Fender liner clips for Nissan Almera G15: how to select and replace without mistakes

Protective fender liners on Nissan Almera G15 - an integral part of the body that prevents dirt, water and sand from entering the wheel arches. However, over time, fastening - fender liner clips - wear out, break or get lost, causing the protection to sag or even come off. Owners Almera G15 (especially after 5-7 years of operation) are often faced with the need to replace them, but do not always know which parts are suitable, where to buy them and how to install them correctly.

In this article we will look at all the nuances: from original articles and analogues to step-by-step instructions for replacement. You will learn why standard clips break, how to choose alternative options (including universal ones) and what tools you will need for the job. We will also reveal the secret of reliable fixation of fender liners without additional modifications, which will save you time and nerves.

Which clips are suitable for Nissan Almera G15: originals and analogues

On Almera G15 (2012–2018) two types of clips are used: plastic pistons for attaching fender liners to the arch and metal rivets (in some modifications). Original parts from Nissan have the following articles:

• 🔹 90510-4M000 - standard plastic clip (the most common)
• 🔹 90510-9M000 - reinforced version (less common, but more reliable)
• 🔹 90510-5M000 — for attaching to the bumper (if the fender liner goes to it)

Original clips can be purchased from official dealers Nissan or in trusted online stores (for example, Exist.ru, Emex.ru). The price for one piece is from 80 to 150 rubles. However, many owners prefer analogues, which are cheaper and sometimes even stronger. Among the tested options:

• 🔹 Febi (article 27186) - German quality, true to size
• 🔹 Sidem (article 51010) - a budget analogue, but requires careful installation
• 🔹 Mitsubishi (article MR905105) - interchangeable with the original Nissan

If you are unsure about compatibility, please check cap diameter (should be 10–12 mm) and leg length (optimally 15–18 mm). Universal clips (for example, from 3M or Permatex) will also fit, but they will have to be cut to length.

⚠️ Attention: Do not buy clips with a metal core for Almera G15 - they can damage the plastic of the arch due to vibrations. The only exception is the rear fender liners on some modifications.

Why clips break: the main reasons and how to avoid it

Clips on Nissan Almera G15 fail for several reasons, and most of them are related to improper use or installation:

• 🔧 Frequent removal of fender liners (for example, for washing or repairs). Plastic loses its elasticity over time.
• 🌡️ Temperature changes. In cold weather, the clips become brittle, and in hot weather, they become too soft.
• 🚗 Vibrations and shocks. Driving on bad roads or accidentally hitting the wheel arch liners on curbs.
• ⚙️ Poor quality installation. If the clip is inserted crookedly or with excessive force, it will crack.

To extend the life of your fasteners, follow these simple rules:

• 🔹 Before installation, lubricate the clip leg silicone grease (For example, WD-40 Specialist).
• 🔹 Do not pull the fender liner when removing - first carefully pry the clips with a screwdriver.
• 🔹 In cold weather, before dismantling, warm up the clips with a hairdryer (but do not overheat!).

If clips break too often, consider additional fixation wheel arch liners using nylon zip ties or 3M double sided tape. It's not aesthetically pleasing, but it's reliable.

Step-by-step instructions: how to replace fender liner clips yourself

Replacing clips with Nissan Almera G15 does not require special skills, but will require patience and the right tools. Here's what you'll need:

• 🔧 Flathead screwdriver (or special clip remover)
• 🔧 Phillips screwdriver (for removing the fender liner, if required)
• 🔧 New clips (the number depends on the condition of the old ones)
• 🔧 Flashlight (for lighting the arch)

If the fender liner is not damaged, it does not need to be completely removed. It is enough to bend the edge and replace the broken clips. If complete dismantling is required, follow the instructions:

Step 1. Bend back the edge of the fender liner and locate the broken clip. Gently pry it up with a screwdriver, pressing on the center so that the leg comes out of the hole.

Step 2. Insert the new clip into the arch hole, then press until it clicks. Make sure it sits straight and is not askew.

Step 3. Secure the fender liner by pressing on the attachment point. If the clip does not hold, check to see if any debris has gotten underneath it.

⚠️ Attention: Do not use a hammer to drive in clips! This will lead to cracks in the plastic of the arch. If the clip does not fit, check its size or clean the hole from dirt.

Comparison of clips: original vs analogues vs universal solutions

The choice between original clips, analogues and universal options depends on budget, availability and reliability requirements. Below is a comparison table:

Clip type	Cost (per piece)	Pros	Cons	Where to buy
Original (Nissan)	100–150 ₽	Perfect fit, long service life	Expensive, sometimes long delivery	Official dealers, Exist.ru
Analogues (Febi, Sidem)	50–90 ₽	Cheaper than the original, good quality	May vary in hardness	Auto stores, Wildberries
Universal (3M, Permatex)	30–70 ₽	Cheap, always in stock	Requires trimming, less reliable	Any auto or hardware store
Metal rivets	200+ ₽	Maximum strength	May rust and difficult to dismantle	Specialty stores

For most owners Almera G15 optimal choice - analogues from Febi or Mitsubishi. They are cheaper than the original, but not inferior in quality. Universal clips should only be used as a last resort, as they often fall out during strong vibrations.

