Hood for Nissan Bluebird Sylphy: how to choose, replace and care for it correctly

Nissan Bluebird Sylphy is a popular sedan that combines reliability, comfort and modern design. The hood of this car not only performs a protective function, but is also a key element of the exterior, affecting the aerodynamics and overall appearance of the car. However, over time, even the most durable hood may require replacement due to corrosion, mechanical damage or an accident.

In this article we will look at all the nuances associated with the hood. Nissan Bluebird Sylphy: from the selection of original and non-original parts to step-by-step instructions for dismantling/installation. We will pay special attention to typical problems (for example, squeaks when opening or distortions after an accident), and we will also give practical care tips that will extend the life of this important body element. If you are planning a renovation or just want to understand the topic, you will find answers to all your questions here.

Original hood vs analogs: what to choose for Nissan Bluebird Sylphy

When replacing the hood, owners Bluebird Sylphy are faced with a dilemma: to buy original part from Nissan (article 62501-4M000 for models 2012–2020) or opt for an analogue from third-party manufacturers. The original guarantees a perfect fit, factory paint and no problems with fastenings, but its price can reach 40–60 thousand rubles (depending on generation and region).

Alternative options are 30–50% cheaper, but it is important to consider several factors:

• 🔍 Metal quality: Cheap analogues are often thinner and rust faster. Check the sheet thickness (optimally 0.8–1 mm).
• 🎨 Adjustment for painting: some analogues require modification before painting (for example, puttying uneven areas).
• 🔧 Mount Compatibility: check whether the hinges and lock from the original are suitable. For example, hoods from DY Auto or Febi usually compatible, but Chinese no-name may require adjustment.

Among the proven analogues, the following stand out:

• 🏆 DY Auto (Japan) - best price/quality ratio, minimal modifications.
• 💰 Febi (Germany) - more expensive than Chinese ones, but with a guarantee for the metal.
• ⚠️ Unnamed Chinese hoods are a risky choice, often with defective geometry.

⚠️ Attention: When purchasing an analogue, be sure to check the article number with the VIN number of your Bluebird Sylphy. For example, hoods for a restyled model (2016+) may not fit the pre-restyled model (2012–2015) due to the changed shape of the radiator grille.

Prices for hoods for Nissan Bluebird Sylphy: comparison table

The cost of a hood depends on the generation of the car, the material and the region of purchase. Below is the current price table for models Bluebird Sylphy (G11, 2012–2020) as of 2026. Average prices are indicated including delivery and excluding painting.

Hood type	Manufacturer	Article	Price, ₽	Notes
Original (steel)	Nissan	62501-4M000	45 000 – 60 000	Suitable for all modifications 2012–2020.
Analogue premium	DY Auto (Japan)	DY-62501-4M0	28 000 – 35 000	Metal thickness 0.9 mm, minimal modification
Analogue average	Febi (Germany)	35306	22 000 – 30 000	Requires geometry check before painting
Budget analogue	China (no-name)	—	12 000 – 18 000	High risk of corrosion and inappropriate fastenings
Carbon fiber	Seibon (USA)	SB-NIS-BBS13-CF	80 000 – 120 000	Weight 60% less than steel, but brittle when impacted

Prices for painting and installation usually make up:

• 🎨 Painting (base color) — 15,000–25,000 ₽.
• 🔧 Replacement (with adjustment of hinges and lock) - 3,000–6,000 ₽.
• 🔄 Full cycle (hood + painting + installation) - from 60,000 ₽ for the original and from 40,000 ₽ for the analogue.

Step-by-step instructions for replacing the hood on a Nissan Bluebird Sylphy

Replacing the hood is a moderately difficult operation that you can do yourself if you have the tools and patience. The main thing is to maintain consistency and not damage the paintwork of adjacent parts. Below is the instruction for the models Bluebird Sylphy (G11, 2012–2020).

Required tools:

• 🔧 Set of heads (10 mm, 12 mm).
• 🔨 Screwdriver with flat and cross-shaped tip.
• 🧲 Magnet for fastening (so as not to lose the bolts).
• 🎨 Masking tape (to protect the wings).
• 🔗 Torque wrench (optional, for precise tightening).

