Crossover operation Nissan Terrano 2018 requires careful attention to the safety system, especially to the brake unit. The front wheels take up to 70% of the load during sudden deceleration, so the condition brake pads directly affects your safety and the behavior of the car on the road. Ignoring signs of wear can lead to costly caliper and rotor repairs.
Owners Nissan Terrano Often faced with a dilemma: choose original spare parts or look for high-quality analogues? The auto parts market offers a huge range, but not all of them are suitable for your crossover. Correct selection components is the key to durability and effective braking in all weather conditions.
Design features of the Terrano 2018 brake system
Your vehicle's braking system is designed with its off-road capability and weight in mind. Front calipers on the model Nissan Terrano equipped piston a certain diameter, which requires pads with a specific friction lining area. This ensures the necessary coefficient of friction and heat dissipation during intense off-road or city driving.
A design feature is the presence of a built-in wear sensor on some trim levels. If you are the owner of a version with this function, you need to take this nuance into account when choosing a replacement. Stock pads may not have a connector for the sensor, which will result in a persistent warning on the dashboard even after new parts are installed.
It is important to understand that disc brakes front axle are paired with ventilation discs. This helps avoid overheating during long descents. However, the efficiency of the system decreases if the friction material of the pads does not meet the manufacturer's requirements for temperature and pressure.
Original spare parts and their catalog numbers
Purchasing an original is the safest way to ensure compliance with all factory standards. For Nissan Terrano 2018 model year, the main article number of the front pads is D5600-1HA0A. This kit includes friction linings, springs and the necessary clips for installation.
Sometimes you can find alternative numbers in catalogs, such as D5600-1HC0A or D5600-1HJ0A. They may differ in the material of the lining or the presence of additional damping elements. Be sure to check your vehicle's VIN before purchasing, as parts may vary depending on engine type and year of manufacture.
⚠️ Attention: Genuine Nissan pads are often supplied without a metal clamp spring, which must be replaced from the old parts. Check the contents before installation to avoid vibrations.
Benefits of use original products consist in the predictability of the behavior of the brakes and the absence of dust on the discs. However, the price of such spare parts can be significantly higher than analogues, which forces many car owners to consider alternative options.
Top analogue brands for replacement
If you are looking for a more budget-friendly solution, the market offers many proven brands. Leaders in the segment of high-quality analogues for crossovers Nissan are companies TRW, Brembo And Friktions. These manufacturers often deliver products to assembly lines, so the quality of their parts is not inferior to the original.
When choosing a brand, pay attention to the material of the friction mixture. For Nissan Terrano Ceramic or semi-metallic compounds are best. They provide stable braking at high temperatures and wear out the brake disc less compared to cheap organic analogues.
- 🛑 TRW - excellent balance of price and quality, often has an improved composition to reduce noise.
- 🛑 Brembo — a premium option with high heat resistance, ideal for active driving.
- 🛑 Nissin - a Japanese brand specializing specifically in brake systems, often regarded as the original.
You shouldn't save money on cheap Chinese brands without a well-known reputation. In the conditions of our roads and climate poor quality pads can quickly collapse, creating an emergency situation. Always check for quality certificates and packaging before purchasing.
- Original
- High-quality analogues
- Budget analogues
- I don't know
Table of articles of popular manufacturers
To simplify the search for spare parts, we have collected data on the most popular articles suitable for Nissan Terrano 2018. Use this table as a reference when ordering parts from online stores or warehouses.
| Manufacturer | Article | Material type | Features |
|---|---|---|---|
| Nissan (Original) | D5600-1HA0A | Organic | Basic equipment |
| TRW | GDB1956 | Ceramics | Low disc wear |
| Brembo | P 63 072 | Semi-metal | High efficiency |
| Friktions | FR-5600 | Organic | Optimal price |
| Nipparts | N9021015 | Organic | Availability on the market |
Please note that article numbers may change depending on the region of supply and catalog updates. Always double-check the VIN code for your specific vehicle before paying for your order.
What to do if the article does not match?
If the selected part number is not suitable, check the year of manufacture and engine size. Sometimes for versions with a 1.6 l and 2.0 l engine, the brake components may have slight differences. Please also note that some markets (eg Europe or Asia) may have different part numbers.
Wear symptoms and diagnosis
Checking your brakes regularly should become a habit. The first sign that pads are worn out, is the appearance of a characteristic squealing or grinding sound when you press the brake pedal. This is a signal from a metal indicator plate that touches the disc when the minimum thickness of the pad is reached.
