Front right fender of <em>Nissan Almera N16</em>: how to select and replace without errors

Why does the wing need to be replaced and how to determine it

Front right fender Nissan Almera N16 - one of the most vulnerable body parts. Even a minor accident, parking against a curb, or corrosion can lead to the need to replace it. Unlike the bumper, which is often restored, the wing is almost always replaced entirely: its geometry directly affects the operation of the headlights, doors and even the suspension.

How do you know if a wing needs replacement? Main features: visible dents more than 3–5 cm deep, cracks in the metal (especially at fasteners), rust eaten through, or deformation due to which the door no longer closes tightly. If after the impact the gap between the wing and the hood changes, this is also a signal. In 80% of cases, restoration is more expensive than installing a new part.

It is worth considering that on Almera N16 (2000–2006) wings are not interchangeable with other generations. Even externally similar models, for example, Nissan Sunny or Primera P12, have a different shape of fastenings and cutouts for headlights. Therefore, when purchasing, be sure to check the catalog number.

Original vs analogues: what to choose for replacement

Original wing from Nissan (article 62100-4M000 or 62100-4M001 for versions with a turn signal in the wing) guarantees an ideal fit and durability, but its price starts from 12,000 rubles. An alternative is certified analogues from trusted brands, which can save up to 40% of your budget.

Among the popular manufacturers:

• 🔹 Febi (Germany) - high quality metal, but requires adjustment to the mounts to the bumper.
• 🔹 AMC (Taiwan) - a budget option (from 6,500 rubles), but often requires modification of welding seams.
• 🔹 Hans Pries (Germany) - premium segment, almost as good as the original (price ~10,000 rubles).
• 🔹 Korean unbranded - cheaper than 5,000 rubles, but the risk of corrosion after 2-3 years is 30% higher.

Critical point: cheap analogues often lack a technological hole for attaching a turn signal (if it is built into the wing). You will have to cut this out yourself, which requires precision and tools.

Step-by-step instructions for replacing a wing

Replacing the front right fender with Almera N16 takes 3–5 hours if you have the tools. The main thing is to take your time during the dismantling stage, so as not to damage adjacent parts. Here is the sequence of actions:

1. Removing the bumper and headlights. Unscrew the bumper mounting bolts (4 pieces on the bottom and 2 on the sides), disconnect the clips. The headlight is held on by 3 bolts and one plastic retainer.
2. Disconnecting the turn signal. If it is built into the wing, unplug the power connector and remove the lamp.
3. Removing the old wing. It is secured with 6 bolts (4 at the bottom and 2 under the hood) + welded points in the area of the rack. Carefully cut them off with a grinder.
4. Installation of a new wing. Try on the part, tack it by welding at 2-3 points, then drill holes for the bolts.
5. Assembly. Install headlights, bumper, connect electrical. Check the gaps with the hood and door.

⚠️ Attention: If the wing was attached with factory rivets (rather than bolts), a special puller will be required. Do not try to drill them out with a drill - you risk damaging the spar.

- Matching holes for headlights and turn signals

- Gaps with the hood (should be 3–5 mm)

- Quality of welds on the new wing

- All mounting bolts included -->

Painting and anti-corrosion treatment: nuances

Even the original fender requires painting after installation. On Almera N16 two primary colors are used: KH3 (Dark gray metallic) And BQ5 (Blue). It is important to choose paint not only by code, but also by year of manufacture - the shades could differ.

Painting stages:

1. Degreasing. Use Anti-Silicone or white spirit.
2. Primer. Apply 2 coats of epoxy primer and dry for 15 minutes.
3. Painting. 3 layers of base paint + 2 layers of varnish. Interlayer drying - 10 minutes.
4. Polishing. After 24 hours, polish the matte surface with paste 3M 09374.

For anti-corrosion treatment of the inner surface of the wing, use Dinitrol 4010 or Tectyl 506. Apply the compound with a brush, paying attention to welds and joints with the spar.

Price comparison and where to buy with a guarantee

Prices for front right fender for Nissan Almera N16 vary by region and retailer. Below is a table with current offers (as of June 2026):

Manufacturer	Price (RUB)	Warranty	Where to buy
Nissan (original)	12 000–15 000	12 months	Official dealers, Exist.ru
Febi (Germany)	8 500–9 500	24 months	Autodoc, Kia-Motors
AMC (Taiwan)	6 500–7 500	6 months	Emex, Avtoall
Korean equivalent	4 500–5 500	No warranty	AliExpress, local showdown

When purchasing, check:

• 📌 Availability certificate of conformity (for analogues).
• 📌 Condition of the packaging - dents or traces of corrosion on the parts are unacceptable.
• 📌 Contents: the box must contain mounting bolts and plugs (if provided).

⚠️ Attention: At disassembly sites they often sell wings with weld points already cut off. Such parts are more difficult to install correctly - you will need a spot welder.

How to recognize a fake original Nissan wing?

Fake wings often have:

- Uneven stamping (visible in the light at an angle).

-No Nissan logo on the inside.

- Fastening bolts with non-standard threads (for example, M6 instead of M8).

- Metal thickness less than 0.8 mm (checked with a caliper).

Common replacement mistakes and how to avoid them

Even experienced craftsmen make mistakes when replacing a wing. Here are the most common:

1. Gap mismatch. If the new wing rests against the door, check the fastening of the door hinges - they could move upon impact.
2. Ignoring anti-corrosion treatment. Without protection, welds will rust in 1–2 years, especially in Russian winter conditions.
3. Saving on primer. Cheap primer peels off along with the paint after 6–12 months.
4. Incorrect welding. Spot welding should be done in increments of 3-4 cm, and not with a continuous seam - this weakens the metal.

To avoid problems:

• 🔧 Use torque wrench for tightening bolts (torque 8–10 Nm).
• 🔧 Check the body geometry to And after replacement using a laser level.
• 🔧 If the wing is welded, use argon arc welding — it gives minimal deformation.

FAQ: Answers to popular questions

Is it possible to install a wing from Nissan Sunny on Almera N16?

No, despite the external similarity, the mounts and the shape of the cutouts for the headlights are different. wing from Sunny will hang around the bumper area and will require serious modifications.

How much does it cost to replace a wing at a service center?

Cost of work in car services in Moscow and the regions:

• Dismantling/installation: RUB 3,000–5,000.
• Painting: 4,000–7,000 rub. (depending on color).
• Welding: 1,500–2,500 rub. (if required).

Total: from 8,500 to 14,500 rubles. excluding the cost of the part.

What tool do you need to replace it yourself?

Minimum set:

• Grinder with cutting wheel (for welding points).
• Set of sockets and ratchet wrench.
• Welding machine (if the wing is welded).
• Jack and wheel supports.
• Degreaser and anti-corrosion compound.

What should I do if the door does not close after replacement?

Causes and solutions:

1. Wing warp. Loosen the mounting bolts and adjust the position.
2. Deformation of the stand. The stand will need straightening or replacement.
3. Problems with door hinges. Check their fastening and replace if necessary.

Is it possible to drive with a damaged fender?

Technically yes, but:

• 🚗 Legally this is a violation (Article 12.5 of the Administrative Code - a fine of 500 rubles), if the sharp edges of the metal can injure pedestrians.
• 🚗 Security: a deformed wing can block the door from opening in an emergency.
• 🚗 Corrosion: Even a small crack will grow into a through hole in 2–3 years.