Clips for Nissan Qashqai J11: which ones to choose and how to install correctly

Clips are those small but critical details that determine how firmly the bumper trim, fender liners or interior elements of your vehicle will hold. Nissan Qashqai J11. Over the years, plastic clips break, get lost, or simply stop serving their purpose, leaving owners scrambling for replacements. But how not to make a mistake with your choice if there are hundreds of options on the market - from original ones to cheap Chinese analogues?

In this article we will look at which clips are suitable for Qashqai J11 (2014–2021 production), where to look for them, how to properly remove old fasteners so as not to break the cladding, and what mistakes are most often made during installation. We’ll also compare prices, materials and give you a checklist for replacement yourself.

What clips are used in the Nissan Qashqai J11: types and location

B Qashqai J11 clips are used for fastening:

• 🔹 Bumper (upper and lower clamps to the fender, central to the subframe)
• 🔹 Podkrylkov (clips for wheel arches and sills)
• 🔹 Radiator grille trims (small plastic latches)
• 🔹 Salon (fastening door panels, center console, glove compartment)

Bumper clips are the most vulnerable - they often break when dismantled to repair or replace headlights. In the cabin, the fasteners most often affected are the sill trim and the lower part of the dashboard. It is important to understand that different zones are used different types of clips:

• 🔄 Spring metal — for heavy elements (bumper, subframe)
• 🔄 Plastic Christmas trees — for light panels (cladding, fender liners)
• 🔄 Clips with rubber seal — for sealed connections (wheel arches)

Original clips from Nissan are marked with catalog numbers, for example: 90467-4M000 (bumper clip), 90467-1M000 (fender liner clamp). Analogues from Febi, Hella or Dorman often have the same shape but differ in material.

Original vs analogues: which is better for the Qashqai J11?

The main question when choosing is whether to choose original clips or analogues. The original is guaranteed to fit and last longer, but its price can be steep. For example, one bumper clip from Nissan worth it 200–400 rubles, whereas the analogue from Febi — 50–150 rubles.

Advantages of original clips:

• ✅ Exact fit and size
• ✅ Resistance to temperature changes (does not tan in the cold)
• ✅ Manufacturer's warranty

Advantages of analogues:

• ✅ Price is 2–4 times lower
• ✅ Quick availability (available in most stores)
• ✅ Some brands (for example, Hella) are not inferior to the original in quality

Clip type	Original (Nissan)	Analogue (Febi/Hella)	Price per piece, ₽
Bumper clip (upper)	90467-4M000	Febi 15610	350 / 80
Fender liner clip	90467-1M000	Hella 8XH 355 409-121	200 / 60
Grille trim clip	90467-5M000	Dorman 711-100	180 / 45

Critical point: the clips for the front and rear bumpers in the Qashqai J11 are different in shape! If you put the rear clip in front, it will not withstand the load when moving and will quickly break.

Where to buy clips for Qashqai J11: trusted suppliers

You can buy clips in several places, but not all of them are reliable. Let's look at the pros and cons of each option:

1. Official Nissan dealers

• ✔ Guarantee of original parts
• ✔ Specialist consultation
• ❌ Prices are 30–50% higher than the market
• ❌ Long wait (if out of stock)

2. Online spare parts stores (Exist.ru, Autodoc, Kolesa-darom.ru)

• ✔ Wide range of analogues
• ✔ Fast delivery (1–3 days)
• ✔ Reviews from other buyers
• ❌ Risk of running into a fake (check the seller!)

3. Markets and auto shops

• ✔ You can touch and compare before purchasing
• ✔ Low prices for analogues
• ❌ They often sell “universal” clips that don’t fit
• ❌ No guarantee

4. AliExpress and other Chinese sites

• ✔ Lowest prices (from 10 ₽ per piece)
• ❌ The quality of plastic is often poor (they break at the first frost)
• ❌ Long delivery (2–4 weeks)

⚠️ Attention: When purchasing on AliExpress pay attention to the material - cheap clips made from recycled plastic become fragile after just a year.

Step-by-step instructions: how to remove and install clips on Qashqai J11

Replacing clips seems simple, but there are nuances. If you do it incorrectly, you can break the cladding or the latch itself. Let's look at the process using an example replacing front bumper clips.