Step 1. Removing the old hood

1. Open the hood and secure it with the stop.
2. Remove the plastic plugs from the hinges (pry them off with a screwdriver).
3. Unscrew the bolts securing the hinges to the hood (usually 4 bolts of 10 mm).
4. Disconnect the lock cable (you will need a screwdriver).
5. Remove the hood along with the hinges (preferably with an assistant - the part is heavy!).

Step 2. Transferring the hinges and lock to the new hood

If the hinges are in good condition, they can be transferred from the old hood. To do this:

1. Mark the position of the hinges on the new hood with a marker (use the old one as a template).
2. Drill holes for the bolts (if there are none).
3. Install hinges and tighten bolts without fatal effort (adjustment will be required later).
4. Move the lock and cable, check the free movement of the mechanism.

Step 3. Installation and adjustment

Reinstall the hood and make adjustments:

1. Check the gaps between the hood and fenders (should be the same on both sides).
2. Adjust the height of the hinges by tightening or loosening the bolts.
3. Check the operation of the lock: the hood should close without effort, but not “sag”.
4. Apply lubricant to the hinges (eg LIQUI MOLY LM 47) to prevent squeaks.

⚠️ Attention: If after installation the hood closes askew, do not try to “bend” it by force - this will lead to deformation. Instead, loosen the hinge bolts and adjust the position by hand.

What to do if the hood does not close?

If the hood does not lock, check:

1. Position of the lock - it could have moved during transfer.

2. Cable - it may be pinched or torn.

3. The lock spring - it could break over time.

As a last resort, temporarily secure the hood with zip ties, but do not operate the car in this condition!

Typical problems with the hood of Nissan Bluebird Sylphy and their solutions

Even with careful use, the hood Bluebird Sylphy may cause inconvenience. Let's look at the most common problems and how to fix them.

1. Creak when opening/closing

The reason usually lies in hinges are worn out or lack of lubrication. Solution:

• Clean the hinges from dirt with a wire brush.
• Apply graphite or lithium grease (don't use WD-40 - it's temporary!).
• If the squeak remains, check the play in the hinges - replacement may be required.

2. The hood “walks” or closes with a bang

This is a sign loose hinges or a deformed lock. How to fix:

• Tighten the hinge bolts with a torque wrench (tightening torque: 20–25 Nm).
• If the problem is with the lock, adjust its position or replace the spring.
• In extreme cases, you will have to align the hood on the slipway (in case of serious distortions).

3. Corrosion under the hood

Bluebird Sylphy is not one of the most corrosion-resistant models, especially at the junction of the hood and fenders. Prevention:

• 🧴 Treat with anticorrosive (Tectyl or Dinitrol) once every 2 years.
• 🚿 Wash the hood from the inside (especially in winter, after treating roads with reagents).
• 🔧 Check the drainage holes at the bottom of the hood - they should not be clogged with dirt.

4. Cracks or dents after an accident

If the hood is damaged, a complete replacement is not always required. Alternatives:

• 🔨 Straightening — suitable for small dents (price from 5,000 ₽).
• 🎨 Local painting — if only the varnish is damaged (from RUB 3,000).
• 🔄 Replacement with a used original - cheaper than new (price from 15,000 ₽ on disassembly).

Caring for your hood: how to extend its service life

Hood Nissan Bluebird Sylphy susceptible not only to mechanical damage, but also to environmental influences: UV rays, chemical reagents, bird droppings. Proper care will help avoid premature corrosion and loss of appearance.

1. Cleaning and protecting paintwork

• 🚿 Wash the hood soft sponge (not with a brush!) with car shampoo (for example, Karcher or Meguiar’s).
• 🛡️ Apply wax protective layer once every 3 months (wax Collinite 845 or Turtle Wax).
• 🌞 Avoid washing in direct sunlight - this leads to stains.

2. Anti-chip protection

The leading edge of the hood is most vulnerable to stone chips. Solutions:

• 🛡️ Install transparent protective film (For example, 3M Scotchgard or XPEL). The cost of pasting is from 8,000 ₽.
• 🎨 Use liquid glass (applies like wax, but lasts up to a year).
• 🚗 Park facing away from the road to reduce the risk of stones.