If you plan to remove your fender liners frequently (for example, for tuning or regular washing), consider quick release clips (for example, from Hella). They are more expensive, but allow you to remove the fender liners without the risk of breakage.

Common mistakes when replacing clips and how to avoid them

Even experienced car owners sometimes make mistakes when working with fender liner clips. Here are the most common ones and how to prevent them:

• 🔹 Using the wrong clips. For example, buying clips from Renault or Kia "by eye". Always check the article numbers or take the part with you to the store for fitting.
• 🔹 Use of excessive force. If the clip does not fit, do not press harder - check to see if debris has gotten under it or if it is warped.
• 🔹 Ignoring hole status. If the arch plastic is cracked or the hole is widened, the clip will not hold. In this case use repair bushings or sealant.
• 🔹 Replacing only broken clips. If one clip is broken, chances are the others are worn out too. It's better to replace everything at once.

Another common mistake is incorrect installation sequence. Start attaching the fender liner from top clips, then move on to the bottom ones. This will prevent sagging and ensure even tension.

What to do if the clip falls into the arch?

If the clip falls inside the arch, do not try to reach it with your hands - use a magnetic gripper or flexible tweezers. As a last resort, you can remove the fender liner completely and shake it out.

If after replacing the fender liner still comes off, check the condition of the plastic itself. Over time, it loses elasticity and may crack. In this case, only replacing the fender liner or repairing it with soldering iron and plastic patches.

Where to buy clips for Nissan Almera G15: verified stores and prices

Buy clips for Almera G15 Can be done both offline and online. Here are the tested options:

• 🏬 Official Nissan dealers. Plus - guaranteed quality, minus - high price and possible lack of stock.
• 🛒 Large auto stores (AutoSpetsCenter, Ixora, BBC). Usually there are analogues available from Febi or Sidem.
• 🌍 Online platforms:
  • 🔹 Exist.ru — originals and analogues, fast delivery.
  • 🔹 Emex.ru — large selection, often there are discounts.
  • 🔹 Wildberries or Ozon - convenient if you need to buy several pieces at once.
• 🔧 Showdown. You can find used clips in good condition for 20–50 RUR per piece.

Average prices for clips (for 2026):

• 🔹 Original (Nissan 90510-4M000) — 120–150 ₽.
• 🔹 Analogue (Febi 27186) — 60–80 ₽.
• 🔹Universal (3M) — 30–50 ₽.
• 🔹 Set of 10 pcs. — 500–800 ₽ (more profitable if you change all the clips).

When purchasing online, pay attention to reviews — sometimes you come across fakes that break during the first installation. If you buy it at a disassembly, check the elasticity of the plastic: it should not be hard or cracked.

⚠️ Attention: In some online stores, clips are sold under the wrong article numbers. Always check with the seller whether they are suitable for Almera G15 (body N17).

Alternative methods of attaching fender liners: when clips do not help

If the clips are constantly falling out or the plastic of the arch is damaged, you can consider alternative fastening methods. They are less aesthetically pleasing, but reliable:

• 🔹 Nylon zip ties. Pass them through the holes in the fender liner and arch, then tighten. The downside is that you will have to cut it when dismantling.
• 🔹 3M double sided tape. Suitable for temporary fixation. Apply to a cleaned surface.
• 🔹 Self-tapping screws with press washer. Use only as a last resort - you can damage the arch.
• 🔹 Rivets. If the plastic of the arch allows, you can install rivets (but this is an irreversible process).

For Almera G15 the most gentle option - combination of clips and ties. For example, you fix the upper fastening points with clips, and the lower ones with ties. This will prevent sagging when driving off-road.

If you decide to use self-tapping screws, take plastic dowels for soft fastening. Metal screws without dowels will loosen the holes over time.

FAQ: Frequently asked questions about fender liner clips for Nissan Almera G15

How many clips do you need to replace on one arch?

On Almera G15 usually installed 6–8 clips per wheel (depending on the configuration). It is recommended to buy a set of 10 pieces as parts may break during disassembly.

Is it possible to drive without fender liners?

Technically possible, but not advisable. Without fender liners, dirt and water get onto brake mechanisms, shock absorbers And bottom, accelerating corrosion. The noise in the cabin also increases.

How to remove the fender liner if all the clips are broken?

Carefully pry the edge of the fender liner with a flat-head screwdriver and pull it towards you. If the plastic doesn't give in, try warming it up with a hairdryer. As a last resort, you can drill out the broken clips or cut the fender liner at the attachment point (then glue it together).

Will clips from a Nissan Note or Micra fit?

No, the clips are from Note (K13) and Micra (K12) have a different diameter and length. Use only parts intended for Almera G15 (N17).

What to do if the clip has fallen into the arch and cannot be pulled out?

Use magnetic gripper or flexible tweezers. If the clip falls deeply, remove the fender liner completely and shake it out. As a last resort, you can leave it inside - it will not damage the mechanisms.