Required tools:

• 🔧 Plastic puller or flat screwdriver
• 🔧 Torx T20 wrench (for some fasteners)
• 🔧 Flashlight (to see clips in hard-to-reach places)
• 🔧 Silicone grease (to facilitate installation)

Step 1. Removing the old clip

1. Loosen the bumper mounting bolts (usually 2-4 pieces from the bottom).
2. Carefully pry up the lining with a plastic puller where the clip is attached.
3. Pull the bumper perpendicular body - this way the clip will come out of the groove with minimal effort.
4. If the clip breaks and remains in the hole, use pliers to remove it.

Step 2. Install a new clip

1. Clean the hole from dirt and rust.
2. Insert the clip into the groove on the bumper, then press until it clicks.
3. Make sure that the latch sits evenly - distortions will lead to rapid wear.
4. Tighten the bumper mounting bolts (torque - 8–10 Nm).

Typical mistakes:

• ❌ Using a metal screwdriver — scratches the plastic and breaks the clips.
• ❌ Tightening the bolts — leads to deformation of the bumper.
• ❌ Installing the clip at an angle - it will quickly fall out.

⚠️ Attention: If you hear a crunching sound when removing the bumper, stop immediately! Chances are you're pulling in the wrong direction and breaking the clip or mount.

Interior clips: features of replacement in Qashqai J11

Clips in the cabin Qashqai J11 are less loaded, but replacing them requires care - there is a lot of fragile plastic and wiring. The most common fasteners that break are:

• 🚗 Door sill trims (when cleaning or replacing mats)
• 🚗 Central console (when repairing a stove or radio)
• 🚗 Glove compartment (if you often open it with force)

Typically used for salons plastic herringbone clips (For example, 90467-7M000). Their peculiarity is that they are fixed due to the elasticity of the plastic, so when installing it is important:

1. Heat the clip with a hairdryer (if it’s cold outside) - this will make it more elastic.
2. Press strictly in the center, without distortion.
3. Check the reliability of fastening after installation (pull the panel towards you).

If the clip breaks and you don’t have a new one at hand, you can temporarily fix the panel 3M double sided tape or plastic ties. But this is a solution for 1-2 weeks - then a replacement will still be required.

What should I do if the clip breaks inside the panel?

If part of the clip remains in the groove, try carefully drilling it with a thin drill (1–2 mm) and pulling it out with wire. Do not use pliers - they will damage the plastic!

How to extend the life of clips: prevention and care

Clips are consumables, but their service life can be increased if you follow simple rules:

1. Correct dismantling

• 🔧 Always use plastic puller, not a screwdriver.
• 🔧 Remove panels at higher temperatures +10°C — plastic is fragile in the cold.
• 🔧 Do not pull the bumper or cladding with jerks - it is better to swing it from side to side.

2. Clip care

• 🧴 Treat the retainers once a year silicone grease (For example, WD-40 Specialist).
• 🧴 After washing, check if there is any water left in the grooves - it leads to corrosion of metal clips.

3. UV protection

• ☀️ Plastic clips lose their elasticity over time due to the sun. If the car is parked in an open parking lot, inspect the fasteners every 2 years.
• ☀️ Can be applied to clips to extend service life clear varnish for plastic.

4. Spare clips in the glove compartment

• 🚗 Always carry 2-3 spare bumper and fender liner clips with you. They take up little space, but can save you on the road.

Frequently asked questions about clips for Nissan Qashqai J11

Can I use clips from Qashqai J10 on J11?

No, most clips are not interchangeable. For example, bumper clips in J10 have a different diameter and shape of the retainer. An exception is some interior fasteners (for example, for sill trim), but it is also better to check them in the catalog.

How many clips are needed to completely replace the front bumper?

For front bumper Qashqai J11 required 8 clips: 4 upper (to the fenders) and 4 lower (to the subframe). Additionally, 2-4 Torx T20 screws may be needed for additional fixation.

What kind of glue can be used for temporary fastening if the clip is broken?

Suitable for temporary fixation adhesive sealant ABRO AB-11AB or double sided tape 3M VHB. But remember: this is a solution for 1-2 weeks, since the glue does not withstand vibrations and temperature changes.

What should I do if the clip rotates in the groove and does not lock?

This means that the groove in the body or bumper is worn out. Solutions:

1. Install a larger diameter clip (if dimensions allow).
2. Seal the groove with epoxy resin and drill a new hole.
3. Use a clip with a rubber gasket for better grip.

Where can I find the clip layout for the Qashqai J11?

The official diagram can be found:

• In the repair manual Nissan Qashqai J11 (section Body Repair Manual).
• On the website Nissan Consult (access to the database is required).
• In thematic groups on VKontakte or on the forum Club-Nissan.ru.