Another warning sign is increased pedal travel or the need to exert more force to stop the vehicle. If you feel vibration in the steering wheel when braking, this may indicate not only worn pads, but also deformation of the brake discs, which requires a comprehensive check.
- 🔊 A grinding or metallic sound means critical wear and requires immediate replacement.
- 🔊 Vibration of the steering wheel or body - deformation of the discs or uneven wear of the pads.
- 🔊 The car pulls to the side when braking - jamming of the caliper or uneven wear.
Visual inspection through the holes in the wheel rim allows you to assess the residual thickness of the friction layer. If it is less than 2-3 mm, operating the car becomes dangerous. Less than 2 mm is the critical limit at which the torch can catch the metal base of the pad and damage the disc.
Step-by-step replacement instructions
Replacing front brake pads with Nissan Terrano - a procedure that can be performed independently if you have a basic set of tools. You will need a jack, stands for the car, wrenches 14 and 17, as well as a tool for pressing in the caliper piston.
The process begins by lifting the car and removing the wheel. Loosen the caliper guides, which are usually secured by two bolts from the bottom. After this, carefully remove the caliper, hanging it on a wire so as not to damage the brake hose. The old pads are removed from the bracket, which remains on the hub.
☑️ Preparing to replace pads
Before installing new parts, you must thoroughly clean the caliper bracket from dirt and rust. Apply special lubricant to the guides and the contact points of the pads with metal elements, excluding the working surface of the friction material. This will prevent squeaks and jamming.
An important step is to press the caliper piston into the body. To do this, use a special tool or clamp. Make sure that the level of brake fluid in the reservoir does not exceed the maximum mark, otherwise it may overflow when the piston expands.
⚠️ Attention: When replacing pads, be sure to check the condition of the caliper guides. If they are worn or seized, new pads will quickly wear unevenly and may overheat.
After assembly, be sure to press the brake pedal all the way down several times to press the pads against the disc and restore the operating clearance. Only after this can the car be lowered to the ground and a test drive carried out.
Proper cleaning of the bracket and lubrication of the guides will extend the life of new pads by 2 times and prevent vibrations during braking.
Nuances of operation and care
After installing new brake pads a running-in period is required, which lasts approximately 200-300 kilometers. During this time, avoid sudden braking and high speeds to allow the friction material to adapt to the disc surface. This will ensure maximum braking performance in the future.
Regular cleaning of the wheel arches and checking the brake fluid level are also important for long service life of the system. Dirt and water can get into the caliper guides, causing them to corrode and seize. Use special brake cleaners to remove oil stains and dust.
If you plan to use the vehicle off-road or tow a trailer, consider installing harder ceramic pads. They better withstand the high loads and temperatures typical of harsh operating conditions. Nissan Terrano.
- 🛠️ Wash your brakes every time you wash your car to remove abrasive dust.
- 🛠️ Check the condition of the rubber seals on the calipers every time you replace the pads.
- 🛠️ Change brake fluid once every 2 years, as it is hygroscopic and loses its properties.
For better pad fit, perform a series of smooth braking from 60 km/h to 20 km/h, pausing for 30 seconds to cool down. Repeat 5-7 times.
⚠️ Attention: Do not use the brakes to hold the vehicle on an incline instead of the handbrake. This leads to overheating of the pads and a decrease in their effectiveness during emergency braking.
Frequently Asked Questions
How often should you replace the front brake pads on your 2018 Nissan Terrano?
Service life depends on driving style and operating conditions. On average, original pads last from 30,000 to 50,000 km. High-quality analogues can travel up to 40,000 km. Always refer to the actual thickness of the pad, not just the mileage.
Is it possible to change only the front pads without changing the rear ones?
Yes, the front and rear brake systems operate independently. Front pads wear out faster due to greater braking load. However, when replacing the front ones, it is recommended to check the condition of the rear ones, as they may already be on the verge of wear.
Why did a squeak appear after replacing the pads?
Creaking can occur due to lack of lubrication on metal parts, poor-quality pad material, or insufficient running-in. It could also be due to dirt or rust on the caliper bracket. Check that the installation is correct and that all clips are present.
Do I need to grind brake discs when replacing pads?
Grooving is necessary only if there are deep grooves on the discs, wear more than 1-1.5 mm or runout. If the discs are in good condition, you can simply clean them. Frequent sharpening reduces the life of the disc, so do it only when necessary.
What should the brake fluid level be after replacing the pads?
The level should be between the MIN and MAX marks. After pushing in the pistons, the level may rise slightly, but should not exceed MAX. If the level is too low before replacement, it may indicate a leak or severely worn pads.