it to the side.
  5. Remove the old lamp and install a new one, without touching the flask with your hands.

⚠️ Attention: If the lamp does not light after replacement, check the fuse F37 (10A) in the mounting block. He is responsible for the right headlight, F27 - for the left. Also inspect the connector for oxidation - in Qashqai J10 this is a common problem.

☑️ Preparing to replace H7 lamps

Done: 0 / 4

For high beam lamps (H1) the process is similar, but the latch is located differently - it needs to be moved up, not to the side. In xenon versions, replacement D2S requires dismantling the bumper and adjusting the light on the stand.

Mistakes when replacing lamps and how to avoid them

Even experienced owners Qashqai J10 make mistakes that lead to lamp burnouts or electrical problems. Let's look at the top 5 misses:

  • 🧤 Touching the flask with bare hands: Fatty traces lead to local overheating and shorten the life of the lamp. Use gloves or wipe the flask with alcohol.
  • 🔌 Incorrect connection: B Qashqai J10 polarity is important for lamps PY21W (turn signals). If you confuse “+” and “–”, the lamp will not blink or will burn out.
  • 🔧 Ignoring the anther: Installing a lamp without a rubber boot leads to moisture getting into the headlight and clouding the reflector.
  • 💡 Buying cheap LEDs: Lamps without stabilization driver cause an error CAN-bus (flashing lamp on the panel). The solution is to install 6 ohm resistors.
  • 🔦 Failure to comply with adjustment angles: After replacement H7 or H1 check the light beam on the wall (distance to the screen - 5 m, height of the center of the headlight - 0.6 m). A deviation of more than 1% leads to blindness.

What happens if you don't replace a burnt out brake light bulb?

B Qashqai J10 when the lamp burns out P21/5W (stop/dimension) The on-board computer may not show an error, but this creates an emergency situation. In the dark, the car is difficult to see from behind, and when braking, drivers behind do not receive a signal. In Europe, a fine for this is up to 100 €.

The best analogues of original lamps for Qashqai J10

Original lamps Nissan (production Koito or Stanley) are expensive, but do not always justify the price. We tested 10 brands and ranked the best analogues by position:

Position (base) Best budget option Premium Selection For long service
Low beam (H7) Bosch Pure Light (500 rub.) Osram Night Breaker Laser (1500 rub.) Philips LongLife EcoVision (1000 rub.)
High beam (H1) Narva Standard (300 rub.) Philips RacingVision (+150% light, 1400 rub.) Osram Ultra Life (2000 hours, 900 rub.)
PTF (H11) MTF Light Argentum (400 rub.) Osram LEDriving FOG (LED, 3500 rub.) Philips X-treme Vision (+130% light, 1200 rub.)

For dimensions and turn signals (W5W/PY21W) we recommend LED lamps Philips WhiteVision (white light) or Osram Cool Blue (blue tint). They consume 5 times less energy and last up to 10,000 hours.

💡

Before buying lamps, check them for fakes! Original Osram And Philips have a hologram on the packaging and a serial number, which can be checked on the manufacturer’s website.

Adjusting headlights after replacing bulbs

Replacing lamps in Qashqai J10 often requires adjustment of the light beam. The service charges 500–1000 rubles for this, but you can do it yourself. You will need a flat wall, a tape measure and chalk (or tape). Instructions:

  1. Place the machine on a level area 5 meters from the wall. Check the tire pressure (should be the same).
  2. Mark the wall:
    • A vertical line down the center of the machine.
    • Horizontal line at the height of the centers of the headlights (measure with a tape measure).
  • Turn on the low beam. The upper limit of the light spot should be 5 cm below the horizontal line.
  • Adjust the screws on the headlight (they are located on the top and side, under the plastic plugs).

    • ⚠️ Attention: In cars with xenon (D2S) adjustment is carried out only at a service station using special equipment! Self-tuning will lead to disqualification from technical inspection.

    💡

    If, after replacing the lamps, the light “looks” up or to the side, this not only blinds oncoming drivers, but also reduces your visibility of the road. Correct adjustment increases the lighting range by 20–30 meters.

    Frequent problems with lighting in Qashqai J10 and their solutions

    Owners Qashqai J10 often encounter typical lighting system malfunctions. Here are the most common ones and how to fix them:

    • 🚨 The low beam lamp is flashing: The reason is poor contact in the block or a burnt-out filament. Check the connector for oxidation (clean WD-40) or replace the lamp.
    • 💥 Lamps burn out every 2–3 months: The culprit is power surges in the on-board network. Check the generator (normal is 13.8–14.4V) and replace the relay R11 (responsible for light).
    • 🌫️ Headlights are dim: B Qashqai J10 The plastic of the headlights turns yellow over time. Solution - polishing with paste 3M or varnish coating Delta Kits. An alternative is replacing the headlights (original 26010-JM00A costs ~15,000 rubles).
    • 🔋 Dimensions do not work: Check the fuse F17 (7.5A) and relay K9. Often the problem is in the steering column switch - the contacts oxidize.

    If, after replacing the lamps with LEDs in the interior or dimensions, an error appears on the panel (Check Bulb), install kan emulators (For example, Resistor LED Fix for Qashqai J10). They deceive the on-board computer by simulating the load of a halogen lamp.

    FAQ: Frequently asked questions about lamps in Nissan Qashqai J10

    Is it possible to install LED lamps in low beam? Qashqai J10?

    No, it's prohibited by Russian traffic rules (clause 3.6 List of faults). Fine - 500 rubles, and in case of repeated violation - deprivation of rights. Exception: certified LED modules with changes to the title (legalization cost - from 20,000 rubles).

    What kind of lamps are in PTF? Qashqai J10 give the whitest light?

    For maximum white light (5000–6000K) in fog lights (H11) will fit:

    • Philips WhiteVision (halogen, 4300K)
    • Osram Cool Blue Intense (halogen, 5000K)
    • Morimoto XB LED (LED, 6000K, needs improvement)

    Why after replacing the lamp H7 Is the light dim?

    Possible reasons:

    1. Poor contact in the block (clean the terminals).
    2. A cheap lamp with low power (check the packaging - it should be 55W).
    3. The reflector in the headlight is cloudy (polishing or replacement is required).

    Which fuse is responsible for the right headlight in Qashqai J10?

    The fuse is responsible for the right headlight F37 (10A) in the mounting block (located under the steering wheel, the cover is removed by turning three latches). For the left - F27 (10A). Also check the relay K9 (low beam control).

    Is it possible to install xenon in halogen headlights? Qashqai J10?

    No! This prohibited for two reasons:

    1. Legal: Fine 3000 rubles. + confiscation of equipment (Article 12.5 of the Administrative Code).
    2. Technical: Halogen headlights are not designed for xenon - the light scatters and blinds oncoming drivers.

    An alternative is to replace the entire headlamp with a xenon one (for example, 26010-4M21A with lens).