3. Caring for hinges and lock

• 🔧 Lubricate the hinges every six months lithium grease (not graphite - it gets dirty!).
• 🔑 Check the operation of the lock: if it starts to jam, clean the mechanism from dirt and lubricate it.
• 🧲 If rust appears on the hinges, remove it rust converter (Tsinkar) and paint.

4. Winter storage

• ❄️ After washing in winter, be sure to dry the hood, especially at the junction with the wings.
• 🧊 Do not use hot water to remove ice - this will damage the paintwork.
• 🚗 If the car is parked on the street, cover the hood breathable cover.

Hood modding: what can be done with the Nissan Bluebird Sylphy

If you want to highlight your Bluebird Sylphy, the hood is an excellent area for tuning. Let's look at popular modding options, their pros and cons.

1. Carbon fiber (carbon)

The carbon hood weighs 50–60% less than a steel hood, which improves weight distribution and dynamics. However, there are nuances:

• ✅ Pros: lighter, stronger in bending, aggressive appearance.
• ❌ Cons: high price (from 80,000 ₽), fragility due to pinpoint impacts, difficulty in repair.
• 🔧 Installation: requires modification of fastenings (carbon hoods often come without hinges).

2. Ventilation holes (hoods)

Installing hoods improves engine cooling and gives a sporty look. Options:

• 🔥 Functional thins - with real air intakes (for example, from Seibon).
• 🎨 Decorative stickers - imitation of hoods (cheap, but ineffective).

Important: incorrectly installed hoods can increase aerodynamic drag and even overheat the engine!

3. Pasting with vinyl or film

Vinyl allows you to change the color of the hood without painting. Popular options:

• 🖤 Matte vinyl - stylish, but requires careful care.
• 🌈 Chrome film - catchy, but gets scratched quickly.
• 🔥 Thermochromic film — changes color when heated (expensive, from 30,000 ₽).

4. Installing a hood from other Nissan models

Some owners install hoods from Nissan Sentra or Altima for a more aggressive look. However this requires:

• 🔧 Rework of fastenings and lock.
• 🎨 Complete repainting (colors rarely match).
• 📝 Registration of changes in the traffic police (if the geometry of the hood is very different).

⚠️ Attention: When installing non-certified hoods (for example, made of fiberglass), the insurance company may refuse to pay in case of an accident, citing inconsistent tuning.

FAQ: Frequently asked questions about the hood of the Nissan Bluebird Sylphy

Is it possible to install a hood from a Nissan Sentra on a Bluebird Sylphy?

Theoretically, yes, but serious modifications will be required: the hinges and lock are from Sentra do not fit the fastenings. In addition, the hood Sentra wider, so you will have to trim the wings or use adapter brackets. Such a replacement is only advisable for cruising, and not for daily use.

How often should hood hinges be lubricated?

It is recommended to lubricate the hinges every 10,000 km or every six months (whichever comes first). Use lithium grease (For example, LIQUI MOLY LM 47) - it does not attract dirt and lasts longer. Avoid WD-40: it will wash out after the first wash.

What to do if the hood closes askew after an accident?

First check:

1. Integrity of hinges - if they are bent, replacement will be required.
2. The position of the lock - it could move upon impact.
3. The geometry of the hood - if it “leads” (for example, one corner is higher than the other), straightening on the slipway will be required.

Do not try to straighten the hood with a hammer - this will worsen the deformation. Contact a body shop for diagnostics. 3D shelving.

How much does it cost to paint the hood to match the body color?

The cost depends on the type of paint and region:

• Basic painting (without varnish) - 15,000–20,000 rubles.
• Full cycle (primer + paint + varnish + polishing) - 25,000–40,000 ₽.
• Matte or pearlescent finish — from 50,000 ₽.

Tip: If the hood is new, ask a painter to paint it complete with hinges - this will prevent corrosion at the fastening points.

Is it possible to drive with a faulty hood latch?

Strongly not recommended! Even if the hood is secured with ties or rope, when driving at high speed it may open, which will lead to:

• Damage to the windshield.
• Loss of control (due to a sudden change in aerodynamics).
• Accidents with serious consequences.

Temporary solution: secure the hood nylon ties through the holes in the radiator grille, but repair the lock as quickly as possible!